电子工程世界电子工程世界电子工程世界

关键词

搜索

型号

搜索
 

HLMA-QF00-NP031

器件型号:HLMA-QF00-NP031
器件类别:光电子/LED    光电   
厂商名称:AVAGO
厂商官网:http://www.avagotech.com/
下载文档

器件描述

T-3/4 SINGLE COLOR LED, RED, 1.78mm, PLASTIC PACKAGE-2

参数
参数名称属性值
厂商名称AVAGO
包装说明PLASTIC PACKAGE-2
Reach Compliance Codeunknow
颜色RED
配置SINGLE
最大正向电流0.05 A
透镜类型UNTINTED NONDIFFUSED
标称发光强度52.5 mcd
安装特点SURFACE MOUNT
功能数量1
端子数量2
最高工作温度100 °C
最低工作温度-40 °C
光电设备类型SINGLE COLOR LED
总高度2.92 mm
包装方法TAPE AND REEL 7\"
峰值波长635 nm
形状ROUND
尺寸1.78 mm
表面贴装YES
T代码T-3/4
视角15 deg

文档预览

HLMA-Qx00, HLMA-Px00 HLMT-Px00 and HLMT-Qx00
Subminiature High Performance AlInGaP LED Lamps
Data Sheet
SunPower Series
HLMA-PF00, HLMA-PG00, HLMA-PH00, HLMA-PL00, HLMA-QF00, HLMA-QG00, HLMA-QH00,
HLMA-QL00, HLMT-PG00, HLMT-PH00, HLMT-PL00, HLMT-QG00, HLMT-QH00, HLMT-QL00
Description
Flat Top Package
The HLMX-PXXX flat top lamps use an untinted, nondif-
fused, truncated lens to provide a wide radiation pattern
that is necessary for use in backlighting applications. The
flat top lamps are also ideal for use as emitters in light
pipe applications.
Features
Subminiature flat top package
Ideal for backlighting and light piping applications
Subminiature dome package
Nondiffused dome for high brightness
Wide range of drive currents
Colors: 590 nm Amber, 605 nm Orange, 615 nm Red-
dish-Orange, 622/626 nm Red, and 635 nm Red
Ideal for space limited applications
Axial leads
Available with lead configurations for surface mount
and through hole PC board mounting
Dome Packages
The HLMX-QXXX dome lamps use an untinted, nondif-
fused lens to provide a high luminous intensity within a
narrow radiation pattern.
Lead Configurations
All of these devices are made by encapsulating LED chips
on axial lead frames to form molded epoxy submini-
ature lamp packages. A variety of package configuration
options is available. These include special surface mount
lead configurations, gull wing, yoke lead, or Z-bend. Right
angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm
(0.200 inch) center spacing are available for through hole
mounting. For more information refer to Standard SMT
and Through Hole Lead Bend Options for Subminiature
LED Lamps data sheet.
Technology
These subminiature solid state lamps utilize one of the
two newly developed aluminum indium gallium phos-
phide (AlInGaP) LED technologies. The HLMT-Devices
are especially effective in very bright ambient lighting
conditions. The colors 590 nm amber, 605 nm orange,
615 nm reddish-orange, 622/626 nm red, and 635 nm red
are available with viewing angles of 15° for the domed
devices and 125° for the flat top devices.
Device Selection Guide
Part Number
HLMA-QL00
HLMT-QL00
HLMA-QJ00
HLMA-QH00
HLMT-QH00
HLMA-QG00
HLMT-QG00
HLMA-QF00
HLMA-PL00
HLMT-PL00
HLMA-PJ00
HLMA-PH00
HLMT-PH00
HLMA-PG00
HLMT-PG00
HLMA-PF00
d
(nm)
590
590
605
615
615
626
622
635
590
590
605
615
615
626
622
635
Typ. I
V
(mcd)
500
1000
500
500
800
500
1000
500
75
150
75
75
120
75
150
75
Package
Description
Domed,
Nondiffused,
Untinted
Viewing
Angle 2
1
/
2
15°
Package
Outline
B
Flat Top,
Nondiffused,
Untinted
125°
A
Absolute Maximum Ratings at T
A
= 25°C
Parameter
Peak Forward Current
[2]
Average Forward Current (I
PEAK
= 100 mA)
[1,2]
DC Forward Current
[3,5,6]
Power Dissipation
Reverse Voltage (I
R
= 100 μA)
Transient Forward Current (10 μs Pulse)
[5]
Operating Temperature Range
Storage Temperature Range
LED Junction Temperature
Lead Soldering Temperature [1.6 mm (0.063 in.) from body]
SMT Reflow Soldering Temperature
HLMA-xxxx
100
30
50
120
5
500
–40 to +100
–55 to +100
110
260°C for 5 seconds
260°C for 20 seconds
HLMT-xxxx
100
30
50
130
Unit
mA
mA
mA
mW
V
mA
°C
°C
°C
Notes:
1. Maximum I
AVG
at f = 1 kHz.
2. Refer to Figure 5 to establish pulsed operating conditions.
3. Derate linearly as shown in Figure 4.
4. The transient peak current is the maximum non-recurring peak current these devices can withstand without damaging the LED die and wire
bonds. Operation at currents above Absolute Maximum Peak Forward Current is not recommended.
5. Drive currents between 10 mA and 30 mA are recommended for best long term performance.
6. Operation at currents below 5 mA is not recommended, please contact your Avago sales representative.
2
Part Numbering System
HLMx - x x 00 - x x x xx
Packaging Option
00: Straight Leads, Bulk Packaging, Quantity of 500 parts
11: Gull Wing Bend, Tape & Reel – 7" Reel
12: Gull Wing Bend, Bulk
14: Gull Wing Bend, Tape & Reel – 13" Reel
21: Yoke Bend, Tape and Reel – 7" Reel
22: Yoke Bend, Bulk
24: Yoke Bend, Tape and Reel – 13" Reel
31: Z-Bend, Tape and Reel – 7" Reel
32: Z-Bend, Bulk
34: Z-Bend, Tape and Reel – 13" Reel
Color Bin Selection
0: Full Color Bin Distribution
B: Color Bins 2 & 3
K: Color Bins 2, 3 & 4
R: Color Bins 2 & 4
W: Color Bins 2, 4, 6 & 7
X: Color Bins 4, 6 & 7
Maximum Iv Bin Options
Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Color Options
L: Amber 590 nm
J: Orange 605 nm
H: Reddish Orange 615 nm
G: Red 622/626 nm
F: Red 635 nm
Package Options
Q: Dome
P: Flat Top
3
Package Dimensions
(A) Flat Top Lamps
0.50 (0.020) REF.
11.68 (0.460)
10.67 (0.420)
BOTH SIDES
1.40 (0.055)
1.65 (0.065)
CATHODE
(B) Domed Lamps, Diffused and Nondiffused
0.50 (0.020) REF.
11.68 (0.460)
10.67 (0.420)
BOTH SIDES
CATHODE
ANODE
1.65 (0.065)
1.91 (0.075) DIA.
0.20 (0.008) MAX.
0.46 (0.018)
0.56 (0.022)
0.25 (0.010) MAX.
NOTE 2
ANODE
1.65 (0.065)
1.91 (0.075) DIA.
0.20 (0.008) MAX.
0.46 (0.018)
0.56 (0.022)
0.25 (0.010) MAX.
NOTE 2
2.21 (0.087)
1.96 (0.077)
1.14 (0.045)
1.40 (0.055)
0.18 (0.007)
0.23 (0.009)
2.03 (0.080)
1.78 (0.070)
0.63 (0.025)
0.38 (0.015)
2.44 (0.096)
1.88 (0.074)
2.21 (0.087)
1.96 (0.077)
0.76 (0.030) R.
0.89 (0.035)
0.94 (0.037)
1.24 (0.049)
2.92
(0.115)
MAX.
0.63 (0.025)
0.38 (0.015)
2.08 (0.082)
2.34 (0.092)
0.79 (0.031) MAX.
0.18 (0.007)
0.23 (0.009)
2.08 (0.082)
2.34 (0.092)
0.79 (0.031)
0.53 (0.021)
CATHODE
STRIPE
CATHODE
STRIPE
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETRES (INCHES).
2. PROTRUDING SUPPORT TAB IS CONNECTED TO CATHODE LEAD.
Package Mounting
CATHODE
TAB
NO. ANODE DOWN.
YES. CATHODE DOWN.
Proper right angle mounting to a PC board to prevent protruding cathode tab from shorting to anode connection.
4
Optical Characteristics at T
A
= 25°C
Total Flux
V
(mlm)
@ 20 mA
[2]
Typ.
250
250
250
250
250
250
250
250
800
250
250
250
250
800
800
250
250
800
250
250
250
250
250
800
250
250
800
250
800
250
Part Number
HLMA-QL00-S00xx
HLMA-QL00-TU0xx
HLMA-QL00-TUKxx
HLMA-QL00-TVBxx
HLMA-QL00-TVKxx
HLMA-QL00-UV0xx
HLMA-QL00-UVRxx
HLMA-QL00-UWBxx
HLMT-QL00-T00xx
HLMA-QJ00-S00xx
HLMA-QH00-S00xx
HLMA-QH00-T00xx
HLMA-QH00-UW0xx
HLMT-QH00-T00xx
HLMT-QH00-WX0xx
HLMA-QG00-S00xx
HLMA-QG00-TV0xx
HLMT-QG00-T00xx
HLMA-QF00-S00xx
HLMA-PL00-N00xx
HLMA-PL00-PRRxx
HLMA-PL00-PRXxx
HLMA-PL00-QRXxx
HLMT-PL00-P0Wxx
HLMA-PJ00-N00xx
HLMA-PH00-N00xx
HLMT-PH00-P00xx
HLMA-PG00-N00xx
HLMT-PG00-P00xx
HLMA-PF00-N00xx
Luminous Intensity
I
V
(mcd) @ 20 mA
[1]
Min.
Typ.
Max.
160
250
250
250
250
400
400
400
250
160
160
250
400
250
1000
160
250
250
160
25
40
40
63
40
25
25
40
25
40
25
500
1000
500
500
500
500
500
1000
500
75
150
75
75
120
75
150
75
800
800
1250
1250
1250
1250
2000
2000
3200
1250
200
200
200
Peak
Wavelength
peak
(nm)
Typ.
592
592
592
592
592
592
592
592
592
609
621
621
621
621
621
635
635
635
650
592
592
592
592
592
609
621
621
635
635
640
Color,
Dominant
Wavelength
d[3]
(nm)
Typ.
590
590
590
590
590
590
590
590
590
605
615
615
615
615
615
626
626
622
635
590
590
590
590
590
605
615
615
626
622
635
Viewing
Angle
2
1/2
Degrees
[4]
Typ.
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
125
125
125
125
125
125
125
125
125
125
125
Luminous
Efficacy
v[5]
(lm/w)
Typ.
480
480
480
480
480
480
480
480
480
370
263
263
263
263
263
150
150
150
110
480
480
480
480
480
370
263
263
150
150
110
Notes:
1. The luminous intensity, I
v
, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be
aligned with this axis.
2.
v
is the total luminous flux output as measured with an integrating sphere.
3. The dominant wavelength,
d
, is derived from the CIE Chromaticity Diagram and represents the color of the device.
4.
1/2
is the off-axis angle where the liminous intensity is 1/2 the peak intensity.
5. Radiant intensity, I
e
, in watts/steradian, may be calculated from the equation I
e
= I
v
/
v
, where I
v
is the luminous intensity in candelas and
v
is
the luminous efficacy in lumens/watt.
5
出几个新的STM32F407开发板
本帖最后由ddllxxrr于2016-1-716:52编辑本人设计的STM32F407开发板FSTMF4,拥有168MHz主频的ST公司的Cortex-M4高性能带FPU功能的集成芯片. 开发板不仅拥有摄像头,以太网,还具有板载的JLINK,不再为JLINK而烦恼,也不需要把JLINK和开发板连在一起.支持USB供电和外部供电(外部供电优先,自动切换). 直接向CM4进发吧,FFT不再变得慢而拖后退,硬件FPU会助你一臂之力. FSTMF4开发板带有多种常用接口和高级接口,不...
fstmf4_board 淘e淘
看到一个高手碰到的问题,你能解吗?
主题:100KW光伏并网逆变器输出电流尖峰分析 系统描述:100KW的三相并网逆变器采用单级式的结构。 直流支撑电容为10000UF,采用层压母排与英飞凌1200V的双管IGBT(FF600R12IE4)进行连接,IGBT驱动是用的CONCEPT公司生产专门针对英飞凌IGBT的驱动器.第一版的电压尖峰吸收电路是每个IGBT桥臂并联一个1.5uF的穿芯电容,第二版...
安_然 模拟电子
最全电源电路图详解
用电路元件符号表示电路连接的图,叫电路图。电路图是人们为研究、工程规划的需要,用物理电学标准化的符号绘制的一种表示各元器件组成及器件关系的原理布局图,可以得知组件间的工作原理,为分析性能、安装电子、电器产品提供规划方案。 电路图是电子工程师必学的基本技能之一,本文集合了稳压电源、DCDC转换电源、开关电源、充电电路、恒流源相关的经典电路资料,为工程师提供最新鲜的电路图参考资料,超全超详细,只能帮你到这了! 一、稳压电源 1、3~25V电压可调稳压电路图 ...
木犯001号 电源技术
SEED-DIM3517试用名单确定
通过合众达工程师的审核,以下网友获得2个月的试用期:wangqy、rivita、paulhyde期待您完成项目,分享心得!感谢其他网友的参与,敬请关注其他活动!SEED-DIM3517试用名单确定...
EEWORLD社区 ARM技术
【DIY 个浪漫光影棒】DIY汇总
当初的活动帖:【EEWORLD带你DIY】DIY个浪漫光影棒,报名请跟帖! 网友DIY秀 上传一个DIY山寨版的光影棒设计方案——by忙忙草 双核单片机LS2051光影棒的原理图——bynjlianjian 摇摇棒制作——linxue968 发个摇摇棒带原理图,程序——yc6602 DIYLED摇摇棒——dx2004025 分享一个十字点阵的c程序(旋转的摇摇棒)——zszhere 成品LED摇摇棒电路图——半导体狂人 32位摇摇棒——ginny 一个网友做的摇摇棒~...
okhxyyo DIY/开源硬件专区
心情沮丧啊。。。
刚刚了看,里面有句话很让我沮丧啊:卖包子的都比工程师强! 研发:产业链的源头,资金链的末尾; 销售:产业链的末尾,资金链的源头; 研发人员是那里面最累的,钱拿的是最少的(指回报率),在一个行业坚持下去的没几人,还劝说周围的年轻人除非兴趣否则别考工科,别做技术员,卖包子的都比工程师强! 我刚接触单片机三四个月,满腔的激情啊,冷水! 你们大家也都这样吗?技术员这么悲剧??? 心情沮丧啊。。。...
jackychao 嵌入式系统

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2022 EEWORLD.com.cn, Inc. All rights reserved