RS9113 Connect-io-n® Module Family 3
PRODUCT BRIEF R
1x1 802.11abgn + BT4.0 + ZigBee
The RS9113 Connect-io-n® module is based on Redpine Signals RS9113 ultra-low-power, single spatial stream, dual-band 802.11n + Bluetooth (BT4.0) + ZigBee (ZB)
Convergence SoC. The RS9113 module is a complete IEEE 802.11 a/b/g/n, ZB and BT wireless device server that provides a wireless interface to any equipment with a SDIO,
UART, SPI or USB interface. The RS9113 module integrates a multi-threaded MAC processor with integrated analog peripherals and support for digital peripherals, baseband
digital signal processor, analog front-end, crystal oscillator, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity
switch and Quad-SPI Flash thus providing a fully-integrated solution for embedded wireless applications and all WLAN, BT and ZB protocols and networking stack functionality
in embedded firmware to make a fully self-contained wireless solution for a variety of applications. The module integrates an antenna and a U.FL connector for external antenna
with an option to select either one of them. The M2MCombo (RS9113) chips and modules leverage and improve upon Redpine’s proven low power innovations from Lite-FiTM
products (RS9110) and provide WLAN 802.11n, BT4.0 and ZB convergence solution For integration into mobile and M2M communication devices.
Features and Benefits
T RS9113 Connect-io-n module integrates WLAN, BT 4.0 and ZigBee functions.
T WLAN: Compliant to IEEE 802.11 a/b/g/n with dual band support.
T Bluetooth: Compliant to dual-mode Bluetooth V4.0
T ZigBee: Compliant to IEEE 802.15.4
T Supports both 20MHz and 40MHz bandwidth.
T WLAN transmit power up to +18dBm and receiver with sensitivity of -97dBm. Module without integrated antenna Module with integrated antenna
T Support for Bluetooth Transmit power class-1 with integrated PA and high performance Applications
Bluetooth receiver with -94dBm Rx sensitivity. T IoT Devices T Music and video players
T Support for multiple ZigBee output powers up to +19dBm with integrated PA and high T VoWi-Fi phones T Medical Devices
perform ance ZigBee receiver with -100dBm Rx sensitivity. T Smart Meters and in-home displays T Industrial monitoring and control
T U.FL connector for external antenna connection is selectable. T Industrial automation and telemetry T Home and building automation
T Dual external antenna (diversity supported). T Wi-Fi-BT gateway device T Wi-Fi-ZB gateway device
T Embedded WLAN stack, ZigBee stack, BT stack, TCP/IP stack, HTTP server. T Wireless headset
T Support for Embedded Client mode and Access Point mode.
T BT profile support for GAP,SDN,PAN,SPP,IAP,HFP 1.5,GATT,ATTR,IAP,A2DP,ACRP.† Evaluation Package
T Supports SPI, UART, USB, SDIO host interfaces. The evaluation package comprises RS9113 Connect-io-n module based evaluation
T Can operate with 8-bit microcontrollers with no OS. board. This is accompanied by driver source code for host interface, firmware and
T Single supply 3.0 to 3.6 V operation. documentation.
RS9113 Module Block Diagram without integrated antenna RS9113 Module Block Diagram with integrated antenna
Wireless Specifications Device Ordering Information
Network Standard Support IEEE 802.11 a/b/g/n, 802.11j†, 802.11d/e/i, 802.11w†, 802.1X, 802.11k†, The device numbering is based on the following naming convention. All the devices are labeled as
802.11v†, 802.11r†, 802.11h† RS9113-XYZ-ABC Where,
Bluetooth v2.1 EDR, v4.0
Data Rates 802.11n: from 6.5 Mbps to 150 Mbps (MCS 0-7)
802.11a/g: from 6 Mbps to 54 Mbps
802.11b: from 1 Mbps to 11 Mbps
Bluetooth: 1, 2, 3Mbps
Modulation Techniques OFDM with BPSK, QPSK, 16-QAM, 64-QAM
802.11b with CCK and DSSS
Bluetooth: GFSK, DQPSK, 8DPSK
802.11n Advanced Features 1-SS, 40MHz bandwidth, Greenfield Preamble, Short-GI, 1 spatial stream
STBC, RIFS, A-MSDU, A-MPDU, Aggregation with Block-ack, A-MSDU Examples:
inside A-MPDU and Virtual AP support T RS9113-NBZ-S0N will refer to single band n-Link module with no antenna and integrated Wi-Fi,
Bluetooth Advanced Features† Scatternet, Adaptive Frequency Hopping, Interlaced scanning, Bluetooth and Zigbee.
15 active slaves in proprietary mode, hold, sniff and park modes T RS9113-N00-D1C will refer to a dual band Connect-io-n module with embedded single antenna and
ZigBee Advanced Features CCM* security, orphan scanning, coordinator realignment T RS9113-NB0-S0W will refer to a single band WiSeConnect module with no antenna and integrated
Wi-Fi and Bluetooth.
Wi-Fi modes Wi-Fi client, Access point, Wi-Fi Direct
Bluetooth Modes Master, slave, scatternet† Module Reference Design
ZigBee Modes ZigBee Coordinator†, Router†, End device Redpine offers form-factor SPI, USB2.0, UART and SDIO reference designs along with software for
QoS WMM and WMM Power Save Support manufacture testing and diagnostics. For details on availability please contact sales
Host Interfaces USB 2.0, SPI, UART
Other Peripherals/Interfaces I2C, I2S, SPI, QSPI, USART, GPIO, JTAG, Analog(ADC/DAC) and
Supply Voltage 3.0-3.6V, 1.8-3.6V
Operating Temperature Industrial Grade -40ºC to +85ºC
Software and Regulatory Certification Wi-Fi Alliance Compliance (802.11bgn, WPA, WPA2 Personal and
Enterprise, WMM, WMM-PS, WPS, Wi-Fi Direct™, Voice-Personalβ,
Protected management frames†),
Cisco CCX v5†,
Worldwide Regulatory Compliance:
FCC (IDs are XF6-RS9113SB, XF6-RS9113DB)
IC (IDs are 8407A-RS9113SB, 8407A-RS9113DB)
Typical Transmit Wi-Fi: 17.5 dBm for 802.11b DSSS
Power(+/-2 dBm) 17.5 dBm for 802.11g/n OFDM
12 dBm for 802.11a/g/n OFDM
Bluetooth: 15 dBm
ZigBee : 15 dBm
Rx sensitivity Wi-Fi: 1Mbps -97 dBm (< 8% PER)
(+/- 1dBm) 54 Mbps -76.5 dBm (< 10% PER)
MCS7(20MHz) -73 dBm (< 10% PER)
MCS7(40MHz) -69.5 dBm (< 10% PER)
Bluetooth: 1 Mbps -94 dBm
2 Mbps -92 dBm
3 Mbps -84 dBm
BTLE(1Mbps) -91 dBm
ZigBee: 250 Kbps -102 dBm (< 8% PER)
†: These features may not be supported by current software releases. Contact Repine Signals Sales (firstname.lastname@example.org) for details.
‡: These certifications are in progress at this time. Contact Redpine Signals Sales (email@example.com) for more details and for certifications not listed here.
β: Applicable to n-Link® modules only
For additional information, please contact Sales at Redpine Signals, Inc.:
Redpine Signals, Inc. • 2107 North First Street • Suite 540 • San Jose, CA 95131
Phone: +1 408 748 3385 • Email: firstname.lastname@example.org • Website: www.redpinesignals.com
Redpine Signals, Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No Liability is assumed as a
result of their use or application.Redpine, Redpine Signals, the Redpine logo, Driving Wireless Convergence, WiSeConnect and Lite-Fi are trademarks of
Redpine Signals,Inc. All other company names, products and logos are registered trademarks of their respective companies.
© Copyright 2016 Redpine Signals, Inc. All Rights Reserved.
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
RS9113-NBZ-S0C RS9113-NBZ-S1C RS9113-NBZ-D0C RS9113-NBZ-D1C RS9113-NBZ-D1C-EVB RS9113-N0Z-
S0C RS9113-N00-S0C RS9113-N00-D0C RS9113-N00-D1C RS9113-NB0-S0C RS9113-N0Z-S1C RS9113-N0Z-
D0C RS9113-NB0-D1C RS9113-N0Z-D1C RS9113-N00-S1C RS9113-NB0-D0C RS9113-NB0-S1C