SMD LED
Product Data Sheet
LTW-C191TLA
Spec No.: DS22-2005-083
Effective Date: 09/09/2010
Revision: C
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
* Meet ROHS, Green Product.
* Super thin (0.55H mm) Chip LED.
* Ultra bright InGaN White Chip LED.
* Package in 8mm tape on 7" diameter reels.
* Compatible with automatic placement equipment.
* Compatible with infrared reflow solder process.
* EIA STD package.
* I.C. compatible.
Package Dimensions
Part No.
LTW-C191TLA
Notes:
1. All dimensions are in millimeters (inches).
Lens
Yellow
Emitted Color
InGaN White
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
Part No. : LTW-C191TLA
BNS-OD-C131/A4
Page :
1
of
12
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute
Maximum
Ratings
At
Ta=25°C
LTW-C191TLA
70
100
20
0.25
5
-20°C to + 80°C
-40°C to + 85°C
260°C For 10 Seconds
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
DC Forward Current
Derating Linear From 25°C
Reverse Voltage
Operating Temperature Range
Storage Temperature Range
Infrared Soldering Condition
Unit
mW
mA
mA
mA/°C
V
Note:
Operating the LED (in an application) under reverse bias condition might result in damage or failure of the component
Suggest IR Reflow Condition :
Part No. : LTW-C191TLA
BNS-OD-C131/A4
Page :
2
of
12
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical
Optical
Characteristics
At
Ta=25°C
Parameter
Symbol
Part No.
LTW-
Min.
Typ.
Max.
Unit
Test Condition
Luminous Intensity
IV
C191TLA
112.0
300.0
mcd
IF = 10mA
Note 1, 2, 5
Viewing Angle
2
θ
1/2
C191TLA
130
deg
Fig.6
IF = 10mA
Note 3, 5
Fig.1
x
Chromaticity Coordinates
y
C191TLA
0.31
0.32
Forward Voltage
VF
C191TLA
2.80
3.40
V
IF = 10mA
Reverse Current
IR
C191TLA
10
μA
VR = 5V
Note : 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2. Iv classification code is marked on each packing bag.
3. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
5. Tester
CAS 140B is for the chromaticity coordinates (x, y) and Iv.
6. The chromaticity coordinates (x, y) guarantee should be added ± 0.01 tolerance.
Part No. : LTW-C191TLA
BNS-OD-C131/A4
Page :
3
of
12
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Typical
(25℃
Electrical
Ambient
/
Optical
Characteristics
Unless
Otherwise
Curves
Noted)
Temperature
Part No. : LTW-C191TLA
BNS-OD-C131/A4
Page :
4
of
12
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
