CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
XDCP is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
Dual Digitally Controlled Potentiometers
• Dual solid-state potentiometers
• Independent Up/Down interfaces
• 32 wiper tap points per potentiometer
—Wiper position stored in nonvolatile memory
and recalled on power-up
• 31 resistive elements per potentiometer
—Maximum resistance tolerance ± 25%
—Terminal voltage, 0 to V
• Low power CMOS
= 5V ± 10%
—Active current, 200µA typ.
—Standby current, 4µA max
• High reliability
—Endurance 200,000 data changes per bit
—Register data retention, 100 years
value = 50kΩ
The Intersil X93255 is a dual digitally controlled
potentiometer (XDCP). The device consists of two
resistor arrays, wiper switches, a control section, and
nonvolatile memory. The wiper positions are controlled
by individual Up/Down interfaces.
A potentiometer is implemented by a resistor array
composed of 31 resistive elements and a wiper switching
network. The position of each wiper element is controlled
by a set of independent CS, U/D, and INC inputs. The
position of the wiper can be stored in nonvolatile memory
and then be recalled upon a subsequent power-up
Each potentiometer is connected as a two-terminal
variable resistor and can be used in a wide variety of
– bias and gain control
– LCD Contrast Adjustment
Data Sheet March 4, 2005