DATA SHEET
LEAD FREE CHIP RESISTORS
RC_P series
±0.5%, ±1%, ±5%
Sizes 0100/0201/0402/0603/0805/
1206/1210/1218/2010/2512
Product specification – June 07, 2017 V.0
Product specification 2
Chip Resistor Surface Mount RC_P SERIES 0100 to 2512 8
SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER
This specification describes RC Global part numbers are identified by the series, size, tolerance, packing
series chip resistors with made by type, temperature coefficient, taping reel and resistance value.
thick film process. GLOBAL PART NUMBER
APPLICATIONS RC XXXX X X X XX XXXX P
(1) (2) (3) (4) (5) (6) (7)
All general purpose application
(1) SIZE
0100/0201/0402/0603/0805/1206/1210/1218/2010/2512
FEATURES (2) TOLERANCE
Total lead free without RoHS D = ± 0.5%
exemption F = ± 1.0%
Halogen Free Epoxy J = ± 5.0% ( for jumper ordering, use code of J)
Reducing environmentally (3) PACKAGING TYPE
hazardous wastes
High component and equipment R = Paper taping reel
reliability K = Embossed taping reel
Saving of PCB space S = ESD safe reel (0100 only)
(4) TEMPERATURE COEFFICIENT OF RESISTANCE
－= Based on spec.
(5) TAPING REEL
07= 7 inch dia. Reel
13=13 inch dia. Reel
7N = 7 inch dia. Reel, ESD safe reel (0100 only)
(6) RESISTANCE VALUE
There are 2~4 digits indicated the resistance value.
Letter R/K/M is decimal point.
Example:
97R6 = 97.6Ω
9K76 = 9760Ω
1M = 1,000,000Ω
(7) DEFAULT CODE
Letter P is lead free (without RoHS exemption)
ORDERING EXAMPLE
The ordering code for a RC0402 0.0625W chip resistor value 100KΩ
with ±5% tolerance, supplied in 7-inch tape reel of 10,000 units per reel
is: RC0402JR-07100KP.
www.yageo.co m
Jun. 07, 2017 V.0
Product specification 3
Chip Resistor Surface Mount RC_P SERIES 0100 to 2512 8
MARKING
RC0100 / RC0201 / RC0402
No Marking
Fig. 1
RC0603
03 E24 series: 3 digits, 5%
First two digits for significant figure and 3rd digit for number of zeros
Fig. 2 Value = 10 KΩ
RC0805 / RC1206 / RC1210 / RC1218 / RC2010 / RC2512
00 E24/E96 series: 4 digits, 1%, 0.5%
Fig. 3 Value = 10 KΩ First three digits for significant figure and 4th digit for number of zeros
Note
For further marking information, please see special data sheet "Chip resistors marking".
CONSTRUCTION Outlines
The resistor is constructed on top of a high-grade
ceramic body. Internal metal electrodes are added For dimensions, please refer to Table 1
on each end to make the contacts to the thick
film resistive element. The composition of the
resistive element is a noble metal imbedded into a
glass and covered by a second glass to prevent
environmental influences. The resistor is laser
trimmed to the rated resistance value. The
resistor is covered with a protective epoxy
coat, finally the two external terminations (matte
tin on Nibarrier) are added, as shown in Fig.4.
Fig. 4 Chip resistor outlines
www.yageo.com
Jun. 07, 2017 V.0
Product specification 4
Chip Resistor Surface Mount RC_P SERIES 0100 to 2512 8
DIMENSION
Table 1
TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm)
RC0100 0.40± 0.02 0.20± 0.02 0.13± 0.02 0.10± 0.03 0.10± 0.03
RC0201 0.60± 0.03 0.30± 0.03 0.23± 0.03 0.10± 0.05 0.15± 0.05
RC0402 1.00± 0.05 0.50± 0.05 0.35± 0.05 0.20± 0.10 0.25± 0.10
RC0603 1.60± 0.10 0.80± 0.10 0.45± 0.10 0.25± 0.15 0.25± 0.15
RC0805 2.00± 0.10 1.25± 0.10 0.50± 0.10 0.35± 0.20 0.35± 0.20
RC1206 3.10± 0.10 1.60± 0.10 0.55± 0.10 0.45± 0.20 0.40± 0.20
RC1210 3.10± 0.10 2.60± 0.15 0.55± 0.10 0.45± 0.15 0.50± 0.20
RC1218 3.10± 0.10 4.60± 0.10 0.55± 0.10 0.45± 0.20 0.40± 0.20
RC2010 5.00± 0.10 2.50± 0.15 0.55± 0.10 0.45± 0.15 0.50± 0.20
RC2512 6.35± 0.10 3.10± 0.15 0.55± 0.10 0.60± 0.20 0.50± 0.20
ELECTRICAL CHARACTERISTICS
Table 2
CHARACTERISTICS
TYPE RESISTANCE Operating Max. Max. Dielectric Temperature Coefficient Jumper Criteria
RANGE Temperature Working Overload Withstandin of Resistance
Range Voltage Voltage g Voltage
Fig. 4 Chip resistor outlines 1Ω≤R≤10Ω: -200~+600ppm/℃ Rated Current 0.5A
RC0100 15V 30V 30V 10Ω
100Ω
–55 °C to +125 °C 1Ω≤R≤10Ω: -100~+500ppm/℃
RC0201 25V 50V 50V 10Ω
100Ω
1Ω≤R≤10Ω: ±350ppm/℃
RC0402 50 V 100 V 100 V 10Ω
100Ω
5% (E24) 10MΩ
1Ω≦R≦22MΩ 1Ω≤R≤10Ω: ±300ppm/℃
RC0603 (0201: Max.10MΩ, 10Ω
0100/1218: 75V 150 V 150 V 100Ω
Max. 1MΩ) 10MΩ
1% (E24/E96) 1Ω≤R≤10Ω: ±300ppm/℃
RC0805 1Ω≦R≦10MΩ 150 V 300 V 300 V 10Ω
(0100/1218: 100Ω
Max. 1MΩ) 10MΩ
0.5% (E24/E96) –55 °C to +155 °C Rated Current 2A
RC1206 200 V 400 V 500 V
10Ω≦R≦1MΩ Max. Current 10A
RC1210 Jumper<50mΩ Rated Current 2A
1Ω≤R≤10Ω: ±300ppm/℃ Max. Current 10A
RC1218 10Ω
100Ω
200V 500 V 500V 10MΩ
RC2010 Rated Current 2A
Max. Current 10A
RC2512 Rated Current 2A
Max. Current 10A
www.yageo.com
Jun. 07, 2017 V.0
Product specification 5
Chip Resistor Surface Mount RC_P SERIES 0100 to 2512 8
FOOTPRINT AND SOLDERING PROFILES
For recommended footprint and soldering profiles, please refer to data sheet “Chip resistors mounting”
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PACKING STYLE REEL RC0100 RC0201 RC0402 RC0603 RC0805 RC1206 RC1210 RC1218 RC2010 RC2512
DIMENSION
Paper taping reel (R) 7" (178 mm) 20,000 10,000 10,000 5,000 5,000 5,000 5,000 --- --- ---
13" (330 mm) 80,000 50000 50000 20000 20000 20000 20000 --- --- ---
ESD safe reel (S) 7" (178 mm) 40,000 --- --- --- --- --- --- --- --- ---
Embossed taping reel 7" (178 mm) --- --- --- --- --- --- 4,000 4,000 4,000
NOTE
For tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”.
FUNCTIONAL DESCRIPTION
OPERATING TEMPERATURE RANGE
RC0402 to RC2512 Range: -55℃ to +155℃ (Fig. 5-1)
RC0100 to RC0201 Range: -55℃ to +125℃ (Fig. 5-2)
POWER RATING
Each type rated power at 70 °C:
RC0100=1/32W
RC0201=1/20 W
RC0402=1/16 W
RC0603=1/10W
RC0805=1/8W Fig. 5-1 Maximum dissipation (P) in percentage of rated poweras
RC1206=1/4W a function of the operating ambient temperature (Tamb)
RC1210=1/2W
RC1218=1W
RC2010=3/4W
RC2512=1W
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by the
following formula:
V= (PxR )
Where
V = Continuous rated DC or Fig. 5-2 Maximum dissipation (P) in percentage of rated poweras
AC (rms) working voltage (V) a function of the operating ambient temperature (Tamb)
P = Rated power (W)
R = Resistance value (Ω)
www.yageo.com
Jun. 07, 2017 V.0
Product specification 6
Chip Resistor Surface Mount RC_P SERIES 0100 to 2512 8
TESTS AND REQUIREMENTS
Table 8 Test condition, procedure and requirements
TEST TEST METHOD PROCEDURE REQUIREMENTS
Temperature IEC 60115-1 4.8 At +25/–55 °C and +25/+125 °C Refer to table 2
Coefficient of
Resistance Formula:
(T.C.R.)
T.C.R= R2 R1 × 106 (ppm/°C)
R1(t2 t1)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
Life/ Endurance MIL-STD-202G Method 108A At 70± 5℃ for 1,000 hours; RCWV applied for ± (1%+0.05Ω ) for D/F tol
IEC 60115-1 4.25.1 1.5 hours on and 0.5 hour off, still air required ± (3%+0.05Ω ) for J tol
<100mR for jumper
High MIL-STD-202G Method 108A 1,000 hours at maximum operating temperature ± (1%+0.05Ω ) for D/F tol
Temperature IEC 60115-1 4.25.3 depending on specification, unpowered. ± (2%+0.05Ω ) for J tol
Exposure <50mR for jumper
Moisture MIL-STD-202G Method 106F Each temperature / humidity cycle is defined at ± (0.5%+0.05Ω ) for D/F tol
Resistance IEC 60115-1 4.24.2 8 hours (method 106F), 3 cycles / 24 hours for ± (2%+0.05Ω ) for J tol
10d with 25 °C / 65 °C 95% R.H, without steps <100mR for jumper
7a & 7b, unpowered
Parts mounted on test-boards, without
condensation on parts
Humidity IEC 60115-1 4.37 Steady state for 1000 hours at 40 °C / 95% R.H. ± (1%+0.05Ω ) for D/F tol
RCWV applied for 1.5 hours on and ± (2%+0.05Ω ) for J tol
0.5 hour off <100mR for jumper
Thermal MIL-STD-202G Method 107G -55/+125℃ ± (0.5%+0.05Ω ) for D/F tol
Shock Note Number of cycles required is 300 Devices ± (1%+0.05Ω ) for J tol
mounted <50mR for jumper
Maximum transfer time is 20 seconds Dwell time
is 15 minutes. Air - Air
Short Time IEC 60115-1 4.13 2.5 times RCWV or maximum overload voltage ± (1%+0.05Ω ) for D/F tol
Overload which is less for 5 seconds at room temperature ± (2%+0.05Ω ) for J tol
<50mR for jumper
No visible damage
Board Flex/ IEC 60115-1 4.33 Device mounted or as described only 1 board ± (1%+0.05Ω ) for D/F/J Tol
Bending bending required <50mR for jumper
bending time: 60± 5 seconds No visible damage
0100/0201/0402:5mm;
0603/0805:3mm;
1206 and above:2mm
www.yageo.com
Jun. 07, 2017 V.0
Product specification 7
Chip Resistor Surface Mount RC_P SERIES 0100 to 2512 8
TEST TEST METHOD PROCEDURE REQUIREMENTS
Solderability IPC/JEDECJ-STD-002B test B Electrical Test not required Magnification 50X W ell tinned
- Wetting IEC 60068-2-58 SMD conditions: (>95% covered)
1st step: method B, aging 4 hours at 155 °C No visible damage
dry heat
2nd step: leadfree solder bath at 245± 3 °C
Dipping time: 3± 0.5 seconds
-Leaching IPC/JEDECJ-STD-002B test D Leadfree solder ,260°C, 30 seconds immersion No visible damage
IEC 60068-2-58 time
-Resistance to MIL-STD-202F Method 210F Condition B, no pre-heat of samples ± (0.5%+0.05Ω ) for D/F tol
Soldering Heat IEC 60068-2-58 Leadfree solder, 260 °C ± 5℃, 10 ± 1 seconds ± (1%+0.05Ω ) for J tol
immersion time <50mR for jumper
Procedure 2 for SMD: devices fluxed and No visible damage
cleaned with isopropanol
www.yageo.com
Jun. 07, 2017 V.0
Product specification 8
Chip Resistor Surface Mount RC_P SERIES 0100 to 2512 8
REVISION HISTORY
REVISION DATE CHANGE NOTIFICATION DESCRIPTION
Version 0TYPEAug. 22, 2014 - POWER TOL-ERFiArsNt isCsuEe of RthEisSsISpTecAifNicaCtiEonRANGE TEMPERATURE COEFFICIENT
OF RESISTANCE
0603 1/10W, 1/5W, 3/10W, 2/5W, 1/2W 5 mΩ≦ R < 100 mΩ
0805 1/8W, 1/4W, 1/3W, 1/2W 4 mΩ ≦ R < 100 mΩ
1206 1/4W, 1/2W 3 mΩ ≦ R < 100 mΩ
1/2W, 1W
The resistors are constructed
using outstanding TCR level
material, which makes Yageo PF
resistors excellent for current
sensing application in battery
charger circuit & DC-DC
converter.
The composition of the resistive ± 1%
PF 2010material is adjusted to give the ± 2% 5 mΩ ≦ R < 100 mΩ ±75 ppm/°C
approximate required resistance ± 5%
and is covered with a protective
coating, which printed with the
resistance value.
Finally, the three external
terminations (Ni / matte Tin) are
added, as shown in Fig. 4.
2512 1W, 2W 1 mΩ ≦ R < 100 mΩ
3W 1 mΩ ≦ R ≦ 50 mΩ
4527 2W, 3W, 5W 6 mΩ ≦ R < 1Ω
NOTE: 1. PLEASE CONTACT WITH SALES OFFICES, DISTRIBUTORS AND REPRESENTATIVES IN YOUR REGION BEFORE ORDERING
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Jun. 07, 2017 V.0
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Yageo:
RC0201JR-070RP RC0402FR-0733RP RC0603JR-07100RP RC0603FR-073K3P RC0402FR-071K5P RC0402FR-
0739R2P RC0603FR-074K7P RC0402FR-0710RP RC0603JR-0710RP RC0603FR-0733RP RC0805FR-0710KP
RC0402FR-0710KP RC0603FR-0710KP RC0402FR-074K75P RC0402JR-070RP RC0402FR-07240RP RC0402FR-
072K2P RC0402FR-0722R1P RC0805FR-0710RP RC0402FR-07750RP RC0402FR-07470RP RC0201JR-074K7P
RC1206FR-07100RP RC0603FR-074K99P RC0402FR-07200RP RC0402FR-074K99P RC0201FR-0710KP
RC0402JR-0710RP RC0402JR-0722RP RC0402FR-07332RP RC0603JR-074K7P RC0402FR-0751R1P
RC0603JR-0710KP RC0603FR-07150RP RC0402FR-073K01P RC0805JR-0710RP RC0603FR-072KP RC0805FR-
07100RP RC0402JR-0710KP RC0402JR-0733RP RC0402FR-071K21P RC0402FR-077K5P RC0402FR-0722RP
RC0603FR-07470RP RC0603FR-07330RP RC0402FR-07100RP RC0603FR-071KP RC0402FR-074K7P
RC0603FR-07100RP RC0402FR-07150RP RC0603JR-070RP RC0805JR-070RP RC0402FR-0733R2P RC0402FR-
0749R9P RC0402FR-071KP RC0603FR-071RP RC0402FR-0724R9P RC0402JR-071KP RC0402FR-0775RP
RC0603JR-07470RP RC0603FR-072K2P RC0603JR-072K2P RC0603FR-0775RP RC0603FR-0710RP RC0201JR-
0733RP RC0402JR-0751RP RC0603JR-07220RP RC0402FR-0742R2P RC0603JR-07330RP RC0402FR-073K3P
RC0603JR-073K3P RC0201JR-0710RP RC0402FR-07510RP RC0603JR-071KP RC0402JR-074K7P RC0402JR-
07100RP RC0805FR-072KP RC0603FR-0749R9P RC0603FR-071K5P RC0402FR-072KP RC1206FR-0710KP
RC1206JR-071KP RC1206FR-071KP RC1206JR-0710RP RC0805JR-071KP RC0805FR-074K7P RC0805FR-
0749R9P RC0805JR-07100RP RC0805JR-074K7P RC1206JR-0710KP RC0603FR-074K75P RC0805FR-071KP
RC0805FR-076R04P RC0201FR-0710RP RC1206FR-0710RP RC0805JR-0710KP RC1206JR-074K7P RC0402JR-
0715RP RC0805JR-07470RP RC0805JR-072K2P
电子工程世界
