电子工程世界电子工程世界电子工程世界

产品描述

搜索

SHT30-DIS-P2.5KS

器件型号:SHT30-DIS-P2.5KS
器件类别:传感器   
厂商名称:Sensirion
标准:
下载文档

器件描述

Sensor Hardware & Accessories SHT30 Protective Cover Option (no sensor included)

参数
产品属性属性值
Product AttributeAttribute Value
制造商:
Manufacturer:
Sensirion
产品种类:
Product Category:
Sensor Hardware & Accessories
RoHS:YES
产品:
Product:
Protective Cover
用于:
For Use With:
SHT30 Humidity and Temperature Sensors
封装:
Packaging:
Cut Tape
封装:
Packaging:
Reel
系列:
Series:
SHT3x
商标:
Brand:
Sensirion
产品类型:
Product Type:
Sensor Hardware
工厂包装数量:
Factory Pack Quantity:
2500
子类别:
Subcategory:
Sensors
零件号别名:
Part # Aliases:
1-101461-01

SHT30-DIS-P2.5KS器件文档内容

     Datasheet Protective Cover Option

     For SHT3x Humidity and Temperature Sensors

       Protects           the     sensor        against      pollution  during

        assembly processes

       Enables cost-effective brush-over and spray-over

        conformal coating procedures

       Withstands multiple standard reflow cycles

       Removable with tweezers at end-of-line

       Delivered in T&R packaging

Product Summary

The SHT3x protective cover is a polyimide foil, dedicated         application procedures of conformal coating material.

to protect the sensor opening from pollution. The sensor          The    protective        cover   can     be  easily  removed        with

is delivered with the protective cover attached such that         tweezers at the end of the assembly process to allow for

the sensor opening is completely covered and sealed.              proper sensor operation.

This enables cost-effective brush-over and spray-over

Datasheet: Intention of Use

This    datasheet      is  meant   to  provide   all  relevant    in Table 1, together with their respective order number.

specifications for the additional protective cover option of      Any further information about sensor performance,

the RH&T-sensors of type SHT3x. All SHT3x products                communication protocols etc. are to be found in the

coming    with    the  protective  cover  option     are  listed  respective main datasheets, only.

1       General information                                       and other possible pollutants during production process.

                                                                  However,            the  cover   does        not     protect  sensor

The SHT3x protective cover is an optional polyimide foil,         contamination            by    volatile  chemicals   resulting  from

directly attached to the top surface of the sensor. It            outgassing or curing of the conformal coating. Sensirion

covers the complete sensing area of the SHT3x and thus            recommends to cure conformal coatings according to

acts as a reliable shield against pollution during SMT            supplier specifications (temperature und timing) and to

assembly of the sensor and subsequent processes such              provide        for    increased  ventilation.     Further     extended

as conformal coating or potting. The protective cover is          curing         times     will  additionally  reduce  the      risk  of

designed      to  withstand  multiple    reflow  cycles.  After   contamination. More details on contamination and a list

assembly and for proper operation of the sensor the               of suitable conformal coatings can be found in the

cover tape must be removed.                                       document “SHTxx Handling Instructions”, downloadable

The cover features a flap that extends over the outside           from our website.

dimension of the sensor package on one side. This flap            As the cover flap extends over one side of the sensor,

is designed to allow the cover to be peeled off easily by         please keep in mind that the underneath area of the PCB

using tweezers. After peel-off the sensor will operate            will not be coated. The relevant dimensions are sketched

regularly as specified in the respective datasheet.               in Figure 1 which will help proper PCB design. The two

All  typical  application    procedures   such   as   brushing,   metallic contacts which are in the side wall of the sensor

spraying or potting can be used as long as the protective         and lay under the protective cover do not need conformal

cover is attached. The cover will effectively protect the         coating, as they are electrically grounded.

sensor opening from direct exposure to these coatings

www.sensirion.com                                     February 2016 - Version 2                                                       1/4
Datasheet Protective Cover Option

Handling and storage recommendations in the “SHTxx               3  Technical Drawing

handling instructions” document also apply to sensors

with the protective cover option.

After  reflow  soldering  the      sensor  will   need      a

reconditioning procedure if immediate functional testing

is desired. Details on the reconditioning steps are listed

in “SHTxx handling instructions”.

2      Ordering Information

The SHT3x protective cover can be ordered in tape and

reel packaging in different reel sizes given in Table 1.

The reels are delivered in sealed ESD bags.

       Name               Quantity         Order Number          Figure 1 Dimensional drawing of SHT3x protective cover

   SHT30-DIS-P10kS        10’000           1-101326-01           sensor package. Pin 1 is indicated through the cut corner

   SHT31-DIS-P10kS        10’000           1-101472-01           of the flap.

   SHT30-LSS-P10kS        10’000           1-101342-01

Table 1 SHT3x protective cover ordering options.

4      Land Pattern

For recommended metal land pattern please refer to the respective SHT3x data sheet. In case conformal coating is used,

it is not recommended to place components or open metal surfaces on the PCB underneath the extension flap of the

protective cover because this area will not be coated properly.

www.sensirion.com                                 February 2016 - Version 2                                                 2/4
Datasheet Protective Cover Option

5    Shipping Package

Figure 2 Technical drawing of the packaging tape with sensor orientation in tape. Header tape is to the right and trailer

tape to the left on this drawing. Dimensions are given in millimeters.

6    Quality

6.1   Material Contents

The device is fully RoHS and WEEE compliant, e.g. free

of Pb, Cd, and Hg.

Revision History

Date                Version        Page(s)  Changes

3. July 2015        1              all      Initial release

February 2016       2              all      Update on use and applicability of protective cover;

                                            New available products

www.sensirion.com                           February 2016 - Version 2                                                      3/4
Datasheet Protective Cover Option

Important Notices

Warning, Personal Injury

Do not use this product as safety or emergency stop devices or                      such defects shall be found, to SENSIRION’s reasonable

in any other application where failure of the product could result                   satisfaction, to have arisen from SENSIRION’s faulty design,

in personal injury. Do not use this product for applications other                   material, or workmanship;

than its intended and authorized use. Before installing, handling,                  the defective product shall be returned to SENSIRION’s

using or servicing this product, please consult the data sheet                       factory at the Buyer’s expense; and

and application notes. Failure to comply with these instructions                    the warranty period for any repaired or replaced product shall

could result in death or serious injury.                                             be limited to the unexpired portion of the original period.

                                                                                This warranty does not apply to any equipment which has not been

If the Buyer shall purchase or use SENSIRION products for any                   installed   and  used  within  the    specifications     recommended        by

unintended  or    unauthorized   application,  Buyer    shall  defend,          SENSIRION for the intended and proper use of the equipment.

indemnify   and   hold  harmless    SENSIRION  and      its    officers,        EXCEPT      FOR  THE   WARRANTIES          EXPRESSLY     SET           FORTH

employees, subsidiaries, affiliates and distributors against all claims,        HEREIN,     SENSIRION          MAKES      NO  WARRANTIES,              EITHER

costs, damages and expenses, and reasonable attorney fees arising               EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT. ANY

out of, directly or indirectly, any claim of personal injury or death           AND  ALL    WARRANTIES,        INCLUDING      WITHOUT             LIMITATION,

associated  with  such  unintended  or    unauthorized  use,   even       if    WARRANTIES       OF    MERCHANTABILITY        OR         FITNESS       FOR  A

SENSIRION shall be allegedly negligent with respect to the design or            PARTICULAR       PURPOSE,      ARE    EXPRESSLY          EXCLUDED          AND

the manufacture of the product.                                                 DECLINED.

ESD Precautions                                                                 SENSIRION is only liable for defects of this product arising under the

The inherent design of this component causes it to be sensitive to              conditions of operation provided for in the data sheet and proper use

electrostatic discharge (ESD). To prevent ESD-induced damage                    of the goods. SENSIRION explicitly disclaims all warranties, express

and/or degradation, take customary and statutory ESD precautions                or implied, for any period during which the goods are operated or

when handling this product.                                                     stored not in accordance with the technical specifications.

See application note “ESD, Latchup and EMC” for more information.               SENSIRION        does  not  assume    any     liability  arising  out  of  any

                                                                                application or use of any product or circuit and specifically disclaims

Warranty                                                                        any and all liability, including without limitation consequential or

SENSIRION warrants solely to the original purchaser of this product             incidental  damages.   All     operating  parameters,    including     without

for a period of 12 months (one year) from the date of delivery that this        limitation recommended parameters, must be validated for each

product shall be of the quality, material and workmanship defined in            customer’s       applications  by     customer’s         technical     experts.

SENSIRION’s published specifications of the product. Within such                Recommended parameters can and do vary in different applications.

period, if proven to be defective, SENSIRION shall repair and/or                SENSIRION reserves the right, without further notice, (i) to change

replace this product, in SENSIRION’S discretion, free of charge to the          the product specifications and/or the information in this document and

Buyer, provided that:                                                           (ii) to improve reliability, functions and design of this product.

  notice in writing describing the defects shall be given to                   Copyright © 2016, by SENSIRION.

   SENSIRION within fourteen (14) days after their appearance;                  CMOSens® is a trademark of Sensirion

                                                                                All rights reserved

Headquarters and Subsidiaries

   Sensirion AG                                Sensirion Inc., USA                                     Sensirion Korea Co. Ltd.

   Laubisruetistr. 50                          Phone:          +1 805 409 4900                         Phone:  +82 31 337 7700~3

   CH-8712 Staefa ZH                           info_us@sensirion.com                                   info@sensirion.co.kr

   Switzerland                                 www.sensirion.com                                       www.sensirion.co.kr

   Phone:   +41 44 306 40 00                   Sensirion Japan Co. Ltd.                                Sensirion China Co. Ltd.

   Fax:     +41 44 306 40 30                   Phone: +81 3 3444 4940                                  Phone: +86 755 8252 1501

   info@sensirion.com                          info@sensirion.co.jp                                    info@sensirion.com.cn

   www.sensirion.com                           www.sensirion.co.jp                                     www.sensirion.com.cn

To find your local representative, please visit ww.sensirion.com/contact

www.sensirion.com                                       February 2016 - Version 2                                                                          4/4
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory,   Delivery  &  Lifecycle  Information:

Sensirion:

SHT30-DIS-P2.5KS  SHT31-DIS-P2.5KS
小广播

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京ICP证060456号 京ICP备10001474号 电信业务审批[2006]字第258号函 京公海网安备110108001534 Copyright © 2005-2020 EEWORLD.com.cn, Inc. All rights reserved