Through Hole Lamp
Product Data Sheet
LTL2V3EV3JSR
Spec No.: DS20-2010-0096
Effective Date: 09/21/2013
Revision: B
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
*
Lead (Pb) free product – RoHS compliant.
* Low power consumption.
* High efficiency.
* Versatile mounting on P.C. board or panel.
* I.C. Compatible/low current requirements.
* Popular T-1
3/4
diameter.
Package Dimensions
Part No.
LTL2V3EV3JSR
Lens
Water Clear
Source Color
AlInGaP Red
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25mm(.010") unless otherwise noted.
3. Protruded resin under flange is 1.0mm(.04") max.
4. Lead spacing is measured where the leads emerge from the package.
5. Specifications are subject to change without notice.
Part No. : LTL2V3EV3JSR
BNS-OD-C131/A4
Page :
1
of
10
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute Maximum Ratings at T
A
=25°C
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
DC Forward Current
Derating Linear From 30°C
Reverse Voltage
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature
[2.0mm(.08") From Body]
260°C for 5 Seconds Max.
100
50
0.84
5
-30°C to + 85°C
-40°C to + 100°C
mA
mA
mA/°C
V
Maximum Rating
125
Unit
mW
Part No. : LTL2V3EV3JSR
BNS-OD-C131/A4
Page :
2
of
10
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical / Optical Characteristics at T
A
=25°C
Parameter
Symbol
Min.
Typ.
Max.
Unit
Test Condition
I
F
= 20mA
Note 1
Note 2 (Fig.5)
Measurement
@Peak (Fig.1)
I
F
= 20mA
Note 4
Luminous Intensity
I
V
2θ
1/2
λ
P
λ
d
Δλ
4200
9300
mcd
Viewing Angle
30
deg
Peak Emission Wavelength
61
nm
Dominant Wavelength
619
625
630
nm
Spectral Line Half-Width
17
nm
Forward Voltage
V
F
1.8
2.1
2.4
V
μA
I
F
= 20mA
Reverse Current
I
R
100
V
R
= 5V
NOTE: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
eye-response curve.
2. θ
1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. Iv classification code is marked on each packing bag.
4. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
5. Iv guarantee should add
±
15% tolerance
6. Reverse voltage(V
R
) condition is applied for IR test only. The device is not designed for reverse operation.
7. The View Angle (2θ1/2) guarantee should be added ±2 deg tolerance.
Part No. : LTL2V3EV3JSR
BNS-OD-C131/A4
Page :
3
of
10
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Typical Electrical / Optical Characteristics Curves
(25°C Ambient Temperature Unless Otherwise Noted)
Part No. : LTL2V3EV3JSR
BNS-OD-C131/A4
Page :
4
of
10
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
