SMD LED
Product Data Sheet
LTW-C194TS5
Spec No.: DS22-2005-186
Effective Date: 10/10/2012
Revision: F
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Features
* Meet RoHS, Green Product
* Super thin (0.30 mm) Chip LED.
* Ultra bright InGaN White Chip LED.
* Package in 8mm tape on 7" diameter reels.
* Compatible with automatic placement equipment.
* Compatible with infrared reflow solder process.
* EIA STD package.
* I.C. compatible.
Package Dimensions
Part No.
LTW-C194TS5
Notes:
1. All dimensions are in millimeters (inches).
Lens
Yellow
Emitted Color
InGaN White
2. Tolerance is ± 0.10 mm (.004") unless otherwise noted.
3.The white mark may be cover by the lens
Part No. : LTW-C194TS5
BNS-OD-C131/A4
Page :
1
of
11
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Absolute
Maximum
Ratings
At
Ta=25°C
LTW-C194TS5
70
100
20
5
-20°C to + 80°C
-40°C to + 85°C
260°C For 10 Seconds
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
DC Forward Current
Reverse Voltage
Operating Temperature Range
Storage Temperature Range
Infrared Soldering Condition
Unit
mW
mA
mA
V
Note
: Operating the LED (in an application) under reverse bias condition might result in damage or failure of the component
Suggest IR Reflow Condition :
Part No. : LTW-C194TS5
BNS-OD-C131/A4
Page :
2
of
11
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical
Optical
Characteristics
At
Ta=25°C
Parameter
Symbol
Part No.
LTW-
Min.
Typ.
Max.
Unit
Test Condition
Luminous Intensity
IV
C194TS5
56.0
146.0
mcd
IF = 5mA
Note 1, 2, 5
Viewing Angle
2
θ
1/2
C194TS5
130
deg
Fig.6
IF = 5mA
Note 3, 5
Fig.1
x
Chromaticity Coordinates
y
C194TS5
0.294
0.286
Forward Voltage
VF
C194TS5
2.70
3.15
V
IF = 5mA
Reverse Current
IR
C194TS5
10
μA
VR = 5V
Note : 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2. Iv classification code is marked on each packing bag.
3. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
5. Tester
CAS140B is for the chromaticity coordinates (x, y) and Iv.
6. The chromaticity coordinates (x, y) guarantee should be added ± 0.01 tolerance.
Part No. : LTW-C194TS5
BNS-OD-C131/A4
Page :
3
of
11
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Typical
(25℃
Electrical
Ambient
/
Optical
Characteristics
Unless
Otherwise
Curves
Noted)
Temperature
Part No. : LTW-C194TS5
BNS-OD-C131/A4
Page :
4
of
11
ARM技术
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
