电子工程世界电子工程世界电子工程世界

关键词

搜索

型号

搜索
 

HD64F2166

器件型号:HD64F2166
厂商名称:Renesas(瑞萨电子)
厂商官网:https://www.renesas.com/
下载文档

器件描述

16-Bit Single-Chip Microcomputer

文档预览

REJ09B0078-0300Z
16
H8S/2168
Group
Hardware Manual
Renesas 16-Bit Single-Chip Microcomputer
H8S Family / H8S/2100 Series
H8S/2168
H8S/2167
H8S/2166
HD64F2168
HD64F2167
HD64F2166
Rev.3.00
Revision Date: Mar. 12, 2004
Rev. 3.00, 03/04, page ii of xl
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and
more reliable, but there is always the possibility that trouble may occur with them. Trouble with
semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or
(iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas
Technology Corp. product best suited to the customer's application; they do not convey any license
under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or
a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-
party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or
circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are
subject to change by Renesas Technology Corp. without notice due to product improvements or
other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or
an authorized Renesas Technology Corp. product distributor for the latest product information
before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising
from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means,
including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total
system before making a final decision on the applicability of the information and products. Renesas
Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the
information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or
system that is used under circumstances in which human life is potentially at stake. Please contact
Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when
considering the use of a product contained herein for any specific purposes, such as apparatus or
systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in
whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must
be exported under a license from the Japanese government and cannot be imported into a country
other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the
country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products
contained therein.
Rev. 3.00, 03/04, page iii of xl
General Precautions on Handling of Product
1. Treatment of NC Pins
Note: Do not connect anything to the NC pins.
The NC (not connected) pins are either not connected to any of the internal circuitry or are
used as test pins or to reduce noise. If something is connected to the NC pins, the
operation of the LSI is not guaranteed.
2. Treatment of Unused Input Pins
Note: Fix all unused input pins to high or low level.
Generally, the input pins of CMOS products are high-impedance input pins. If unused pins
are in their open states, intermediate levels are induced by noise in the vicinity, a pass-
through current flows internally, and a malfunction may occur.
3. Processing before Initialization
Note: When power is first supplied, the product’s state is undefined.
The states of internal circuits are undefined until full power is supplied throughout the
chip and a low level is input on the reset pin. During the period where the states are
undefined, the register settings and the output state of each pin are also undefined. Design
your system so that it does not malfunction because of processing while it is in this
undefined state. For those products which have a reset function, reset the LSI immediately
after the power supply has been turned on.
4. Prohibition of Access to Undefined or Reserved Addresses
Note: Access to undefined or reserved addresses is prohibited.
The undefined or reserved addresses may be used to expand functions, or test registers
may have been be allocated to these addresses. Do not access these registers; the system’s
operation is not guaranteed if they are accessed.
Rev. 3.00, 03/04, page iv of xl
Configuration of This Manual
This manual comprises the following items:
1.
2.
3.
4.
5.
6.
General Precautions on Handling of Product
Configuration of This Manual
Preface
Contents
Overview
Description of Functional Modules
• CPU and System-Control Modules
• On-Chip Peripheral Modules
The configuration of the functional description of each module differs according to the
module. However, the generic style includes the following items:
i) Feature
ii) Input/Output Pin
iii) Register Description
iv) Operation
v) Usage Note
When designing an application system that includes this LSI, take notes into account. Each section
includes notes in relation to the descriptions given, and usage notes are given, as required, as the
final part of each section.
7. List of Registers
8. Electrical Characteristics
9. Appendix
10. Main Revisions and Additions in this Edition (only for revised versions)
The list of revisions is a summary of points that have been revised or added to earlier versions.
This does not include all of the revised contents. For details, see the actual locations in this
manual.
11. Index
Rev. 3.00, 03/04, page v of xl
与HD64F2166相近的元器件有:H8S-2168、H8S/2166、H8S/2167、H8S/2168、HD64F2168、HD64F2167。描述及对比如下:
型号 HD64F2166 H8S-2168 H8S/2166 H8S/2167 H8S/2168 HD64F2168 HD64F2167
描述 16-Bit Single-Chip Microcomputer 16-Bit Single-Chip Microcomputer 16-Bit Single-Chip Microcomputer 16-Bit Single-Chip Microcomputer 16-Bit Single-Chip Microcomputer 16-Bit Single-Chip Microcomputer 16-Bit Single-Chip Microcomputer
nrf905 通讯
单片机发送完一条指令后变为接收状态,正常情况下应不断询问DR是否为高,但程序却停在while(AM_...
zzbaizhi 微控制器 MCU
自制STEVAL-IPM05F 3Sh板:FOC电机控制400V/8A 无感/有感霍尔/有感编码器等参考程...
本帖最后由 music_586 于 2019-4-4 19:06 编辑 此内容由EEWO...
music_586 电机驱动控制(Motor Control)
Wi-Fi逐渐普及 网络安全问题迫在眉睫
随着Wi-Fi网络在美国家庭中的不断普及,越来越多的人都受到了诸如间谍件等危险因素带来的威胁,因此对...
yxh99 RF/无线
利用TMS320LF2407实现SPWM
所谓SPWM即PWM中脉冲宽度按正弦规律变化.由采样理论:冲量相等而形状不同的窄脉冲加在具有惯性...
Aguilera DSP 与 ARM 处理器
说光耦隔离继电器保护电路设计
本帖最后由 qwqwqw2088 于 2015-10-6 19:57 编辑 光耦亦称光电隔离器或...
qwqwqw2088 模拟与混合信号
数字万用表问题!~
本帖最后由 ddllxxrr 于 2016-1-7 17:03 编辑 大家帮忙推荐一下数字万用表,...
wanghongyang 淘e淘

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2022 EEWORLD.com.cn, Inc. All rights reserved