Amphenol ® Miniature Cylindrical
Connectors
12-070-15
Meets MIL-C-26482, Series 1
Specifications
Amphenol
Table of Contents Page No. Proprietary/MIL-C-26482 Series 1 connectors
Introduction, Amphenol® Miniature Cylindrical covered in this catalog are widely used in gen-
General Information, Design Flexibility . . . . . . . . . . . . . . . . . . .1, 2 eral duty and environmental applications,
Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . .3 both industrial and military.
Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5 Markets that use this family of connectors include:
Insert availability Breakaway Twist Pull. . . . . . . . . . . . . . . . . . . . . . .6 • Instrumentation
Alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 • Monitoring Equipment
Insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11
PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 Bayonet Coupling, • Machine Tool, Factory Automation
Solder Contacts • Communications
General Information, Specifications, Service Class . . . . . . . . . . . 12, 13 • Geophysical
PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . . . . . . 14 • Industrial Controls and Robotics
PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . . . . . . 15 • Oil and Petrochemical Industries
PT02 (MS3112) SP02 box mounting receptacle . . . . . . . . . . . . . . 16 • Rail/Mass Transit
PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . . . . . 17 • Military/Aerospace
PT07 (MS3114) SP07 jam nut receptacle . . . . . . . . . . . . . . . . . . 18
PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . . . . 19
PT Connectors with Printed Circuit Board Contacts - If more information is needed concerning the con-
box mount receptacle, jam nut receptacle. . . . . . . . . . . . . . . . . . 20 nectors covered in this publication, or if there are
PTB, SPB thru bulkhead receptacle . . . . . . . . . . . . . . . . . . . . . 21 special application needs, please contact:
General Information, Specifications - PT hermetic . . . . . . . . . . . . . 22
PTIH (MS3113H) hermetic solder mounting receptacle . . . . . . . . . . . 23 Amphenol Corporation
PT02H hermetic box mounting receptacle . . . . . . . . . . . . . . . . . 24 Amphenol Aerospace
PT07H (MS3114H) hermetic jam nut receptacle . . . . . . . . . . . . . . 25 Amphenol Industrial Operations
PT Breakaway twist pull plug . . . . . . . . . . . . . . . . . . . . . . . . 26 40-60 Delaware Avenue
PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . . 27 Sidney, New York 13838-1395
PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-C-26482, Series 1 Bayonet Coupling, Telephone: 607-563-5011
Crimp Contacts Fax: 607-563-5351
General Information, Specifications, Service Class . . . . . . . . . . . 28, 29
PT00SE (MS3120), SP00SE wall mounting receptacle . . . . . . . . . . . 30 Please go to the Amphenol websites to view,
MF00SE (MS3128) wall mounting receptacle . . . . . . . . . . . . . . . . 31 download and save this catalog and most all of
PT01SE (MS3121) SP01SE cable connecting receptacle . . . . . . . . . 32 Amphenol interconnection product literature.
PT02SE (MS3122) SP02SE box mounting receptacle . . . . . . . . . . . 33 www.amphenol-industrial.com
MF02SE (MS3127) box mounting receptacle . . . . . . . . . . . . . . . . 34
PT06SE (MS3126), SP06SE straight plug . . . . . . . . . . . . . . . . . 35 www.amphenol-aerospace.com
PT07SE (MS3124) SP07SE jam nut receptacle . . . . . . . . . . . . . . 36
PT08SE, SP08SE 90 degree plug . . . . . . . . . . . . . . . . . . . . . 37
PT-SE Breakway twist pull plug . . . . . . . . . . . . . . . . . . . . . . . 38 Some miniature connector styles
PT-SE, SP-SE, MS/PT-SE how to order . . . . . . . . . . . . . . . . . . 39 are available in RoHS Compliant Amphenol
PT-CE, SP-CE Bayonet Coupling, Crimp Contacts RoHS
General Information, Specifications, Service Class . . . . . . . . . . . 40, 41 versions. Please contact Amphenol
PT00CE, SP00CE wall mounting receptacle . . . . . . . . . . . . . . . . 42 Industrial Operations for more
PT01CE, cable connecting receptacle . . . . . . . . . . . . . . . . . . . 43 information. EU / 2002 / 95 / EC
PT02CE, SP02CE box mounting receptacle . . . . . . . . . . . . . . . . 44
PT06CE, SP06CE straight plug . . . . . . . . . . . . . . . . . . . . . . . 45
PT07CE, SP07CE jam nut receptacle. . . . . . . . . . . . . . . . . . . . 46 Amphenol operates Quality Systems that are cer-
PT08CE, SP08CE 90 degree plug . . . . . . . . . . . . . . . . . . . . . 47
PT-CE Breakawat twist pull plug . . . . . . . . . . . . . . . . . . . . . . 48 tified to ISO9001: 2000 by third party registrars.
PT-CE, SP-CE how to order. . . . . . . . . . . . . . . . . . . . . . . . . 49
PC Threaded Coupling, Solder Contacts
General Information, Specifications, Service Class . . . . . . . . . . . 50, 51
PC00 wall mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . 52 NOTE:
PC01 cable connecting receptacle . . . . . . . . . . . . . . . . . . . . . 53 The connector products in this brochure were formerly
PC02 box mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . 54 known as Bendix® products. These products are now
PC06 straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 manufactured and sold under the Amphenol® brand
PC07 jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . 56 name. The name “Amphenol” will replace the name
General Information, Specifications - PC hermetic . . . . . . . . . . . . . 57 “Bendix” on products and literature in the future.
PCIH hermetic solder mounting receptacle . . . . . . . . . . . . . . . . . 58 NOTE:
PC02H hermetic box mounting receptacle . . . . . . . . . . . . . . . . . 59 The Miniature MIL-C-26482, Series 2 connectors PTS-
PC07H hermetic jam nut receptacle. . . . . . . . . . . . . . . . . . . . . 60 DR and MS/PTS-DR (formerly in this catalog) are no
PC how to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 longer supplied with these designations. Amphenol now
PC-SE, PC-CE Threaded Coupling, Crimp Contacts supplies the Amphenol®/Matrix® MIL-C-26482, Series
General Information, Specifications, Service Class . . . . . . . . . . . . . 62
PC-SE, PC-CE how to order . . . . . . . . . . . . . . . . . . . . . . . . 63 2. (Military numbers include MS3470 - MS3472,
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-68 MS3474, - MS3476).
Application tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Please refer to page 78 for a brief description of the
Contacts, Power and Thermocouple Crimp. . . . . . . . . . . . . . . . . . . . 70 Amphenol®/Matrix® MIL-C-26482, Series 2 bayonet
Contacts, Shielded Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . 71-76 coupling connectors with crimp, rear insertable and rear
Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 releasable contacts, and ask for catalog 12-071 for
Other Amphenol Miniature Cylindrical Connectors . . . . . . . . . . . . . . 78, 79 detailed information on this series.
Amphenol Sales Office and Authorized Distributor Listing . . . . . . . . . . . . 80
Amphenol ® Miniature Cylindrical Connectors
Proprietary/MIL-C-26482, Series 1
Amphenol® Miniature Cylindrical connectors offer twice the number of contacts in just half the size of a Standard connector. These
miniature connectors, are available in several series, each with varying design characteristics and customer options to meet cost con-
siderations and provide maximum design flexibility. There are two styles within the family that are MS approved and qualified to MIL-
C-26482, Series 1, and in addition there are several proprietary styles.
Common features of all styles:
• All are for general duty applications and environmental sealing is achieved with the grommet and clamp design.
• Operating temperature is from –55°C to +125°; Operating voltage to 1000 VAC (RMS) at sea level.
• Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide an
indefinite shelf life.
• All have resilient inserts which provide high dielectric strength and moisture barrier.
• A variety of shell finishes (including non-cadmium) and a variety of backend accessories are available within the styles.
Bayonet Coupling with Solder Contact Termination
PT, MS/PT (solder) Options
• MS and proprietary versions • 7 shell styles with 60 insert patterns
• Factory installed solder contacts • Hermetic seal (glass fusion) recepta-
• 3 point bayonet coupling and 5 key/keyway mating. cle styles available
• Intermateable with all miniature series connectors except threaded • Pressurized thru bulkhead recepta-
PC series. cle style available
PT Solder • MS/PT meets MIL-C-26482 Series 1, service classes E, F and P. • Breakaway quick disconnect styles
jam nut receptacle and • MS/PT is UL recognized. • EMI filter protection styles
mated straight plug SP (solder) • Pre-installed coax solder contacts
• SP Series is a modification of the PT with same features except a are available
wider flange for back panel mounting • Printed circuit board contacts are
available
Bayonet Coupling with Crimp Contact Termination
PT-SE, MS/PT-SE (crimp) Options
• MS and proprietary versions • 6 shell styles with 47 insert patterns
PT Solder • Crimp rear insertable/front release contact termination. (closed entry • Breakaway quick disconnect style
wall mount receptacle socket insert prevents probe damage). available
• 3 point bayonet coupling and 5 key/keyway mating. • Coax and thermocouple contacts are
• Intermateable with all miniature series connectors except threaded available
PC series.
• MS/PT-SE meets MIL-C-26482 Series 1, service classes E, F, P.
SP-SE (crimp)
• Modification of the PT-SE with wider flange for back panel mounting
PT-CE, SP-CE (crimp)
• Incorporates a special one-piece insert and grommet assembly
PT-SE Crimp
wall mount receptacle Threaded Coupling with Solder Contact Termination
and mated straight plug PC (solder) Proprietary Options
• Double stub threaded coupling and single hole polarization. • 5 shell styles with 60 insert patterns
• Factory installed solder contacts • Hermetic receptacles available
• Pressurized thru bulkhead recepta-
cle style available
• Pre-installed coax solder contacts
are available.
Threaded Coupling with Crimp Contact Termination
Two threaded PC styles are offered in some shell sizes. Both have Options
crimp front release and front removable contacts, but they have differ- • 5 shell styles (consult Amphenol for
ent retention systems. availability of shell sizes and insert
PC-SE (crimp) Proprietary - with spring tower retention system patterns)
PC Threaded Crimp • Spring tower retention system
straight plug and wall PC-CE (crimp) Proprietary - with nylon wafer dielectric system
mount receptacle 1
Amphenol ® Miniature Cylindrical
design flexibility
The large family of miniature proprietary and MS style connectors provides for
many optional features and designs. In addition to the choices of bayonet or
threaded shells, solder or crimp termination within the style variations, there are
additional options that are shown here.
Hermetics
Hermetically sealed receptacles have fused compression glass sealed
inserts which provide envionrmental moisture sealing. There are three
hermetic styles within the PT bayonet series and three hermetic styles
within the PC threaded series.
Coaxial Contacts
Amphenol Miniature connectors can incorporate shielded coax
contacts. Size 8 and 12 crimp coax contacts are available in PT-SE, 26482 Connector with Hermetic 26482 Connector with PC Tail
SP-SE, MS/PT-SE. Factory installed size 8 and 12 solder type coax Seal Insert and Coax Contacts Contacts
contacts are available in PT, SP,MS/PT connectors. See coax contact
information pages at the end of this catalog.
Printed Circuit Board Tail Contacts
PT bayonet connectors in box mounting receptacle and jam nut receptacle styles are avail-
able with printed circuit board contacts. Standard PCB tails for MIL-C-26482 connectors
have gold plating, .0050 inches over nickel. See page 20 and call Amphenol for further infor-
mation.
Flex Circuitry
Flex termination assemblies for attaching cylindrical connectors to printed circuit boards are
available through the Amphenol division ACT, Advanced Circuit Technology. Flex can be
used with miniature 26482 connectors and it can be designed to meet specific length, current 26482 Connector with Flex
carrying capacity and to fit the precise geometric shape of the connector to board package.
Flex circuity plugs into a printed circuit board and creates a self-locking terminal pad which
eliminates the need for an additional interconnect to the PCB.
Breakaway, Twist Pull Miniatures
Quick disconnect “breakaway” styles are shown in this catalogs. These are available in PT
solder style plugs (page 26), PT-SE crimp style plugs (page 38) or PT-CE crimp style plugs
(page 48). Quick disconnect of the connector plug from the receptacle is accomplished with
axial pull on the lanyard. This instant decoupling and damage free separation is ideal for
weapons release and blind or difficult accessibility situations. Separation forces vary per
connector series. The plug and receptacle need to be fully mated before disengagement by
the lanyard pull. Breakaway Twist Pull 26482
Filter Protection
Amphenol offers the FPT Series which combines the miniature PT
series with an EMI filter. Designed to provide EMI protection for
sensitive circuits, each circuit is individually filtered within the con-
nector, eliminating the need for costly and bulky exterior network
filters. Filter contacts are available in MF, HF, VHF, and UHF
ranges and are intermateable and intermountable with MIL-C-
26482 connectors. For further information see catalog 12-120,
Amphenol EMI Filter Transient Protection Connectors. (online at 26482 Connector with EMI
www.amphenol-aerospace.com). Filter Protection
Overmolded Cable 26482 Connector with Overmolded
Overmold seals and cables can be designed for almost any industrial application. A variety Cable
of materials are available: neoprene, hypalon and others; and a variety of lengths can be
designed to meet customer specifications. Overmold seals to the rear of the connector and
to the cable jacket providing moisture sealing.
2
Amphenol ® Miniature Cylindrical
connector selection guide
The accompanying chart is provided to assist the user in selecting
the appropriate type of miniature connector to meet the application
requirements. Further information can be found in specific sections
of this catalog.
Solder Crimp
MS/
CHARACTERISTICS PT MS/PT SP PC PT-SE PT-SE SP-SE PC-SE PT-CE SP-CE PC-CE
Intermateable† o o o X o o o X o o X
Contacts Solder • • • •
Crimp RI/FR • • • • • • •
Contact Retention Non-Removable • • • •
System Removable • • • • • • •
Coupling Bayonet • • • • • • • •
Threaded • • •
Standard Finishes†† Olive Drab Cadmium (003) • • • • •
Anodic Coated (005) • • •
Bright Cadmium (001) • • •
Temperature Range Resilient Dielectric (–55°C to +125°C) • • • • • • • • • • •
Wide Mounting Flange • • •
Hermetic Seal • • • •
SHELL STYLE AVAILABILITY
Wall Mounting Receptacle “00” • • • • • **• • • • •
Cable Connecting Receptacle “01” *** • • • • • • • •
Box Mounting Receptacle “02” *• • • *• • **• • • • •
Straight Plug “06” • • • • • • • • • • •
Jam Nut Receptacle “07” *• *• • *• • • • • • • •
Thru-bulkhead Receptacle “TB” • •
Solder Mount Receptacle “I” *• *• *•
90° Plug “08” • • • • • • • •
RI/FR = Rear Insertion/Front Releasable
† o intermates with o
X intermates with X
†† Optional finishes available. See “how to order” sections.
* Available in hermetic version
** Dual mounting holes
*** This connector style is sometimes referred to as a cable connecting “plug.”
It does, however, mate with either a straight or 90 degree plug.
Amphenol®/Matrix® MIL-C-26482, Series 2 bayonet coupling connectors with rear insertable and rear releaseable
contacts are covered in another catalog - See pageXX for a brief description and see complete details in catalog 12-071
which is online at www.amphenol-aerospace.com.
3
Amphenol ® Miniature Cylindrical
insert availability
Solder Termination Crimp Termination Contact Size
Hermetic MS/PT-SE Coax
PT PT-SE PT-CE
Insert MS-PT SP-SE SP-CE Total Service
Arrangement MS/PT PT SP PC PC PC-SE PC-CE Contacts 20 16 12 12 8 Rating
6-1 X X X X* 1 1 I
8-2 X X X X X X 2 2 I
8-3 X X X X X X 3 3 I
8-4 X X X X X X 4 4 I
8-33 X X X X X 3 3 I
8-98 X X X 3 3 I
10-2 X X X 2 2 I
10-5 X X X X* 5 5 I
10-6 X X X X X X X 6 6 I
10-70 X X X 1 1 Coax
10-98 X X X X X* X 6 6 I
12-3 X X X X X X X 3 3 II
12-4 X X X X* 4 4 I
12-8 X X X X X* X X 8 8 I
12-10 X X X X X X X 10 10 I
12-14 X X X 14 14 I
12-98 X X X 10 10 I
14-2 X X X 2 2 II
14-4 S S S X 4 4 I
14-5 X X X X X X X 5 5 II
14-8 X X X 8 6 2 I
14-12 X X X X X X X 12 8 4 I
14-15 X X X X X X X 15 14 1 I
14-18 X X X X X* X X 18 18 I
14-19 X X X X X X X 19 19 I
14-22 X* 5 1 4 I
14-71 P X X (02CE) 4 3 1 I
14-91 HV S X X X* 3 3 **
14-AA X X X X 4 4 I
16-8 X X X X X X X 8 8 II
16-23 X X X X X X 23 22 1 I
16-26 X X X X X X X 26 26 I
16-70 X X X 15 14 1 N/A
16-76††† X* 14 8 1 5 ***
16-99 X X X X X 23 21 2 I
18-5 X X X X* 5 5 II
18-8 8 8 I
18-11 X X X X X X X 11 11 II
18-30 X X X X X* X X 30 29 1 I
*Not available in MS version P designates Pin insert only.
**Flashover voltage 5,000 VAC (RMS) †Size 12 contacts for #10 wire
***1500 VAC (RMS) ††Not presently tooled
Sdesignates Socket insert only. †††Contacts must be ordered separately
4
Amphenol ® Miniature Cylindrical INSERT AVAILABILITY
insert availability, cont.
Solder Termination Crimp Termination Contact Size
Hermetic MS/PT-SE Coax
PT PT-SE PT-CE
Insert MS-PT SP-SE SP-CE Total Service
Arrangement MS/PT PT SP PC PC PC-SE PC-CE Contacts 20 16 12 12 8 Rating
18-32 X X X X X X X 32 32 I
18-71 X* 9 8 1 Coax, II
18-72 X X X 14 10 4 N/A
18-75 X X X 4 4 Coax
18-76 4 3 1 II
18-80 X X X X 8 6 2 Coax, I
18-91 HV X* X 6 6 **
20-16 X X X X X X X 16 16 II
20-24 X X X X X 24 24 I
20-25 X X X 25 25 I
20-26 X X X 26 20 6 I
20-27 X X X X X 27 27 I
20-39 X X X X X X X 39 37 2 I
20-41 X X X X X X X 41 41 I
20-70 14 10 4 Coax
20-90 HV X X X 7 7 Hi-Voltage
22-7 X X X X* 7 7 Coax
22-21 X X X X X X X 21 21 II
22-25 X* 25 25 I
22-32 X X X X X P 32 32 I
22-34 X X X X 34 34 I
22-36 X X X X 36 36 I
22-41 X X X X X X X 41 27 14 I
22-55 X X X X X X X 55 55 I
22-70 X X X 19 13 6 I, Coax
22-71 9 2 7 I, Coax
22-72 X X X 19 12 4 3 N/A
22-78††† X* 7 7 Coax
22-96 X* 7 7† II
24-31 X X X X 31 31 I
24-51 X* 51 47 4 I
24-61 X X X X X X X 61 61 I
24-71 X X X 49 45 2 2 N/A
24-79 6 1 5 Coax
*Not available in MS version †Size 12 contacts for #10 wire
**Flashover voltage 5,000 VAC (RMS) ††Not presently tooled
***1500 VAC (RMS) †††Contacts must be ordered separately
5
Amphenol ® Miniature Breakaway Twist Pull
insert availability
Insert Availability - Breakway Twist Pull For further information regarding any additional
Crimp Solder insert patterns available in Breakaway Miniature
Termination Termination Contact Size connectors, please contact Amphenol Aerospace.
Insert Total Service For availability of shielded coax contacts within
Arrangement PT-CE PT-SE PT Contacts 20 16 12 Rating Breakaway Miniature connectors contact Amphe-
8-2 X X 2 2 I nol.The Breakaway style pages are: PT (solder)
8-3 X X 3 3 I breakaway plug is on page 26, the PT-SE (crimp)
8-4 X X 4 4 I breakaway plug is on page 38, and the PT-CE
10-2 X 2 2 I (crimp) breakaway plug is on page 48.
10-6 X X X 6 6 I
10-98 X X 6 6 I
10-99 X X 7 7 I
12-3 X X X 3 3 II
12-4 X 4 4 I
12-8 X X X 8 8 I
12-10 X X X 10 10 I
12-98 X 10 10 I
14-2 X 2 2 II
14-5 X X X 5 5 II
14-8 X 8 6 2 I
14-12 X X X 12 8 4 I
14-15 X X X 15 14 1 I
14-16 X 4 2 2 II
14-18 X X X 18 18 I
14-19 X X X 19 19 I
14-91 X X 3 3* H.V.
16-6 X 6 6 I
16-8 X X X 8 8 II
16-23 X X X 23 22 1 I
16-26 X X X 26 26 I
16-99 X X 23 21 2 I
18-5 X X 5 5 II
18-11 X X X 11 11 II
18-28 X X 28 26 2 I
18-30 X X X 30 29 1 I
18-32 X X X 32 32 I
18-91 X X 6 6* H.V.
20-8 X 8 8 I
20-16 X X X 16 16 II
20-24 X X 24 24 I
20-25 X 25 25 I
20-27 X X 27 27 I
20-39 X X X 39 37 2 I
20-41 X X X 41 41 I
22-8 X 8 8 II
22-21 X X X 21 21 II
22-25 X 25 25 I
22-32 X X X 32 32 I
22-34 X X 34 34 I
22-36 X X 36 36 I
22-41 X X 41 27 14 I
22-55 X X X 55 55 I
22-96 X 7 7† II
22-97 X 16 16 II
22-99 X 11 11 II
24-31 X 31 31 I
24-61 X X X 61 61 I
* 5KV Voltage Rating 6
† Size 12 contact for #10 wire.
Amphenol ® Miniature Cylindrical
alternate positioning
Alternate Positioning
To avoid cross-plugging problems in applications requiring
the use of more than one miniature cylindrical connector of A B
A B
the same size and arrangement, alternate insert rotations B A
B A
are available as indicated in the accompanying chart.
As shown in the diagram at right, the front face of the pin Position W Position X Position Y Position Z
insert is rotated within the shell in a clockwise direction from
the normal shell key. The socket insert would be rotated Views looking into front face of pin insert or rear of socket insert.
counterclockwise the same number of degrees in respect to
the normal shell key.
Insert Rotation Insert Rotation
Shell Insert Degrees Shell Insert Degrees
Size Arrangement W X Y Z Size Arrangement W X Y Z
6 6-1 – – – – 18 18-11* 62 119 241 340
8 8-2* 58 122 – – 18 18-30* 180 193 285 350
8 8-3 60 210 – – 18 18-32* 85 138 222 265
8 8-4* 45 97 184 – 18 18-71 18 108 127 215
8 8-33* 90 – – – 18 18-72 53 102 213 293
8 8-98 – – – – 18 18-75 45 – – –
10 10-2 45 90 315 – 18 18-76 – – – –
10 10-5* 45 151 180 270 18 18-80 45 90 135 160
10 10-6* 90 – – – 18 18-91HV 90 180 240 270
10 10-70 – – – – 20 20-16* 238 318 333 347
10 10-98* 90 180 240 270 20 20-24 70 145 215 290
12 12-3* – – 180 – 20 20-25 72 144 216 288
12 12-4* 38 – – – 20 20-26 13 107 210 322
12 12-8 90 112 203 292 20 20-27 72 144 216 288
12 12-10* 60 155 270 295 20 20-39* 63 144 252 333
12 12-14 – – – – 20 20-41* 45 126 225 –
12 12-98* 61 135 189 340 20 20-70 63 135 222 335
14 14-2 58 122 – – 20 20-90 45 135 225 315
14 14-4* 45 – – – 22 22-7 19 41 – –
14 14-5* 40 92 184 273 22 22-21* 16 135 175 349
14 14-8 48 162 189 312 22 22-25 60 125 211 336
14 14-12* 43 90 – – 22 22-32 72 145 215 288
14 14-15* 17 110 155 234 22 22-34 62 142 218 298
14 14-18* 15 90 180 270 22 22-36 72 144 216 288
14 14-19* 30 165 315 – 22 22-41 39 135 264 –
14 14-22 45 – – – 22 22-55* 30 142 226 314
14 14-71 – – – – 22 22-70 30 82 218 312
14 14-91HV – 60 – – 22 22-71 33 191 236 270
14 14-AA* 45 – – – 22 22-72 42 200 277 339
16 16-8* 54 152 180 331 22 22-78 19 41 – –
16 16-23 158 270 – – 22 22-96* 19 41 – –
16 16-26* 60 – 275 338 24 24-31 90 225 255 –
16 16-70 41 122 216 286 24 24-51 22 171 313 –
16 16-76 – – – – 24 24-61* 90 180 270 324
16 16-99* 66 156 223 340 24 24-71 39 131 205 281
18 18-5 55 97 263 315 24 24-79 – – – –
18 18-8 180 – – – * Available in Hermetic Class
7
Amphenol ® Miniature Cylindrical
insert arrangements
front face of pin inserts illustrated
C A D A C B A
B A C C A
B A B B B
Insert Arrangement 6-1 8-2 8-3 8-4 8-33 8-98 10-2
Service Rating I I I I I I I
Number of Contacts 1 2 3 4 3 3 2
Contact Size 20 20 20 20 20 20 16
F A A A G A
E A
B E F B C A F B
D B E D B H
C E C
D C D C C
B D
Insert Arrangement 10-5 10-6 10-70 10-98 12-3 12-4 12-8
Service Rating I I Coax I II I I
Number of Contacts 5 6 1 6 3 4 8
Contact Size 20 20 8 Coax 20 16 16 20
A
H A B B C A H B
A F H H A B E B
G K J C D E L G C D A
M G C
J K K J C B D C
R F D F D
F E D N P E
E
Insert Arrangement 12-10 12-14 12-98 14-2 14-4 14-5 14-8
Service Rating I I I II I II I
Number of Contacts 10 14 10 2 4 5 6 2
Contact Size 20 20 20 12 12 16 20 12
H A L A L A M A A A
K B L B D A
G J B M K M N B N P B
J C U K U V C B
M K R N J T P C R E
S R C
H P D H D J T D D
F L C S C B
G E H E
E D F G F E G F C
Insert Arrangement 14-12 14-15 14-18 14-19 14-22 14-71 14-91HV
Service Rating I I I I I I Flashover
5,000 VAC (RMS)
Number of Contacts 8 4 14 1 18 19 1 4 3 1 3
Contact Size 20 16 20 16 20 20 20 12 16 8 Coax 20
8 For contact legend see page 61.
Amphenol ® Miniature Cylindrical
insert arrangements
front face of pin inserts illustrated
A N P A R A
A P S T B A
M R B C P H
G B Y S N a U G B
D L Z C b
H X T M D N J
F C D Z c V F C
B K L E R
W U Y W M K
C J V E K X F D
E D F G E L
H G J H
Insert Arrangement 14-AA 16-8 16-23 16-26 16-70
Service Rating I II I I N/A
Number of Contacts 4 8 22 1 26 14 1
Contact Size 12 16 20 16 20 20 12 Coax
A J A
A R A
K B P B A G B
J N L C N S T C H B
P Y Z U E B H K
M D
H M D X V E L
L W D C F C G C
G E K F
F J H G F D
E D E
Insert Arrangement 16-76 16-99 18-5 18-8 18-11
Service Rating Flashover I II I II
1.500 VAC (RMS)
Number of Contacts 8 1 5 21 2 5 8 11
Contact Size 20 12* 2 Coax* 20 16 12 12 16
*Contact Positions Optional
S A B S T A A
R C R U B H B
d T e V K L A
P c e U D P f C J
d W J B
N b V j D G C
E N g P M
a g f c X
M W F M h E C
X b Y H
L Z Y G L F N
a Z F D G D
K H K G F E
J J H E
Insert Arrangement 18-30 18-32 18-71 18-72
Service Rating I I II, Coax N/A
Number of Contacts 29 1 32 8 1 10 4
Contact Size 20 16 20 16 8 Coax 20 12 Coax
A A A
D B H B
D A F
C G C E B
C B
F D
E D C
Insert Arrangement 18-75 18-76 18-80 18-91 HV
Service Rating Coax II I, Coax Flashover
5,000 VAC (RMS)
Number of Contacts 4 3 1 6 2 6
Contact Size 8 Coax 12 Coax 8 Coax 20 8 Coax 20
9
Amphenol ® Miniature Cylindrical
insert arrangements
front face of pin inserts illustrated
L A R A U A
L M A B V
K M B W N N P X S C D S T B C
K X B R D
S N Y a W
a Y M W T E
J C V P P c b E
R P J C b Z
N F
H U Z R L V a U F Z X
H D D M G
T S G L H
G E G E K K Y J
F F J H
Insert Arrangement 20-16 20-24 20-25 20-26
Service Rating II I I I
Number of Contacts 16 24 25 20 6
Contact Size 16 20 20 20 12
R A B V W A W A B K A
P U X B X C
j V j D J L B
a S C T Y C Y
N i k Z U i k Z E
Z b T D S D s m P M
h r m a T h t a
M d c E F
Y U E R S r n
L g q n b g b G
P p F R q p
F f c f H H C
K X V N G c
W e d P e d J G N D
G M H N K F E
J H L K J M L
Insert Arrangement 20-27 20-39 20-41 20-70
Service Rating I I I Coax
Number of Contacts 27 37 2 41 10 4
Contact Size 20 20 16 20 20 8 Coax
A N A P A
N R B
F B M P B
A M Y S C
W R Z
G L C
G B X X T
L b a D
E C V S
K D W U
F C D K V E
E D J U T E
J F
H F G
G H
Insert Arrangement 20-90 22-7 22-21 22-25
Service Rating Hi-Voltage Coax II I
Number of Contacts 7 7 21 25
Contact Size 20 8 Coax 16 16
N A T A T A Y A B
B S Z
P S U B X k a C
M b R B U C R f V
d V C W j m D
a h c S R e g V b
L D P e m h W s n E
C c k W i t c
Z g j d T P l f n D U
E N r p F
K D N b d l j X
Y f e j g X E T h q d G
U h F M k g e
E M c Y S H
J X V a Y F f
Z G L b a Z R J
W L G P
H F H K K
G K J J H N M L
Insert Arrangement 22-32 22-34 22-36 22-41
Service Rating I I I I
Number of Contacts 32 34 36 27 14
Contact Size 20 20 20 20 16
10
Amphenol ® Miniature Cylindrical
insert arrangements
front face of pin inserts illustrated
T U A B A
V A H J A
S n C M B
m p W K B
k AA X Y F B
R BB q D S L
z r L U N C G J C
GG CC Z V
P j HH s E V U T
y FF DD a K T P D R M
N i EE t F
x u b J S R E H P N D
h w v c F
M g d G G E
L f e H H F E C
K J G
D
Insert Arrangement 22-55 22-70 22-71 22-72
Service Rating I I, Coax I, Coax N/A
Number of Contacts 55 13 6 2 7 12 4 3
Contact Size 20 20 8 Coax 20 8 Coax 20 16 8 Coax
A M A a A B
A L N B Z
Y b C
Z P X u c D
F B F B Y a Q t AA d
W E
G K f b C s y v e
G X g R V DD BB f F
r z
J e c D G
E C W d S U q CC g
x w h H
V T T p
E C H U E n i J
G F S m k j
D R K
D P M L
N
Insert Arrangement 22-78 22-96 24-31 24-51
Service Rating Coax II I I
Number of Contacts 7 7 31 47 4
Contact Size 8 Coax 12 for 16 20 12 Coax
# 10 wire
A Z a A
Z a b B Y B
Y c C F
u v d X s t b c C
X t w D z D
HH e W r y u d
W GG NN JJ x E BB AA D A
s f q e E
V FF PP y V
r MM KK F F
EE g p f
U LL z G U
q h n g G E
T DD AA T m h C B
p CC i H x w v H
S BB S k
n m k j J j i J
R K R K
P L P N L
N M M
Insert Arrangement 24-61 24-71 24-79
Service Rating I N/A Coax
Number of Contacts 61 45 2 2 1 5
Contact Size 20 20 16 8 Coax 20 8 Coax
Contact Legend
Symbol Contact Size
20
16
12
HV
12 Coax
8 Coax
11
Amphenol ® PT, SP, MS/PT
Proprietary/MIL-C-26482, Series 1
bayonet coupling and solder termination
Amphenol® solder contact miniature cylindrical connectors
meet the most critical application needs. Design versatility
combined with high reliability performance makes these
series of Miniature Cylindrical Connectors ideal for environ-
mental sealing or pressurized applications.
wall mounting The MS/PT Series is qualified to MIL-C-26482, Series 1 and has
receptacle all the outstanding design characteristics and quality of the PT
Series. The SP Series is a modification of the PT, providing special
shells with a wide mounting flange for back panel mounting.
A corrosion resistant electrically conductive finish of cadmium
plate with an olive drab chromate after-treatment is used on the PT
and MS/PT. The SP is given a durable non-conductive hard anodic
cable connecting “Alumilite”® coating which provides abrasion protection and resis-
receptacle* tance to corrosion.
Shell components for these series are aluminum. The dependable
5 key/keyway polarization with bayonet lock coupling assures pos-
itive mating with no chance of cross plugging. Spring tension pro-
vided by a wave washer in the coupling nut ensures maintenance
of interfacial seal between mating halves.
box mounting Both the insert and main joint gasket are molded from resilient
receptacle neoprene. This provides excellent moisture sealing at the gasket
and superior electrical isolation of the contact in the insert.
Both pins and sockets are machined from a copper alloy and are
gold plated. This gold plating eliminates contact corrosion and
offers an indefinite shelf life. Socket contacts for these series are a
closed entry design. A breakaway style plug is available in the PT
straight plug solder series. Hermetics receptacles are available in PT and MS/
PT solder series. Receptacles with printed circuit board contacts
are also available.
PT Solder is UL recognized under file #E115497, Vol. 1, Sec. 5.
The PT, SP and MS/PT Series are intermateable and intermount-
able with all existing Miniature Cylindrical Series connectors
except for the threaded coupling PC Series.
jam nut
receptacle Refer to pages 4-11 for insert arrangement availability.
PT, SP, MS/PT
CONTACT DATA/CONNECTOR RATINGS
Contact Specifications
thru bulkhead Contact Test Maximum Solder Well Solder Well
Size Current Millivolt Drop† Diameter Depth
receptacle +.004 +.031
20 7.5 55 .046 –.000 .125 –.000
16 13.0 50 .078 +.005 .188 +.031
–.003 –.000
12 23.0 42 +.004 +.031
.116 –.002 .188 –.000
breakaway Service Rating
twist pull Recommended Test Voltage AC (RMS), 60 cps
plug Operating
Service AC Voltage Sea 50,000 70,000 110,000
Rating at Sea Level Level ft. ft. ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
† Silver plated wire per MIL-C-26482
12 * This connector style is sometimes referred to as a cable connecting
“plug.” It does, however, mate with a straight or 90 degree plug.
PT, SP Service Classes
PT and SP connectors are available in the service
classes listed below. Each class, with the exception of
hermetic, offers one or more means of terminating or PT, SP, MS/PT WITH SOLDER CONTACTS BAYONET COUPLING
supporting a cable or wire bundle. Class “W” is not
available in the SP Series.
“A” General duty; back shell is threaded for con- “A”
duit attachment of MS3057 cable clamp general duty
“A” (SR) General duty, with strain relief clamp for
cable or wire bundle support
“C” Pressurized receptacle; less than 1 cu. in.
per hour leakage at 30 psi over a tempera-
ture range of –65°F to +257°F
“E” Environmental resistant connectors - sup-
plied with a multi-holed grommet and clamp- “E” (SR),
ing nut for moisture-proofing individual open MS / “F”
wires
“E” (SR) Environmental resistant strain relief clamp strain relief
and grommet for moisture proofing individual
wires; provides added wire bundle support
“J” Same as “W” class except with strain relief
“P” Translucent nylon boot for retaining cus-
tomer-applied potting compounds; held in
place by a threaded ring
“P” (SR) Strain relief clamp suitable for retaining cus- “E”,
tomer applied potting compounds, with pro- MS / “E”
vision for wire support open wire seal
“W” Compressing clamp and neoprene gland for
moisture proofing multi-conductor jacketed
cables. Telescoping sleeves (MS 3420A)
can be used to adapt to cables smaller than
minimum close-down.
“H”* Hermetically sealed with compression glass
inserts (see pages 22-25)
Style with printed circuit board contacts- see page 20. “P”,
Breakaway style - see page 26. MS / “P”
potting boot
MS/PT Service Classes
The MS/PT Miniature connector is available in the fol-
lowing certified service classes:
“E” Environmental resistant connectors - sup-
plied with a multi-holed grommet and clamp-
ing nut for moisture-proofing individual open “W”
wires cable seal
“F” Grommet seal with strain relief clamp
“P” Translucent nylon boot for retaining cus-
tomer-applied potting compounds; held in
place by a threaded ring
13
PT00 (MS3110)
SP00
wall mounting receptacle
S PT L
R .120 ± .005 Dia. M Q
(TP) (.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
(TRP)S 4 Holes
A
“W” Cable Seal
K Z L
TERMINATION ASSEMBLIES
“A” General Duty/ “A” (SR), “E” (SR), “P” (SR), “E” Open Wire Seal “P” Potting Boot
“C” Pressurized“ MS / “F” Strain Relief
N D
L V L L L
PT00W-XX-XXX
N D N G DH N N D
“J” Cable Seal
XL
.375 MIN C
PT00A-XX-XXX PT00A-XX-XXX (SR) PT00E-XX-XXX PT00P-XX-XXX
SP00A-XX-XXX SP00A-XX-XXX (SR) SP00E-XX-XXX SP00P-XX-XXX
PT00C-XX-XXX PT00E-XX-XXX (SR) MS3110E-XX-XXX MS3110P-XX-XXX N D
SP00E-XX-XXX (SR)
PT00P-XX-XXX (SR)
SP00P-XX-XXX (SR)
MS3110F-XX-XXX
To complete part number see how to order on page 27. PT00J-XX-XXX
■ (MMC) located within .0025 of (TP) MS3110J-XX-XXX
Receptacle Front View Receptacle Side View Class “A”, “C”
R S A K +.020 M +.010 Q Z V
Shell (TP) Max. +.001 –.010 L –.000 Thread Max. D L N Thread
Size PT SP PT SP –.005 PT SP Max. PT SP Class 2A PT SP Min. Max. Max. Class A
6 .469 .641 .688 .953 .348 .493 .524 .906 .431 .462 .3125-32 NEF .468 .438 .175 1.553 .462 .3750-32 NEF
8 .594 .734 .812 1.047 .473 .493 .524 .906 .431 .462 .4375-28 UNEF .468 .438 .297 1.553 .590 .5000-28 UNEF
10 .719 .812 .938 1.125 .590 .493 .524 .906 .431 .462 .5625-24 NEF .468 .438 .421 1.553 .717 .6250-24 NEF
12 .812 .938 1.031 1.250 .750 .493 .524 .906 .431 .462 .6875-24 NEF .468 .438 .546 1.553 .834 .7500-20 UNEF
14 .906 1.031 1.125 1.344 .875 .493 .524 .906 .431 .462 .8125-20 UNEF .468 .438 .663 1.553 .970 .8750-20 UNEF
16 .969 1.125 1.219 1.438 1.000 .493 .524 .906 .431 .462 .9375-20 UNEF .468 .438 .787 1.553 1.088 1.0000-20 UNEF
18 1.062 1.203 1.312 1.516 1.125 .493 .524 .906 .431 .462 1.0625-18 NEF .531 .438 .879 1.553 1.216 1.1875-18 NEF
20 1.156 1.297 1.438 1.672 1.250 .650 .650 1.125 .556 .556 1.1875-18 NEF .531 .531 1.014 1.703 1.332 1.1875-18 NEF
22 1.250 1.375 1.562 1.750 1.375 .650 .650 1.125 .556 .556 1.3125-18 NEF .531 .531 1.134 1.703 1.460 1.4375-18 NEF
24 1.375 1.500 1.688 1.875 1.500 .683 .683 1.188 .589 .589 1.4375-18 NEF .498 .498 1.259 1.765 1.585 1.4375-18 NEF
Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Class “E”, MS / “E” Class “P”, MS / “P” Class “W”, “J”
Shell C D G H L N L N D L N D L N XL
Size Thread Min. Max. Max. Max. Max. Max. Max. Min. Max. Max. Closed Free Max. Max. Max.
6 – – – – – – 1.266 .440 .192 1.438 .484 – – – – –
8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 1.705 .547 2.271
10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 1.705 .675 2.271
12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .858 .338 .442 1.848 .812 2.411
14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .984 .416 .539 2.040 .940 2.599
16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110 .550 .616 2.256 1.067 2.943
18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234 .600 .672 2.486 1.194 3.172
20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360 .635 .747 2.922 1.322 3.610
22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484 .670 .846 3.086 1.449 3.766
24 8-32 .990 .800 1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610 .740 .894 3.310 1.576 3.985
All dimensions for reference only.
14
PT01 (MS3111)
cable connecting receptacle
L
S M Q
Y S
A
“W” Cable Seal
K L
Z
TERMINATION ASSEMBLIES
“A” General Duty “A” (SR), “E” (SR), “P” (SR), “E” Open Wire Seal “P” Potting Boot
MS / “F” Strain Relief N D
L V L L L
PT01W-XX-XXX
N D N GD H N N D
“J” Cable Seal
XL
.375 MIN C
PT01A-XX-XXX PT01A-XX-XXX (SR) PT01E-XX-XXX PT01P-XX-XXX N D
PT01E-XX-XXX (SR) MS3111E-XX-XXX MS3111P-XX-XXX
PT01P-XX-XXX (SR)
MS3111F-XX-XXX
Note: This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug. PT01J-XX-XXX
To complete part number see how to order on page 27. MS3111J-XX-XXX
Recept. Front View Receptacle Side View Class “A”,
A K M Q V
Shell S Y +.001 +.020 L +.016 Thread Z D L N Thread
Size ±.020 ±.020 –.005 –.010 Max. –.000 Class 2A Max. Min. Max. Max. Class A
6 .688 .812 .348 .494 .906 .400 .3125-32 NEF .948 .175 1.553 .462 .3750-32 NEF
8 .812 .938 .473 .494 .906 .400 .4375-28 UNEF .948 .297 1.553 .590 .5000-28 UNEF
10 .938 1.062 .590 .494 .906 .400 .5625-24 NEF .948 .421 1.553 .717 .6250-24 NEF
12 1.031 1.156 .750 .494 .906 .400 .6875-24 NEF .948 .546 1.553 .834 .7500-20 UNEF
14 1.125 1.250 .875 .494 .906 .400 .8125-20 UNEF .948 .663 1.553 .970 .8750-20 UNEF
16 1.219 1.344 1.000 .494 .906 .400 .9375-20 UNEF .948 .787 1.553 1.088 1.0000-20 UNEF
18 1.312 1.438 1.125 .494 .906 .400 1.0625-18 NEF .948 .879 1.553 1.216 1.1875-18 NEF
20 1.438 1.562 1.250 .650 1.125 .535 1.1875-18 NEF 1.166 1.041 1.703 1.332 1.1875-18 NEF
22 1.562 1.688 1.375 .650 1.125 .535 1.3125-18 NEF 1.166 1.135 1.703 1.460 1.4375-18 NEF
24 1.688 1.812 1.500 .683 1.188 .568 1.4375-18 NEF 1.166 1.259 1.765 1.585 1.4375-18 NEF
Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Class “E”, MS / “E” Class “P”, MS / “P” Class “W”, “J”
Shell C D G H L N L N D L N D L N XL
Size Thread Min. Max. Max. Max. Max. Max. Max. Min. Max. Max. Closed Free Max. Max. Max.
6 – – – – – – 1.266 .440 .192 1.438 .484 – – – – –
8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 1.705 .547 2.271
10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 1.705 .675 2.271
12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .858 .338 .442 1.848 .812 2.411
14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .984 .416 .539 2.040 .940 2.599
16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110 .550 .616 2.256 1.067 2.943
18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234 .600 .672 2.486 1.194 3.172
20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360 .635 .747 2.922 1.322 3.610
22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484 .670 .846 3.086 1.449 3.766
24 8-32 .990 .800 1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610 .740 .894 3.310 1.576 3.985
All dimensions for reference only.
15
PT02 (MS3112)
SP02
box mounting receptacle
S PT L
R .120 ± .005 Dia. M
(TP) (.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
(TRP)S 4 Holes A N
K Z
PT02A-XX-XXX
SP02A-XX-XXX
* PT02C-XX-XXX
* SP02C-XX-XXX
* PT02E-XX-XXX
* SP02E-XX-XXX
MS3112E-XX-XXX
* PT02P-XX-XXX
* SP02P-XX-XXX
MS3112P-XX-XXX
* PT02W-XX-XXX
* SP02W-XX-XXX
To complete part number see how to order on page 27.
■ (MMC) located within .0025 of (TP)
* The PT02 and SP02 box mounting receptacles are made only to complete a series;
no provision is made for accessories or potting on the rear skirt.
Receptacle Front View Receptacle Side View
K M
R A +.020 +.010 N Z
Shell (TP) S +.001 –.010 L –.000 Dia. Max.
Size PT SP PT SP –.005 PT SP Max. PT SP Max. PT SP
6 .469 .641 .688 .953 .348 .493 .524 .825 .431 .462 .323 .465 .438
8 .594 .734 .812 1.047 .473 .493 .524 .825 .431 .462 .449 .465 .438
10 .719 .812 .938 1.125 .590 .493 .524 .825 .431 .462 .573 .465 .438
12 .812 .938 1.031 1.250 .750 .493 .524 .825 .431 .462 .699 .465 .438
14 .906 1.031 1.125 1.344 .875 .493 .524 .825 .431 .462 .823 .465 .438
16 .969 1.125 1.219 1.438 1.000 .493 .524 .825 .431 .462 .949 .465 .438
18 1.062 1.203 1.312 1.516 1.125 .493 .524 .825 .431 .462 1.073 .465 .438
20 1.156 1.297 1.438 1.672 1.250 .650 .650 1.076 .556 .556 1.199 .526 .531
22 1.250 1.375 1.562 1.750 1.375 .650 .650 1.076 .556 .556 1.323 .526 .531
24 1.375 1.500 1.688 1.875 1.500 .683 .683 1.109 .589 .589 1.449 .493 .497
All dimensions for reference only.
16
PT06 (MS3116)
SP06
straight plug
S L
J Z Q
“W” Cable Seal
L
TERMINATION ASSEMBLIES
“A” General Duty “A” (SR), “E” (SR), “P” (SR), “E” Open Wire Seal “P” Potting Boot
MS / “F” Strain Relief
L V L L L N D
N D N GDH N N D PT06W-XX-XXX
SP06W-XX-XXX
PTG06W-XX-XXX
.375 MIN C “J” Cable Seal
PT06A-XX-XXX PT06A-XX-XXX (SR) PT06E-XX-XXX PT06P-XX-XXX XL
SP06A-XX-XXX SP06A-XX-XXX (SR) SP06E-XX-XXX SP06P-XX-XXX
PTG06A-XX-XXX PTG06A-XX-XXX (SR) PTG06E-XX-XXX PTG06P-XX-XXX
PT06E-XX-XXX (SR) MS3116E-XX-XXX MS3116P-XX-XXX
SP06E-XX-XXX (SR) N D
PTG06E-XX-XXX (SR)
PT06P-XX-XXX (SR)
SP06P-XX-XXX (SR)
PTG06P-XX-XXX (SR)
MS3116F-XX-XXX PT06J-XX-XXX
To complete part number see how to order on page 27. MS3116J-XX-XXX
Plug Front View Plug Side View Class “A”
Shell S L Q Thread Z D L N V Thread
Size Max. J Max. Class 2A Max. Min. Max. Max. Class A
6 .625 .353 .906 .3125-32 NEF .594 .175 1.609 .462 .3750-32 NEF
8 .750 .353 .906 .4375-28 UNEF .594 .297 1.609 .590 .5000-28 UNEF
10 .859 .353 .906 .5625-24 NEF .594 .421 1.609 .717 .6250-24 NEF
12 1.013 .353 .906 .6875-24 NEF .594 .546 1.609 .834 .7500-20 UNEF
14 1.156 .353 .906 .8125-20 UNEF .594 .663 1.609 .970 .8750-20 UNEF
16 1.281 .353 .906 .9375-20 UNEF .594 .787 1.609 1.088 1.0000-20 UNEF
18 1.319 .353 .906 1.0625-18 NEF .594 .879 1.609 1.216 1.1875-18 NEF
20 1.531 .415 1.062 1.1875-18 NEF .672 1.014 1.656 1.332 1.1875-18 NEF
22 1.656 .415 1.062 1.3125-18 NEF .672 1.135 1.656 1.460 1.4375-18 NEF
24* 1.776 .415 1.125 1.4375-18 NEF .672 1.259 1.750 1.587 1.4375-18 NEF
Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Class “E”, MS / “E” Class “P”, MS / “P” Class “W”, “J”
Shell C D G H L N L N D L N D L N XL
Size Thread Min. ±.010 Max. Max. Max. Max. Max. Min. Max. Max. Closed Free Max. Max. Max.
6 – – – – – – 1.266 .440 .192 1.526 .484 – – – – –
8 6-32 .240 .125 .812 1.906 .550 1.266 .560 .317 1.526 .608 .168 .230 1.705 .547 2.271
10 6-32 .302 .188 .875 1.906 .675 1.266 .685 .434 1.526 .734 .205 .312 1.705 .675 2.271
12 6-32 .428 .312 1.000 1.906 .803 1.266 .813 .548 1.526 .858 .338 .442 1.848 .812 2.411
14 6-32 .552 .375 1.125 1.906 .920 1.266 .930 .673 1.526 .984 .416 .539 2.040 .940 2.599
16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.526 1.110 .550 .616 2.256 1.067 2.943
18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.526 1.234 .600 .672 2.486 1.194 3.172
20 8-32 .740 .625 1.438 2.250 1.290 1.438 1.301 1.024 1.546 1.360 .635 .747 2.844 1.322 3.610
22 8-32 .928 .750 1.625 2.250 1.418 1.438 1.430 1.149 1.546 1.484 .670 .846 3.000 1.449 3.766
24* 8-32 .990 .800 1.750 2.312 1.543 1.500 1.555 1.274 1.656 1.610 .740 .894 3.210 1.576 3.985
* Available in PT06 only
All dimensions for reference only.
17
PT07 (MS3114)
SP07
jam nut receptacle
S M
H Z
S J A “A” General Duty/
“C” Pressurized Receptacle
PT07A-XX-XXX
PT07C-XX-XXX
R P
K
TERMINATION ASSEMBLIES
“E” Open Wire Seal “A” (SR), “E” (SR), “P” (SR), MS / “F” Strain Relief “P” Potting Boot
M Z M Z M Z
J A N J A GD H J A D N
R R C R
P L P L P L
PT07E-XX-XXX PT07A-XX-XXX (SR) PT07P-XX-XXX
SP07E-XX-XXX SP07A-XX-XXX (SR) MS3114P-XX-XXX
MS3114E-XX-XXX PT07E-XX-XXX (SR)
MS3114F-XX-XXX
To complete part number see how to order on page 27.
Recept. Front View Receptacle Side View Class “E”, MS / “E”
A Dia. J Flat K P Panel Thickness R
Shell H +.001 +.000 +.011 Thread L N Z
Size ±.016 S –.005 –.010 –.010 M Min. Max. Class 2A UNEF Z Max. M Max. ±.040
6 .625 .812 .348 .405 .125 .696 .062 .125 .4375-28 .231 .568 .696 .604 .191
8 .750 .938 .473 .530 .125 .696 .062 .125 .5625-24 .231 .568 .696 .729 .191
10 .875 1.062 .590 .655 .125 .696 .062 .125 .6875-24 .231 .568 .696 .854 .191
12 1.062 1.250 .750 .818 .125 .696 .062 .125 .8750-20 .231 .568 .696 .979 .191
14 1.188 1.375 .875 .942 .125 .696 .062 .125 1.0000-20 .231 .568 .696 1.104 .191
16 1.312 1.500 1.000 1.066 .125 .696 .062 .125 1.1250-18 .231 .568 .696 1.229 .191
18 1.438 1.625 1.125 1.191 .125 .696 .062 .125 1.2500-18 .231 .568 .696 1.354 .191
20 1.562 1.812 1.250 1.316 .156 .884 .062 .250 1.3750-18 .261 .630 .884 1.510 .221
22 1.688 1.938 1.375 1.441 .156 .884 .062 .250 1.5000-18 .261 .630 .884 1.635 .221
24 1.816 2.062 1.500 1.566 .156 .917 .062 .250 1.6250-18 .228 .660 .917 1.760 .188
Class “A” (SR), “P” (SR), MS / “F” Class “E” (SR) Class “P”, MS / “P”
Shell C D C D D L +.010
Size Thread Max. G H L M Thread Max. G H L M Max. –.026 M N Z
6 – – – – – – – – – – – – .202 .593 .696 .484 .191
8 6-32 .250 .125 .781 1.062 .696 6-32 .250 .125 .775 1.029 .696 .327 .593 .696 .608 .191
10 6-32 .312 .188 .844 1.062 .696 6-32 .312 .188 .837 1.029 .696 .444 .593 .696 .734 .191
12 6-32 .438 .312 .969 1.062 .696 6-32 .438 .312 .963 1.029 .696 .558 .593 .696 .858 .191
14 6-32 .562 .375 1.094 1.062 .696 6-32 .562 .375 1.087 1.029 .696 .683 .593 .696 .984 .191
16 6-32 .625 .500 1.156 1.188 .696 6-32 .625 .500 1.150 1.161 .696 .808 .593 .696 1.110 .191
18 8-32 .750 .625 1.406 1.188 .696 8-32 .750 .625 1.400 1.161 .696 .909 .593 .696 1.234 .191
20 8-32 .750 .625 1.406 1.250 .884 8-32 .750 .625 1.400 1.224 .884 1.034 .718 .884 1.360 .221
22 8-32 .938 .750 1.594 1.250 .884 8-32 .938 .750 1.587 1.224 .884 1.159 .718 .884 1.484 .221
24* 8-32 1.000 .800 1.594 1.250 .917 8-32 1.000 .800 1.681 1.320 .917 1.284 .718 .917 1.610 .188
* Size 24 strain relief available in PT only. All dimensions for reference only.
18
PT08 E
SP08 E
90 degree plug
G
TERMINATION ASSEMBLIES
“E” Open Wire Seal, “E” (SR) Strain Relief “P” Potting Boot 75 degrees
L L
E
B A
PT08E-XX-XXX PT08P-XX-XXX H
SP08E-XX-XXX SP08P-XX-XXX
PT08E-XX-XXX (SR) D
SP08E-XX-XXX (SR) K
C
To complete part number see how to order on page 27.
All lockwire holes are .044 Dia. Min.
Plug Front View Plug Side View
Class “E”, “E” (SR) Class “P”
G C E
Shell Dia. B +.010 D +.047 L A H K L
Size Max. ±.031 –.025 ±.062 –.025 ±.057 ±.025 ±.015 ±.015 Max.
8 .796 .655 .169 .941 .339 1.786 .469 .312 .438 1.656
10 .921 .749 .170 1.191 .393 1.880 .547 .438 .562 1.781
12 1.046 .812 .264 1.191 .450 1.965 .625 .516 .688 1.843
14 1.171 .905 .310 1.254 .519 2.113 .734 .625 .781 1.953
16 1.297 1.030 .330 1.316 .583 2.315 .750 .656 .890 2.000
18 1.422 1.015 .444 1.562 .621 2.423 .781 .703 1.000 2.046
20 1.562 1.077 .510 1.625 .683 2.695 .859 .766 1.125 2.218
22 1.672 1.139 .515 1.719 .739 2.742 .906 .812 1.234 2.265
24 1.797 1.265 .656 1.751 .797 2.980 1.169 .918 1.374 2.624
All dimensions for reference only.
19
PT Connectors with
Printed Circuit Board Contacts
S 4 HOLES L
R .120 ± .005 Dia. M .030 ± .001
(TP) (.147 ± .005 Dia., size 24)
Box Mounting Receptacle (PT02)
with PCB Contacts
(TRP)S A N
Order by applicable part number in chart below;
add insert arrangement number. Refer to insert availability
on pages 4-11.
■ (MMC) located within .0025 of (TP) K Z
Receptacle Front View Receptacle Side View
Part Number* S A K M N Z
Shell PT02 with PCB R +.011 +.001 +.021 L +.010 Dia. +.040
Size Contacts (TP) –.010 –.005 –.010 Max. –.000 Max. –.050
6 71-570120-XXX .469 .688 .348 .493 .825 .431 .323 .380
8 71-570121-XXX .594 .812 .473 .493 .825 .431 .449 .380
10 71-570122-XXX .719 .938 .590 .493 .825 .431 .573 .380
12 71-570123-XXX .812 1.031 .750 .493 .825 .431 .699 .380
14 71-570124-XXX .906 1.125 .875 .493 .825 .431 .823 .380
16 71-570125-XXX .969 1.219 1.000 .493 .825 .431 .949 .380
18 71-570126-XXX 1.062 1.312 1.125 .493 .825 .431 1.073 .380
20 71-570127-XXX 1.156 1.438 1.250 .650 1.076 .556 1.199 .286
22 71-570128-XXX 1.250 1.562 1.375 .650 1.076 .556 1.323 .286
24 71-570129-XXX 1.375 1.688 1.500 .683 1.109 .589 1.449 .253
All dimensions for reference only.
S M Z
H
Jam Nut Receptacle (PT07)
with PCB Contacts S J A
All lockwire holes are .044 Dia. Min. .030 ± .001
Order by applicable part number in chart below;
add insert arrangement number. Refer to insert availability R
on pages 4-11. P K
Receptacle Front
View Receptacle Side View
Part Number* H A Dia. J Flat K P Panel R Z
Shell PT07 with PCB +.017 S +.001 +.000 +.011 M Thickness Thread +.025
Size Contacts –.016 ±.010 –.005 –.010 –.010 ±.010 Min. Max. Class 2A –.035
6 71-533720-XXX .625 .812 .348 .405 .125 .696 .062 .125 .4375-28 UNEF .376
8 71-533721-XXX .750 .938 .473 .530 .125 .696 .062 .125 .5625-24 UNEF .376
10 71-533722-XXX .875 1.062 .590 .655 .125 .696 .062 .125 .6875-24 UNEF .376
12 71-533723-XXX 1.062 1.250 .750 .818 .125 .696 .062 .125 .8750-20 UNEF .376
14 71-533724-XXX 1.188 1.375 .875 .942 .125 .696 .062 .125 1.0000-20 UNEF .376
16 71-533725-XXX 1.312 1.500 1.000 1.066 .125 .696 .062 .125 1.1250-18 UNEF .376
18 71-533726-XXX 1.438 1.625 1.125 1.191 .125 .696 .062 .125 1.2500-18 UNEF .376
20 71-533727-XXX 1.562 1.812 1.250 1.316 .156 .884 .062 .250 1.3750-18 UNEF .367
22 71-533728-XXX 1.688 1.938 1.375 1.441 .156 .884 .062 .250 1.5000-18 UNEF .367
24 71-533729-XXX 1.816 2.062 1.500 1.566 .156 .917 .062 .250 1.6250-18 UNEF .334
All dimensions for reference only. * For RoHS compliance connectors with PCB contacts change “71”- to:
“58” designates conductive black zinc cobalt plating
“93” designates non-conductive black zinc cobalt plating
20
PTB
SPB
thru bulkhead receptacle
L
S PTB M
R .120 ± .005 Dia. P
(TP) (.147 ± .005 Dia., size 24)
SPB
.150 ± .005 Dia.
(TRP)S 4 Holes
A A
K
* PTB-XX-XXX
* SPB-XX-XXX
* To complete part number add desired arrangement number (refer to pages 4 and 5 for insert availability) and add “PS”;
Example: PTB-18-32PS. If a rotation is required, use PTB-18-32PS and add W, X, Y or Z. Example: PTB-18-32 PSW.
The socket end of the insert always appears at the “P” dimension end of shell.
■ (MMC) located within .0025 of (TP)
Receptacle Front View Receptacle Side View
R A K M P
Shell (TP) S +.001 +.016 L +.010 Max.
Size PTB SPB PTB SPB –.005 –.000 ±.005 –.000 PTB SPB
6 .469 .641 .688 .953 .348 .625 1.050 .562 .125 .188
8 .594 .734 .812 1.047 .473 .625 1.050 .562 .125 .188
10 .719 .812 .938 1.125 .590 .625 1.050 .562 .125 .188
12 .812 .938 1.031 1.250 .750 .625 1.050 .562 .125 .188
14 .906 1.031 1.125 1.344 .875 .625 1.050 .562 .125 .188
16 .969 1.125 1.219 1.438 1.000 .625 1.050 .562 .125 .188
18 1.062 1.203 1.312 1.516 1.125 .625 1.050 .562 .125 .188
20 1.156 1.297 1.438 1.672 1.250 .781 1.330 .688 .125 .312
22 1.250 1.375 1.562 1.750 1.375 .781 1.330 .688 .125 .312
24 1.375 1.500 1.688 1.875 1.500 .781 1.330 .688 .125 .312
All dimensions for reference only.
21
PT
hermetic
Three shell styles are available in the hermetic PT bayonet
series:
• PTIH (MS3113H)
• PT02H
• PT07H (MS3114H)
These hermetic connectors are only available with solder cup or
flat eyelet pin contacts in the MS/PT version. Socket contacts
are available in some proprietary PT versions. Other design
solder characteristics of the PT hermetic connector series are as fol-
mounting lows:
receptacle Shell sizes: 8 through 24 (tin plated)
Contact count: 2 through 61. Refer to pages 4 and 5 for insert
availability for hermetics.
Current: 5.0 amp each #20 contact
10 amp each #16 contact
17 amp each #12 contact
Contacts are tin plated for PT; gold is optional
Dielectric Withstanding Voltage (sea level):
1500 volts (RMS) 60 cps, Service Rating I
2300 volts (RMS) 60 cps, Service Rating II
Compression glass inserts, permanently lettered
Helium Leakage: Less than 1.0 X 10-6 cc/sec.
at 15 psi differential
box Physical Shock: 100 G’s
mounting
receptacle Vibration: Exceeds MIL-E-5272 Procedure II
Thermal Shock: No deterioration or failure after 5 cycles
at –55°F to +257°F
Intermateability: Mates with MS3116 and PT06
Refer to pages 4-11 for insert arrangement availability.
jam nut
receptacle
22
PTIH (MS3113H)
hermetic solder mounting receptacle
G L W
A N
.031 +.006 Z
–.005
* PTIH-XX-XXX
** PTIY-XX-XXX
** MS3113H-XXCXXX
† PTIH-XX-XXX (100)
†† PTIY-XX-XXX (100)
†† MS3113H-XXYXXX
To complete part number see how to order on page 27.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
† Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
Recept. Receptacle
Front View Side View
G A Dia. L N Dia. W
Shell Dia. +.001 +.025 +.001 +.011 Z
Size Max. –.005 –.016 –.005 –.010 Max.
6 .511 .348 .447 .438 .094 .386
8 .636 .473 .447 .562 .094 .386
10 .761 .590 .447 .672 .094 .386
12 .855 .750 .447 .781 .094 .386
14 .980 .875 .447 .906 .094 .386
16 1.105 1.000 .447 1.031 .094 .386
18 1.229 1.125 .447 1.156 .094 .386
20 1.323 1.250 .509 1.250 .094 .386
22 1.449 1.375 .509 1.375 .125 .418
24 1.574 1.500 .542 1.500 .125 .418
All dimensions for reference only.
23
PT02H
hermetic box mounting receptacle
S PT
R .120 ± .005 Dia. L W
(TP) (.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
4 Holes
(TRP)S A N
U Z
* PT02H-XX-XXX
** PT02Y-XX-XXX
† PT02H-XX-XXX (100)
†† PT02Y-XX-XXX (100)
To complete part number see how to order on page 27.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
† Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
■ (MMC) located within .0025 of (TP)
Receptacle Front View Receptacle Side View
A Dia. L N Dia. U
Shell R S +.001 K +.025 +.001 +.011 Z
Size (TP) ±.016 –.005 ±.015 –.015 –.005 –.010 Max.
6 .469 .688 .348 .047 .494 .438 .062 .344
8 .594 .812 .473 .047 .494 .562 .062 .344
10 .719 .938 .590 .047 .494 .672 .062 .344
12 .812 1.031 .750 .047 .494 .781 .062 .344
14 .906 1.125 .875 .047 .494 .906 .062 .344
16 .969 1.219 1.000 .047 .494 1.031 .062 .344
18 1.062 1.312 1.125 .047 .494 1.156 .062 .344
20 1.156 1.438 1.250 .047 .556 1.250 .062 .344
22 1.250 1.562 1.375 .079 .556 1.375 .062 .377
24 1.375 1.688 1.500 .079 .588 1.500 .062 .377
All dimensions for reference only.
24
PT07H (MS3114H)
hermetic jam nut receptacle
S
H M Z
S A
R P
K
* PT07H-XX-XXX
** PT07Y-XX-XXX
** MS3114H-XXCXXX
† PT07H-XX-XXX (100)
†† PT07Y-XX-XXX (100)
†† MS3114H-XXYXXX
To complete part number see how to order on page 27.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
† Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
Receptacle Front
View Receptacle Side View
H Hex A K M P Panel Thickness R
Shell S +.017 +.001 +.043 +.031 Thread Z
Size +.016 –.016 –.005 –.016 –.000 Max. Min. Class 2A Max.
6 .812 .625 .348 .094 .696 .125 .062 .4375-28 UNEF .206
8 .938 .750 .473 .094 .696 .125 .062 .5625-24 NEF .206
10 1.062 .875 .590 .094 .696 .125 .062 .6875-24 NEF .206
12 1.250 1.062 .750 .094 .696 .125 .062 .8750-20 UNEF .206
14 1.375 1.188 .875 .094 .696 .125 .062 1.0000-20 UNEF .206
16 1.500 1.312 1.000 .094 .696 .125 .062 1.1250-18 NEF .206
18 1.625 1.438 1.125 .094 .696 .125 .062 1.2500-18 NEF .206
20 1.812 1.562 1.250 .125 .884 .250 .062 1.3750-18 NEF .081
22 1.938 1.688 1.375 .125 .884 .250 .062 1.5000-18 NEF .081
24 2.062 1.812 1.500 .125 .917 .250 .062 1.6250-18 NEF .048
All dimensions for reference only.
25
PT Breakaway
twist pull plug
The PT miniature breakaway connector has the follow- 4.500
±.250
ing design features: L
• solder contacts, potted termination .016 +.010 J
–.025
• instant decoupling of plug and receptacle with an SOCKET INSERT +.010
axial pull on the lanyard when they are fully mated .328 –.025
• intermateable with standard receptacles PIN INSERT
• operating voltage to 900 VAC (RMS) at sea level
• same quick positive bayonet coupling and 5 key/ H B
keyway polarization as other PT styles
LANYARD PULLED TAUT A
AGAINST A .200 ±.031 DIA MANDREL
Breakaway Plug
with PT Solder Contacts,
Potted Termination
Part Shell A Dia. B H J L 71-3048XX-( )
Number* Size Max. Max. ±.016 ±.010 Max. 72-3048XX-( )
71-304808 8 .875 .984 .327 .353 1.937
71-304810 10 1.125 1.125 .444 .353 1.890
71-304812 12 1.281 1.406 .558 .353 1.906
71-304814 14 1.438 1.562 .683 .353 1.953
71-304816 16 1.562 1.688 .808 .353 2.000
71-304818 18 1.718 1.844 .909 .353 2.031
71-304820 20 1.875 2.000 1.034 .415 2.234
71-304822 22 2.031 2.188 1.159 .415 2.328
71-304824 24 2.156 2.312 1.284 .415 2.359
All dimensions for reference only.
* See Finish information below to determine prefix 71 or 72 in part number.
Drawing above shows standard lanyard length.
Order by Amphenol Propriety number as follows (example part number shown):
71 - 3048 18 - 32 P
1 2 3 4
1. Finish
“71”designates corrosion resistant olive drab cadmium plate
“72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and
corrosion resistance, 500 hour extended salt spray.
2. Connector Type Identification
3048 designates PT plug, solder, potted termination style
3. Shell Size and Insert Arrangement Number
See insert arrangement availability for Miniature Breakaway connectors on page 6. The numbers in the insert
arrangement are hyphenated. The number preceding the hyphen is the shell size. The number following the hyphen is
the insert arrangement number.
4. Contact Type/Alternate Insert Rotation Pin Contacts Socket Contacts
P designates pin, S designates socket for normal Amphenol Equates to Amphenol Equates to
positioning of inserts. When an alternate position Letter MS letter Letter MS letter
of the insert is required to prevent cross-mating G PW H SW
a different letter (other than P or S) is used. See I PX J SX
page 7 for description of alternate positions; then K PY L SY
convert to Amphenol proprietary coding by the M PZ N SZ
chart at right to complete the part number.
26
PT, SP, MS/PT
how to order
PT, SP MS/PT
To more easily illustrate ordering procedure, part number PT00A-20-41PW(SR) is MIL-C-26482, Series 1
shown as follows: Part number MS3110E20-41PW is shown as follows:
PT 00 A - 20 - 41 P W (SR) MS 311 0 E 20 - 41 P W PT, SP, MS/PT HOW TO ORDER
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
See code below: For Hermetic connectors part number
1. Connector Type MS3113H20Y41PW is shown as follows:
“PT” designates standard olive drab, electrically conductive cadmium plate MS 311 3 H 20 Y 41 P W
bayonet lock connector with solder contacts 1 2 3 4 5, 6 7 8
“SP” designates electrically non-conductive, hard anodic coated bayonet lock
connector with solder contacts and larger flange and mounting holes for See code below:
back panel mounting 1. “MS” designates Military Standard
“PTG” designates plug with grounding fingers 2. Specification Number
2. Shell Style “311” designates basic family number for MIL-C-
“00” designates wall mounting receptacle 26482, Series 1 solder type
“01” designates cable connecting receptacle** 3. Shell Style
“02” designates box mounting receptacle “0” designates wall mounting receptacle
“06” designates straight plug “1” designates cable connecting receptacle**
“07” designates jam nut receptacle “2” designates box mounting receptacle
“08” designates 90 degree plug cable support “3” designates solder mount receptacle (hermetic
“B” designates thru bulkhead receptacle (pressurized) only)
“I” designates solder mount receptacle (Hermetic only) “4” designates jam nut receptacle
3. Service Classes “6” designates straight plug
“A” designates general duty back shell 4. Service Class
“C” designates pressurized receptacle “E” designates environmental resisting connector
“E” designates environmental resisting open wire seal with grommet and nut “F” designates environmental resisting connectors
“J” designates clamp assembly for moisture proofing multi-jacketed cables, with strain relief
with strain relief “J” designates clamp assembly for moisture proofing
“P” designates assembly with potting boot multi-jacketed cables, with strain relief
W” designates clamp assembly for moisture proofing multi-jacketed cables “P” designates potted type with potting boot
“H” designates hermetic* without interfacial seal “H” designates hermetic
“Y” designates hermetic* with interfacial seal 5. Shell Size
4. Shell Size “20” designates shell size. Shell sizes 8 through 24
“20” designates shell size. Shell sizes 6 through 24 available. available.
5. Insert Arrangement - Refer to pages 4-11 for insert availability. 6. Insert Arrangement - Refer to pages 4-11 for insert
“20 - 41” designates insert arrangement. (The number following the hyphen is availability.
the number only that is used in the part number). “20 - 41” designates arrangement. (The number fol-
6. Contacts lowing the hyphen is the number only that is used in
“P” designates pin contacts the part number).
“S” designates socket contacts Hermetic version
For ordering connectors with printed circuit board contacts, see pg. 20. “20Y41” designates insert arrangement; specify “Y”
7. Insert Rotation - Refer to page 7. for flat eyelet pin contacts, or “C” for solder cup pin
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal position. contacts
No letter required for normal (no rotation) position. 7. Contact Configuration
8. “SR” designates a strain relief clamp. “P” designates pin contacts
Indicate optional finishes as follows: “S” designates socket contacts
(003) olive drab cadmium plate (standard on “PT”) 8. Insert Rotation- Refer to page 7.
(005) anodic coating - Alumilite® (standard on “SP”) “W”, “X”, “Y”, “Z” designate that insert is rotated in it
(014) olive drab cadmium plate over nickel shell from “normal” position. No letter require fo nor-
(023) electroless nickel mal (no rotation) position.
(024) olive drab zinc cobalt plating
(424) electroless nickel finish with strain relief
(466) olive drab zinc cobalt plating with strain relief * Hermetic connectors are supplied with tin plated shells.
(100) Suffix added for flat eyelet pin contacts in hermetic versions ** This connector style is sometimes referred to as a cable connect-
OR Amphenol ing “plug”. It does, however, mate with either a straight or 90
RoHS Compliant finish suffix as follow: RoHS degree plug.
(025) non-conductive black zinc cobalt plating
(027) conductive black zinc cobalt plating For ordering Miniature Breakaway PT Solder connec-
EU / 2002 / 95 / EC
(470) non-conductive black zinc cobalt plating tors see pg. 26.
with strain relief 27
(476) conductive black zinc cobalt plating with strain relief
Amphenol ® PT-SE, SP-SE, MS/PT-SE
Proprietary/MIL-C-26482, Series 1
bayonet coupling and crimp termination
Amphenol® SE crimp type miniature connectors provide
performance and versatility needed for applications
demanding high reliability and crimp removable contacts.
These crimp contacts are rear insertable/front release and
are held in position by an MS approved spring tower reten-
tion system.
wall mounting
receptacle The MS/PT-SE Series is qualified to MIL-C-26482, Series 1 and
has all the outstanding design characteristics and quality of the
PT Series.
The SP-SE Series is a modification of the PT-SE, providing
special shells with a wide mounting flange for back panel
mounting.
cable A corrosion resistant electrically conductive finish of cadmium
connecting plate with an olive drab chromate after-treatment is used on the
receptacle* PT-SE and MS/PT-SE. The SP-SE is given a durable non-con-
ductive hard anodic “Alumilite”® coating which provides abra-
sion protection and resistance to corrosion.
Shell components for these series are aluminum. The depend-
able 5 key/keyway polarization with bayonet lock coupling
assures positive mating with no chance of cross plugging.
box mounting Spring tension provided by a wave washer in the coupling nut
receptacle ensures maintenance of interfacial seal between mating halves.
Both the insert and main joint gasket are molded from resilient
neoprene. This provides excellent moisture sealing at the gas-
ket and superior electrical isolation of the contact in the insert.
Both pins and sockets are machined from a copper alloy and
are gold plated. This gold plating eliminates contact corrosion
straight plug and offers an indefinite shelf life. Socket contacts for these
series are a closed entry design.
Breakaway style plug is available in PT-SE crimp.
The PT-SE, SP-SE and MS/PT-SE Series are intermateable
and intermountable with all existing Miniature Cylindrical Series
connectors except for the threaded coupling PC Series.
jam nut
receptacle Refer to pages 4-11 for insert arrangement availability.
* This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
breakaway
twist pull
plug
28
PT-SE. SP-SE, MS/PT-SE
Contact Specifications
Maximum PT-SE, SP-SE, MS/PT-SE WITH CRIMP CONTACTS BAYONET COUPLING
Contact Test Millivolt Crimp Well Minimum
Size Current Drop† Diameter Well Depth
20 7.5 55 .049 ±.001 .267
16 13.0 49 .067 ±.001 .236
12 23.0 42 .100 ±.002 .236 “SE”,
Service Rating MS / “E”
Recommended Test Voltage AC (RMS), 60 cps open wire seal
Operating
Service AC Voltage Sea 50,000 70,000 110,000
Rating at Sea Level Level ft. ft. ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
† Silver plated wire per MIL-C-26482
PT-SE and SP-SE Service Classes
PT-SE and SP-SE connectors are available in the
three service classes listed below. “SE” (SR),
“SE” Open wire sealing - environmental resistant, MS / “F”
with a nut and grommet for moisture proof- strain relief
ing individual wires clamp
“SE” (SR)Strain relief clamp - environmental resistant
strain relief clamp and grommet for moisture
proofing individual wires; provides added
wire bundle support
“SP” Translucent nylon boot for retaining cus-
tomer applied potting compounds; held in
place by a threaded ring
Breakaway style - see page 38.
MS/PT-SE Service Classes “SP”,
MS-SE series connectors are available in the following MS / “P”
certified service classes: potting boot
“E” Open wire sealing - environmental resisting
connectors are supplied with a multi-hole
grommet and clamping nut for moisture
proofing individual open wires
“F” Environmental resistant strain relief clamp
and grommet for moisture proofing individual
wires; provides added wire bundle support
“P” Potting applications - these connectors are
supplied with a translucent nylon boot for
retention of customer applied potting com-
pound
29
PT00 SE (MS3120)
SP00 SE
wall mounting receptacle
S T Dia.
R 4 Holes
(TP)
(TRP)S
TERMINATION ASSEMBLIES
“SE” Open Wire Seal “SE” (SR), MS / “F” Strain Relief “SP” Potting Boot
L L L
M K
A N A G N A D N
M K M K
PT00SE-XX-XXX PT00SE-XX-XXX (SR) PT00SP-XX-XXX
SP00SE-XX-XXX SP00SE-XX-XXX (SR) SP00SP-XX-XXX
MS3120E-XX-XXX MS3120F-XX-XXX
To complete part number see how to order on page 39.
■ (MMC) located within .005 of (TP)
Receptacle Front View Receptacle Side View
M
R S T Dia. A Dia. +.010 P*
Shell (TP) Max. ± .005 +.001 K –.000 Max. Panel Thickness
Size PT SP PT SP PT SP –.005 ±.016 PT SP PT SP
8 .594 – .828 – .120 – .473 .062 .431 – .094 –
10 .719 .812 .954 1.141 .120 .150 .590 .062 .431 .462 .094 .125
12 .812 .938 1.047 1.266 .120 .150 .750 .062 .431 .462 .094 .125
14 .906 1.031 1.141 1.360 .120 .150 .875 .062 .431 .462 .094 .125
16 .969 1.125 1.234 1.453 .120 .150 1.000 .062 .431 .462 .094 .125
18 1.062 1.203 1.328 1.532 .120 .150 1.125 .062 .431 .462 .094 .125
20 1.156 1.297 1.453 1.688 .120 .150 1.250 .094 .556 .556 .219 .219
22 1.250 1.375 1.578 1.766 .120 .150 1.375 .094 .556 .556 .219 .219
24 1.375 1.500 1.703 1.891 .147 .150 1.500 .094 .589 .589 .219 .219
Class “SE”, MS / “E” Class “SE” (SR), MS / “F” Class “SP”, MS / “P”
Shell L N Dia. G L N D Dia. L N Dia.
Size Max. Max Dia. Max. Max. Max. Max. Max.
8 1.328 .560 .125 2.422 .781 – – –
10 1.328 .704 .188 2.422 .844 .444 1.656 .734
12 1.328 .825 .312 2.422 .969 .558 1.656 .858
14 1.328 .954 .375 2.422 1.094 .683 1.656 .984
16 1.328 1.080 .500 2.537 1.156 .808 1.656 1.110
18 1.328 1.204 .625 2.537 1.406 .909 1.656 1.234
20 1.359 1.330 .625 2.824 1.406 1.034 1.750 1.360
22 1.359 1.454 .750 2.824 1.594 1.159 1.750 1.484
24 1.422 1.580 .800 2.900 1.688 1.284 1.782 1.610
* Back panel mounting
All dimensions for reference only.
30
MF00 SE (MS3128)
wall mounting receptacle
T¹ Dia.
S 4 Holes
R¹
(TP)
R
(TP)
R R¹ S
(TP) (TP)
T Dia.
4 Holes
TERMINATION ASSEMBLIES
MS / “E” Open Wire Seal MS / “F” Strain Relief
L L
M K
A N A GF N
M K
MF00SE-XX-XXX MF00SE-XX-XXX (SR)
MS3128E-XX-XXX MS3128F-XX-XXX
To complete part number see how to order on page 39.
■ (MMC) located within .0025 of (TP)
Receptacle Front View Receptacle Side View
A Dia. M Class MS / “E” Class MS / “F”
Shell S T Dia. T1 Dia. +.001 K +.010 L N F G L N
Size R R1 Max. ±.005 ±.005 –.005 ±.016 –.000 Max. Max. Min. Dia. Max. Max.
10 .719 .812 1.141 .120 .150 .590 .062 .462 1.328 .685 .297 .188 1.906 .891
12 .812 .938 1.266 .120 .150 .750 .062 .462 1.328 .813 .422 .312 1.906 1.016
14 .906 1.031 1.360 .120 .150 .875 .062 .462 1.328 .930 .547 .375 1.906 1.141
16 .969 1.125 1.453 .120 .150 1.000 .062 .462 1.328 1.057 .609 .500 2.000 1.203
18 1.062 1.203 1.532 .120 .150 1.125 .062 .462 1.328 1.175 .734 .625 2.000 1.469
20 1.156 1.297 1.688 .120 .150 1.250 .094 .556 1.359 1.301 .734 .625 2.172 1.469
22 1.250 1.375 1.766 .120 .150 1.375 .094 .556 1.359 1.428 .922 .750 2.172 1.656
24 1.375 1.500 1.891 .147 .150 1.500 .094 .589 1.422 1.533 .984 .800 2.234 1.750
All dimensions for reference only.
31
PT01 SE (MS3121)
SP01 SE
cable connecting receptacle
S
S
TERMINATION ASSEMBLIES
“SE”, MS / “E” Open Wire Seal “SE” (SR), MS / “F” Strain Relief “SP”, MS / “P” Potting Boot
L L L
A N A G N A D N
K K K
PT01SE-XX-XXX PT01SE-XX-XXX (SR) PT01SP-XX-XXX
SP01SE-XX-XXX SP01SE-XX-XXX (SR) SP01SP-XX-XXX
MS3121E-XX-XXX MS3121F-XX-XXX MS3121P-XX-XXX
Note: This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 39.
Receptacle Receptacle
Front View Side View
Class “SE”, MS / “E” Class “SE” (SR), MS / “F” Class “SP”, MS / “P”
A Dia. N N
Shell S +.001 K L Dia. G L N D L Dia.
Size Max. –.005 ±.018 Max. Max. Dia. Max. Max. Dia. Max. Max.
8 .812 .473 .094 1.522 .560 .125 2.422 .828 – – –
10 .955 .590 .094 1.522 .685 .188 2.422 .891 .444 1.656 .734
12 1.048 .750 .094 1.522 .813 .312 2.422 1.016 .558 1.656 .858
14 1.142 .875 .094 1.522 .930 .375 2.422 1.141 .683 1.656 .984
16 1.236 1.000 .094 1.522 1.057 .500 2.537 1.203 .808 1.656 1.110
18 1.329 1.125 .094 1.522 1.175 .625 2.537 1.469 .909 1.656 1.234
20 1.455 1.250 .115 1.709 1.301 .625 2.824 1.469 1.034 1.750 1.360
22 1.579 1.375 .115 1.709 1.428 .750 2.824 1.656 1.159 1.750 1.484
24 1.709 1.500 .115 1.709 1.555 .800 2.900 1.750 1.284 1.782 1.610
All dimensions for reference only.
32
PT02 SE (MS3122)
SP02 SE
box mounting receptacle
S L
R M
(TP)
K
R S A N
(TP)
T Dia. D
4 Holes
PT02SE-XX-XXX
SP02SE-XX-XXX
MS3122E-XX-XXX
To complete part number see how to order on page 39.
■ (MMC) located within .0025 of (TP)
Receptacle Front View Receptacle Side View
T A M N
S Dia. Dia. D +.010 Dia.
Shell R Max. ±.005 +.001 Max. K L –.000 +.011
Size PT SP PT SP PT SP –.005 PT SP ±.016 Max. PT SP –.000
8 .594 – .828 – .120 – .473 .312 – .062 1.296 .431 – .438
10 .719 .812 .954 1.141 .120 .150 .590 .312 .219 .062 1.296 .431 .462 .562
12 .812 .938 1.047 1.266 .120 .150 .750 .312 .219 .062 1.296 .431 .462 .688
14 .906 1.031 1.141 1.360 .120 .150 .875 .312 .219 .062 1.296 .431 .462 .812
16 .969 1.125 1.234 1.453 .120 .150 1.000 .312 .219 .062 1.296 .431 .462 .938
18 1.062 1.203 1.328 1.532 .120 .150 1.125 .312 .219 .062 1.296 .431 .462 1.062
20 1.156 1.297 1.453 1.688 .120 .150 1.250 .406 .344 .094 1.358 .556 .556 1.188
22 1.250 1.375 1.578 1.766 .120 .150 1.375 .406 .344 .094 1.358 .556 .556 1.312
24 1.375 1.500 1.703 1.891 .147 .150 1.500 .406 .344 .094 1.358 .589 .589 1.438
All dimensions for reference only.
33
MF02 SE (MS3127)
box mounting receptacle
T¹ Dia.
4 Holes
S L
R¹
(TP)
M
R
(TP) K
R R¹ S A N
(TP) (TP)
T Dia. D
4 Holes
MF02SE-XX-XXX
MS3127E-XX-XXX
To complete part number see how to order on page 39.
■ (MMC) located within .0025 of (TP)
Receptacle Front View Receptacle Side View
N A
Dia. Dia. M
Shell +.011 S T T1 +.001 D K L +.010
Size –.000 R R1 Max. ±.005 ±.005 –.005 Max. ±.016 Max. –.000
10 .562 .719 .812 1.141 .120 .150 .590 .219 .062 1.266 .462
12 .688 .812 .938 1.266 .120 .150 .750 .219 .062 1.266 .462
14 .812 .906 1.031 1.360 .120 .150 .875 .219 .062 1.266 .462
16 .938 .969 1.125 1.453 .120 .150 1.000 .219 .062 1.266 .462
18 1.062 1.062 1.203 1.532 .120 .150 1.125 .219 .062 1.266 .462
20 1.188 1.156 1.297 1.688 .120 .150 1.250 .344 .094 1.328 .556
22 1.312 1.250 1.375 1.766 .120 .150 1.375 .344 .094 1.328 .556
24 1.438 1.375 1.500 1.891 .147 .150 1.500 .344 .094 1.328 .589
All dimensions for reference only.
34
PT06 SE (MS3126)
SP06 SE
straight plug
S
TERMINATION ASSEMBLIES
“SE”, MS / “E” Open Wire Seal “SE” (SR), MS / “F” Strain Relief “SP”, MS / “P” Potting Boot
L L L
N G N DN
Z pin contacts Z pin contacts Z pin contacts
Z¹ socket contacts Z¹ socket contacts Z¹ socket contacts
PT06SE-XX-XXX PT06SE-XX-XXX (SR) PT06SP-XX-XXX
SP06SE-XX-XXX SP06SE-XX-XXX (SR) SP06SP-XX-XXX
PTG06SE-XX-XXX PTG06SE-XX-XXX (SR) PTG06SP-XX-XXX
MS3126E-XX-XXX MS3126F-XX-XXX MS3126P-XX-XXX
To complete part number see how to order on page 39.
Plug Plug
Front View Side View
Class “SE”, MS / “E” Class “SE” (SR), MS / “F” Class “SP”, MS / “P”
Shell S Dia. Z Z1 L N G L N D L N Dia.
Size Max. ±.045 ±.045 Max. Max. Dia. Max. Max. Dia. Max. Max.
8* .734 .640 .579 1.328 .540 .125 2.413 .828 .327 1.750 .578
10 .859 .640 .579 1.328 .685 .188 2.413 .891 .444 1.750 .734
12 1.031 .640 .579 1.328 .813 .312 2.413 1.016 .558 1.750 .858
14 1.156 .640 .579 1.328 .930 .375 2.413 1.141 .683 1.750 .984
16 1.281 .640 .579 1.328 1.057 .500 2.528 1.203 .808 1.750 1.110
18 1.391 .640 .579 1.328 1.175 .625 2.528 1.469 .909 1.750 1.234
20 1.531 .640 .579 1.297 1.301 .625 2.753 1.469 1.034 1.750 1.360
22 1.656 .640 .579 1.297 1.428 .750 2.753 1.656 1.159 1.750 1.484
24 1.777 .640 .579 1.359 1.533 .800 2.830 1.750 1.284 1.766 1.610
* PT-SE, MS-SE and MS-SP only.
All dimensions for reference only.
35
PT07 SE (MS3124)
SP07 SE
jam nut receptacle
S
H
S
TERMINATION ASSEMBLIES
“SE”, MS / “E” Open Wire Seal “SE” (SR), MS / “F” Strain Relief “SP”, MS / “P” Potting Boot
L L L
M M M
K K K
R
J A N J A F N JA G N
R R
P P P
PT07SE-XX-XXX PT07SE-XX-XXX (SR) PT07SP-XX-XXX
SP07SE-XX-XXX SP07SE-XX-XXX (SR) SP07SP-XX-XXX
MS3124E-XX-XXX MS3124F-XX-XXX MS3124P-XX-XXX
To complete part number see how to order on page 39.
All lockwire holes are .044 Dia. Min.
Receptacle Front
View Receptacle Side View
A Dia. J Flat K P R
Shell H Hex S +.001 +.000 +.011 M Panel Thickness Thread
Size Max. Max. –.005 –.010 –.010 ±.005 Min. Max. Class 2A
8 .767 .954 .473 .530 .125 .696 .062 .125 .5625-24 UNEF
10 .892 1.078 .590 .655 .125 .696 .062 .125 .6875-24 NEF
12 1.079 1.266 .750 .818 .125 .696 .062 .125 .8750-20 UNEF
14 1.205 1.391 .875 .942 .125 .696 .062 .125 1.0000-20 UNEF
16 1.329 1.516 1.000 1.066 .125 .696 .062 .125 1.1250-18 NEF
18 1.455 1.641 1.125 1.191 .125 .696 .062 .125 1.2500-18 NEF
20 1.579 1.828 1.250 1.316 .156 .884 .062 .250 1.3750-18 NEF
22 1.705 1.954 1.375 1.441 .156 .884 .062 .250 1.5000-18 NEF
24 1.829 2.078 1.500 1.566 .156 .917 .062 .250 1.6250-18 NEF
Class “SE”, MS / “E” Class “SE” (SR), MS / “F” Class “SP”, MS /”P”
Shell L N F G Dia. L N G L N Dia.
Size Max. Max. Min. Free Max. Max. Dia. Max. Max.
8 1.438 .749 .234 .125 1.922 .828 – – –
10 1.438 .874 .297 .188 1.922 .891 .444 1.656 .734
12 1.438 .999 .422 .312 1.922 1.016 .558 1.656 .858
14 1.438 1.124 .547 .375 1.922 1.141 .683 1.656 .984
16 1.438 1.249 .609 .500 2.000 1.203 .808 1.656 1.110
18 1.438 1.374 .734 .625 2.000 1.469 .909 1.656 1.234
20 1.625 1.530 .734 .625 2.172 1.469 1.034 1.922 1.360
22 1.625 1.655 .922 .750 2.172 1.656 1.159 1.922 1.484
24 1.688 1.780 .984 .800 2.234 1.750 1.284 1.951 1.610
All dimensions for reference only.
36
PT08 SE
SP08 SE
90 degree plug
G
TERMINATION ASSEMBLIES
“SE” Open Wire Seal, “SE” (SR) Strain Relief “SP” Potting Boot 75 degrees
L L
E
B A
PT08SE-XX-XXX PT08SP-XX-XXX H
SP08SE-XX-XXX SP08SP-XX-XXX
PT08SE-XX-XXX (SR)
SP08SE-XX-XXX (SR) D
K
C
To complete part number see how to order on page 39.
All lockwire holes are .044 Dia. Min.
Plug Plug
Front View Side View
Class “SE”, “SE” (SR) Class “SP”
G C E
Shell Dia. B +.010 D +.047 L A H K L
Size Max. ±.031 –.025 ±.062 –.025 Max. ±.025 ±.015 ±.015 Max.
10 .921 .749 .170 1.191 .393 2.137 .547 .438 .562 2.031
12 1.046 .812 .264 1.191 .450 2.222 .625 .516 .688 2.093
14 1.171 .905 .310 1.254 .519 2.370 .734 .625 .781 2.203
16 1.297 1.030 .330 1.316 .583 2.572 .750 .656 .890 2.250
18 1.422 1.015 .444 1.562 .621 2.680 .781 .703 1.000 2.296
20 1.562 1.077 .510 1.625 .683 2.753 .859 .766 1.125 2.343
22 1.672 1.139 .515 1.719 .739 2.799 .906 .812 1.234 2.390
24 1.797 1.250 .656 1.750 .787 3.037 1.181 .918 1.374 2.624
All dimensions for reference only.
37
PT-SE Breakaway
twist pull plug
The PT-SE miniature breakaway connector has the following 4.500 ±.250
design features: L
D J
• crimp front release, front removable contacts in “SE” spring SOCKET
tower retention system INSERT C
• 3 styles available: potted termination, environmental style PIN
and environment style with a strain relief INSERT
• instant decoupling of plug and receptacle with an axial
pull on the lanyard when they are fully mated B
• intermateable with standard receptacles
• operating voltage to 900 VAC (RMS) at sea level
• quick positive bayonet coupling and 5 key/keyway polarization
LANYARD PULLED TAUT A
AGAINST A .200 ±.031 DIA MANDREL
4.500 ±.250 5.000 ±.250 Breakaway PT-SE with Crimp Contacts,
L1 L2 Environmental
D J D J 71-3455XX-( )
SOCKET SOCKET 72-3455XX-( )
INSERT C INSERT C
PIN PIN
INSERT INSERT
H F
Breakaway PT-SE with Crimp Contacts, Breakaway PT-SE with Crimp Contacts,
Potted Termination Environmental with Strain Relief
71-4196XX-( ) 71-2511XX-( )
72-4196XX-( ) 72-2511XX-( )
Part Part Part Shell A Dia. B C +.020 D +.020 F Dia. H Dia. J L L1 L2
Number* Number* Number* Size Max. Max. –.000 –.000 ±.016 ±.016 ±.010 Max. Max. Max.
71-419646 71-251181 71-345510 10 1.125 1.125 .030 .337 .188 .444 .353 1.875 2.140 2.156
71-419647 71-251182 71-345512 12 1.281 1.406 .030 .337 .312 .558 .353 1.875 2.156 2.406
71-419648 71-251183 71-345514 14 1.438 1.562 .030 .337 .375 .683 .353 1.906 2.203 2.406
71-419649 71-251184 71-345516 16 1.562 1.688 .030 .337 .500 .808 .353 1.969 2.250 2.531
71-419650 71-251185 71-345518 18 1.718 1.844 .030 .337 .625 .909 .353 2.000 2.281 2.531
71-419651 71-251186 71-345520 20 1.875 2.000 .092 .399 .625 1.034 .415 2.281 2.359 2.719
71-419652 71-251187 71-345522 22 2.031 2.188 .092 .399 .750 1.159 .415 2.344 2.453 2.844
71-419653 71-251188 71-345524 24 2.156 2.312 .092 .399 .800 1.284 .415 2.406 2.453 2.906
All dimensions for reference only. Drawing above shows standard lanyard length.
* See Finish information below to determine prefix 71 or 72 in part number.
Order by Amphenol Propriety number as follows (example part number shown):
71 - 4196 50 - 32 P
1 2 3 4 5
1. Finish
“71” designates corrosion resistant olive drab cadmium plate
“72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hr.
extended salt spray.
2. Connector Type Identification
4196XX designates PT-SE plug, crimp, potted termination style
2511XX designates PT-SE plug, crimp, environmental with strain relief style
3455XX designates PT-SE plug, crimp, environmental
3. Shell Size
See part number columns in chart above for 2 digit number at end that correlates to the shell size. Example: ‘50’ correlates to shell size 18.
4. Insert Arrangement Number
See insert availability for Miniature Breakaway connectors on page 6. The number following the hyphen is the insert arrangement number.
5. Contact Type/Alternate Insert Rotation
P designates pin, S designates socket for normal positioning of inserts. When an Pin Contacts Socket Contacts
alternate position of the insert is required to prevent cross-mating a different letter Amphenol Equates to Amphenol Equates to
(other than P or S) is used. See page 7 for description of alternate positions; then con- Letter MS letter Letter MS letter
vert to Amphenol proprietary coding by the chart at right to complete the part number. G PW H SW
I PX J SX
38 K PY L SY
M PZ N SZ
PT-SE, SP-SE, MS/PT-SE
how to order
PT-SE, SP-SE MS/PT-SE
To more easily illustrate ordering procedure, part number PT00SE-20- MIL-C-26482, Series 1
41PW(SR) is shown as follows: To more easily illustrate ordering procedure, part number
PT 00 SE - 20 - 41 P W (SR) MS3120E20-41PW is shown as follows: PT-SE, SP-SE, MS/PT-SE HOW TO ORDER
1 2 3 4 5 6 7 8 MS 312 0 E 20 – 41 P W
See code below: 1 2 3 4 5 6 7 8
1. Connector Type See code below:
“PT” designates standard olive drab, electrically conductive cadmium 1. “MS” designates Military Standard
plated, bayonet lock connector with crimp contacts 2. Specification Number
“MF” designates standard olive drab, electrically conductive cadmium “312” designates basic family for MIL-C-26482, Series 1
plated, bayonet lock connector with dual mounting holes, and crimp type
crimp contacts 3. Shell Style
“SP” designates electrically non-conductive, hard anodic coated, “0” designates wall mounting receptacle
bayonet lock connector with larger flange and mounting holes “1” designates cable connecting receptacle*
for back panel mounting, and crimp contacts “2” designates box mounting receptacle
“PTG” designates plug with grounding fingers “4” designates jam nut receptacle
2. Shell Style “6” designates straight plug
“00” designates wall mounting receptacle “7” designates box mounting receptacle with dual
“01” designates cable connecting receptacle* mounting holes
“02” designates box mounting receptacle “8” designates wall mounting receptacle with dual
“06” designates straight plug mounting holes
“07” designates jam nut receptacle 4. Service Class
“08” designates 90 degree plug “E” designates environmental resisting connector
3. Service Classes “F” designates environmental resisting connector with
“SE” designates environmental crimp strain relief
“SP” designates potted type crimp “P” designates potted type with potting boot
Both of the above are Amphenol proprietary versions of the MIL-C- 5. Shell Size
26482, Series 1 crimp contact connector and offer 15 lbs. contact reten- “20” designates shell size. Shell sizes 8 through 24 available
tion for size 20 contacts; 25 lbs. for size 16 contacts.
4. Shell Size 6. Insert Arrangement
“20” designates shell size. Shell sizes 8 through 24 available. Refer to pages 4-11 for insert availability.
5. Insert Arrangement “20 - 41” designates insert arrangement. (The number follow-
Refer to pages 4-11 for insert availability. ing the hyphen is the number only that is used in the part
“20 - 41” designates insert arrangement. (The number following the number).
hyphen is the number only that is used in the part number). 7. Contacts
6. Contacts “P” designates pin contacts
“P” designates pin contacts “S” designates socket contacts
“S” designates socket contacts 8. Insert Rotation
7. Insert Rotation Refer to page 7.
Refer to page 7. “W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal” from the “normal” position. No letter required for normal (no
position. No letter required for normal (no rotation) position. rotation) position.
8. “SR” designates a strain relief clamp.
Indicate optional finishes as follows:
(003) olive drab cadmium plate (standard on “PT”) * This connector style is sometimes referred to as a cable connecting
(005) anodic coating - Alumilite® (standard on “SP”) “plug”. It does, however, mate with either a straight or 90 degree plug.
(014) olive drab cadmium plate over nickel
(023) electroless nickel
(024) olive drab zinc cobalt plating For ordering Miniature Breakaway PT-SE Crimp connectors
(424) electroless nickel finish with strain relief see pg. 38.
(466) olive drab zinc cobalt plating with strain relief
OR
RoHS Compliant finish suffix as follow:
(025) non-conductive black zinc cobalt plating Amphenol
(027) conductive black zinc cobalt plating RoHS
(470) non-conductive black zinc cobalt plating with
strain relief EU / 2002 / 95 / EC
(476) conductive black zinc cobalt with strain relief
39
Amphenol ® PT-CE, SP-CE
bayonet coupling, crimp termination
Amphenol® CE crimp type miniature connectors provide
performance and versatility needed for applications
demanding high reliability and crimp removable contacts.
These crimp contacts are rear insertable/front release and
are held in position by a nylon wafer retention system.
wall mounting The SP-CE Series is a modification of the PT-CE, providing
receptacle special shells with a wide mounting flange for back panel
mounting.
A corrosion resistant electrically conductive finish of cadmium
plate with an olive drab chromate after-treatment is used on the
PT-CE. The SP-CE is given a durable nonconductive hard
anodic “Alumilite”® coating which provides abrasion protection
cable and resistance to corrosion.
connecting Shell components for these versions are aluminum. The
receptacle* dependable 5 key/keyway polarization with bayonet lock cou-
pling assures positive mating with no chance of cross plugging.
Spring tension provided by a wave washer in the coupling nut
ensures maintenance of interfacial seal between mating halves.
Both the insert and main joint gasket are molded from resilient
neoprene. This provides excellent moisture sealing at the gas-
box mounting ket and superior electrical isolation of the contact in the insert.
receptacle Both pins and sockets are machined form a copper alloy and
are gold plated. This gold plating eliminates contact corrosion
and offers an indefinite shelf life. Socket contacts for these
series are a closed entry design.
Breakaway style plug is available in PT-CE crimp.
The PT-CE and SP-CE Series are intermateable and inter-
straight plug mountable with all existing Miniature Cylindrical Series connec-
tors except for the threaded coupling PC Series.
Refer to pages 4-11 for insert arrangement availability.
* This connector style is sometimes referred to as a cable connecting “plug.” It
does, however, mate with a straight or 90 degree plug.
jam nut
receptacle
breakaway
twist pull
plug
40
PT-CE, SP-CE
Contact Specifications
Maximum PT-CE, SP-CE WITH CRIMP CONTACTS BAYONET COUPLING
Contact Test Millivolt Crimp Well Minimum
Size Current Drop† Diameter Well Depth
20 7.5 55 .045 +.002 .359
–.001
16 13.0 49 .063 +.004 .234
–.001
“CE”
Service Rating open wire seal
Recommended Test Voltage AC (RMS), 60 cps
Operating
Service AC Voltage Sea 50,000 70,000 110,000
Rating at Sea Level Level ft. ft. ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
† Silver plated wire per MIL-C-26482
PT-CE, and SP-CE Service Classes
PT-CE and SP-CE Connectors are available in the “CE” (SR)
three service classes listed below. strain relief
“CE” Open wire sealing – environmental resistant,
with a nut and grommet for moisture proof-
ing individual wires.
“CE” (SR)Strain relief clamp – environmental resistant
strain relief clamp and grommet for moisture
proofing individual wires; provides added
wire bundle support.
“CP” Translucent nylon boot for retaining cus-
tomer applied potting compounds; held in
place by a threaded ring.
Breakaway style - see page 48.
“CP”
potting boot
41
PT00 CE
SP00 CE
wall mounting receptacle
S PT
R .120 ± .005 Dia.
(TP) (.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
(TRP)S 4 Holes
TERMINATION ASSEMBLIES
“CE” Open Wire Seal “CE” (SR) Strain Relief “CP” Potting Boot
L L L
K K K
A N A G H A DN
M M M
PT00CE-XX-XXX PT00CE-XX-XXX (SR) PT00CP-XX-XXX
SP00CE-XX-XXX SP00CE-XX-XXX (SR) SP00CP-XX-XXX
To complete part number see how to order on page 49.
■ (MMC) located within .005 Dia. of (TP)
Receptacle Front View Receptacle Side View
A K M Class “CE” Class “CE” (SR) Class “CP”
R S Dia. +.025 +.010 N N
Shell (TP) ±.016 +.001 –.010 –.000 L Dia. G H L D L Dia.
Size PT SP PT SP –.005 PT SP PT SP Max. Max. Dia. Max. Max. Dia. Max. Max.
6 .469 .641 .688 .953 .348 .493 .524 .431 .462 1.468 .440 – – – – – –
8 .594 .734 .812 1.047 .473 .493 .524 .431 .462 1.468 .560 .125 .797 2.031 .327 1.683 .608
10 .719 .812 .938 1.125 .590 .493 .524 .431 .462 1.468 .685 .188 .859 2.031 .444 1.683 .734
12 .812 .938 1.031 1.250 .750 .493 .524 .431 .462 1.468 .813 .312 .984 2.031 .558 1.683 .858
14 .906 1.031 1.125 1.344 .875 .493 .524 .431 .462 1.468 .930 .375 1.109 2.031 .683 1.683 .984
16 .969 1.125 1.219 1.438 1.000 .493 .524 .431 .462 1.468 1.057 .500 1.172 2.156 .808 1.683 1.110
18 1.062 1.203 1.312 1.516 1.125 .493 .524 .431 .462 1.468 1.175 .625 1.422 2.156 .909 1.683 1.234
20 1.156 1.297 1.438 1.672 1.250 .650 .650 .556 .556 1.562 1.301 .625 1.422 2.266 1.034 1.750 1.360
22 1.250 1.375 1.562 1.750 1.375 .650 .650 .556 .556 1.562 1.428 .750 1.609 2.266 1.159 1.750 1.484
24 1.375 1.500 1.688 1.875 1.500 .683 .683 .589 .589 1.625 1.555 .800 1.703 2.328 1.284 1.782 1.610
All dimensions for reference only.
42
PT01 CE
cable connecting receptacle
S
S
TERMINATION ASSEMBLIES
“CE” Open Wire Seal “CE” (SR) Strain Relief “CP” Potting Boot
L L L
A N A G H A D H
K K K
PT01CE-XX-XXX PT01CE-XX-XXX (SR) PT01CP-XX-XXX
SP01CE-XX-XXX SP01CE-XX-XXX (SR)
Note:This connector style is sometimes referred to as a cable connecting
“plug”. It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 49.
Receptacle Receptacle
Front View Side View
A Dia. Class “CE” Class “CE” (SR) Class “CP”
Shell S +.001 K L N G H L D Dia. L N Dia.
Size ±.016 –.005 ±.016 Max. Dia. Dia. Dia. Max. Min. Max. Max.
6 .688 .348 .094 1.468 .440 – – – – – –
8 .812 .473 .094 1.468 .560 .125 .797 1.982 .327 1.702 .608
10 .938 .590 .094 1.468 .685 .188 .859 1.982 .444 1.702 .734
12 1.031 .750 .094 1.468 .813 .312 .984 1.982 .558 1.702 .858
14 1.125 .875 .094 1.468 .930 .375 1.109 1.982 .683 1.702 .984
16 1.219 1.000 .094 1.468 1.057 .500 1.172 2.114 .808 1.702 1.110
18 1.312 1.125 .094 1.468 1.175 .625 1.422 2.114 .909 1.702 1.234
20 1.438 1.250 .115 1.562 1.301 .625 1.422 2.207 1.034 1.796 1.360
22 1.562 1.375 .115 1.562 1.428 .750 1.609 2.207 1.159 1.796 1.484
24 1.688 1.500 .115 1.625 1.555 .800 1.703 2.219 1.284 1.827 1.610
All dimensions for reference only.
43
PT02 CE
SP02 CE
box mounting receptacle
S L
R M
(TP)
R S A HN
(TP)
T Dia. D
4 Holes K
PT02CE-XX-XXX
SP02CE-XX-XXX
PT02CP-XX-XXX
SP02CP-XX-XXX
To complete part number see how to order on page 49.
■ (MMC) located within .005 of (TP)
Receptacle Front View Receptacle Side View
T A K M
S Dia. Dia H +.025 +.010 N
Shell R ±.016 ±.005 +.001 D Dia. –.010 L –.000 Dia.
Size PT SP PT SP PT SP –.005 PT SP Max. PT SP Max. PT SP Max.
8 .594 .734 .812 1.047 .120 .150 .473 .344 .312 .317 .493 .524 1.250 .431 .462 .449
10 .719 .812 .938 1.125 .120 .150 .590 .344 .312 .441 .493 .524 1.250 .431 .462 .573
12 .812 .938 1.031 1.250 .120 .150 .750 .344 .312 .566 .493 .524 1.250 .431 .462 .699
14 .906 1.031 1.125 1.344 .120 .150 .875 .344 .312 .683 .493 .524 1.250 .431 .462 .823
16 .969 1.125 1.219 1.438 .120 .150 1.000 .344 .312 .808 .493 .524 1.250 .431 .462 .949
18 1.062 1.203 1.312 1.516 .120 .150 1.125 .344 .312 .899 .493 .524 1.250 .431 .462 1.073
20 1.156 1.297 1.438 1.672 .120 .150 1.250 .406 .406 1.034 .650 .650 1.312 .556 .556 1.199
22 1.250 1.375 1.562 1.750 .120 .150 1.375 .406 .406 1.155 .650 .650 1.312 .556 .556 1.323
24 1.375 1.500 1.688 1.875 .147 .150 1.500 .436 .436 1.279 .683 .683 1.312 .589 .589 1.449
All dimensions for reference only.
44
PT06 CE
SP06 CE
straight plug
S
TERMINATION ASSEMBLIES
“CE” Open Wire Seal “CE” (SR) Strain Relief “CP” Potting Boot
L L L
N G N DN
Z pin contacts Z pin contacts Z pin contacts
Z¹ socket contacts Z¹ socket contacts Z¹ socket contacts
PT06CE-XX-XXX PT06CE-XX-XXX (SR) PT06CP-XX-XXX
SP06CE-XX-XXX SP06CE-XX-XXX (SR) SP06CP-XX-XXX
To complete part number see how to order on page 49.
Plug Plug
Front View Side View
S Z Z1 Class “CE” Class “CE” (SR) Class “CP”
Shell Dia. +.035 +.035 L N G H L D L N Dia.
Size Max. –.040 –.040 Max. Dia. Dia. Max. Max. Dia. Max. Max.
6 .609 .772 .631 1.457 .440 – – – – – –
8 .734 .772 .631 1.457 .560 .125 .797 2.019 .327 1.707 .608
10 .844 .772 .631 1.457 .685 .188 .859 2.019 .444 1.707 .734
12 1.016 .772 .631 1.457 .813 .312 .984 2.019 .558 1.707 .858
14 1.141 .772 .631 1.457 .930 .375 1.109 2.019 .683 1.707 .984
16 1.266 .772 .631 1.457 1.057 .500 1.172 2.144 .808 1.707 1.110
18 1.375 .772 .631 1.457 1.175 .625 1.422 2.144 .909 1.707 1.234
20 1.516 .710 .569 1.487 1.301 .625 1.422 2.175 1.034 1.707 1.360
22 1.641 .710 .569 1.487 1.428 .750 1.609 2.175 1.159 1.707 1.484
24 1.761 .710 .569 1.550 1.555 .800 1.703 2.237 1.284 1.832 1.610
All dimensions for reference only.
45
PT07 CE
SP07 CE
jam nut receptacle
S
H
S
TERMINATION ASSEMBLIES
“CE” Open Wire Seal “CE” (SR) Strain Relief “CP” Potting Boot
M L M L M L
R K R K K
R
J A N JA G N JA DN
P P P
PT07CE-XX-XXX PT07CE-XX-XXX (SR) PT07CP-XX-XX
SP07CE-XX-XXX SP07CE-XX-XXX (SR) SP07CP-XX-XXX
To complete part number see how to order on page 49.
All lockwire holes are .044 Dia. Min.
Receptacle Receptacle
Front View Side View
H A J Panel Thickness Class “CE” Class “CE” (SR) Class “CP”
Hex. Dia. Flat D N
Shell +.017 S +.001 +.000 K M L N G L N Dia. L Dia.
Size –.016 ±.016 –.005 –.010 ±.016 ±.005 Min. Max. Max. Max. Dia. Max. Max. Min. Max. Max.
8 .750 .938 .473 .530 .125 .696 .062 .125 .827 .730 .125 1.297 .797 .327 .875 .608
10 .875 1.062 .590 .655 .125 .696 .062 .125 .827 .855 .188 1.297 .859 .444 .875 .734
12 1.062 1.250 .750 .818 .125 .696 .062 .125 .827 .980 .312 1.297 .984 .558 .875 .858
14 1.188 1.375 .875 .942 .125 .696 .062 .125 .827 1.105 .375 1.297 1.109 .683 .875 .984
16 1.312 1.500 1.000 1.066 .125 .696 .062 .125 .827 1.230 .500 1.422 1.172 .808 .875 1.110
18 1.438 1.625 1.125 1.191 .125 .696 .062 .125 .827 1.355 .625 1.422 1.422 .909 .875 1.234
20 1.562 1.812 1.250 1.316 .156 .884 .062 .250 .733 1.511 .625 1.328 1.422 1.034 .969 1.360
22 1.688 1.938 1.375 1.441 .156 .884 .062 .250 .733 1.636 .750 1.328 1.609 1.159 .969 1.484
24 1.812 2.062 1.500 1.566 .156 .917 .062 .250 .762 1.761 .800 1.422 1.703 1.284 .969 1.610
All dimensions for reference only.
46
PT08 CE
SP08 CE
90 degree plug
G
TERMINATION ASSEMBLIES
“CE” Open Wire Seal, “CE” (SR) Strain Relief “CP” Potting Boot 75 °
L L
E
B A
PT08CE-XX-XXX PT08CP-XX-XXX H
SP08CE-XX-XXX SP08CP-XX-XXX
PT08CE-XX-XXX (SR) D
SP08CE-XX-XXX (SR) K
C
To complete part number see how to order on page 49.
All lockwire holes are .044 Dia. Min.
Plug Plug
Front View Side View
Class “CE”, “CE” (SR) Class “CP”
G C E
Shell Dia. B +.010 D +.047 L A H K L
Size Max. ±.031 –.025 ±.062 –.025 ±.057 ±.025 ±.015 ±.015 Max.
8 .796 .655 .169 .941 .339 1.986 .469 .312 .438 1.906
10 .921 .749 .170 1.191 .393 2.080 .547 .438 .562 2.031
12 1.046 .812 .264 1.191 .450 2.165 .625 .516 .688 2.093
14 1.171 .905 .310 1.254 .519 2.313 .734 .625 .781 2.203
16 1.297 1.030 .330 1.316 .583 2.515 .750 .656 .890 2.250
18 1.422 1.015 .444 1.562 .621 2.623 .781 .703 1.000 2.296
20 1.562 1.077 .510 1.625 .683 2.739 .859 .766 1.125 2.343
22 1.672 1.139 .515 1.719 .739 2.785 .906 .812 1.234 2.390
24 1.797 1.265 .656 1.751 .797 3.024 1.169 .918 1.374 2.624
All dimensions for reference only.
47
PT-CE Breakaway
twist pull plug
The PT-CE miniature breakaway connector has the 6.000 ± .250
following design features: L
• crimp front release, front removable contacts in .016 +.010 J
“CE” nylon wafer retention system –.025
SOCKET INSERT +.010
• 2 styles available: potted termination and environ- .328 –.025
ment style with a strain relief PIN INSERT
• instant decoupling of plug and receptacle with an
axial pull on the lanyard when they are fully H B
mated
• intermateable with standard receptacles
• operating voltage to 900 VAC (RMS) at sea level
• quick positive bayonet coupling and 5 key/key- LANYARD PULLED TAUT A
way polarization AGAINST A .200 ± .031 DIA. MANDREL
Breakaway PT-CE with Crimp Contacts,
Potted Termination
71-2512XX-( )
72-2512XX-( )
6.000 ± .250
L1
A F H .016 +.010 J
Part Part Shell Dia. B Dia. Dia. J L L1 –.025
SOCKET INSERT
Number* Number* Size Max. Max. ±.016 ±.016 ±.010 Max. Max. .328
71-251209 71-339508 8 .875 .984 .125 .327 .353 1.937 2.937 +.010
–.025
71-251210 71-339510 10 1.125 1.125 .188 .444 .353 1.890 2.937 PIN
INSERT
71-251211 71-339512 12 1.281 1.406 .312 .558 .353 1.906 3.000 F
71-251212 71-339514 14 1.438 1.562 .375 .683 .353 1.953 3.000
71-251213 71-339516 16 1.562 1.688 .500 .808 .353 2.000 3.187
71-251214 71-339518 18 1.718 1.844 .625 .909 .353 2.031 3.375
71-251215 71-339520 20 1.875 2.000 .625 1.034 .415 2.234 3.375 Breakaway PT-CE with Crimp Contacts,
71-251216 71-339522 22 2.031 2.188 .750 1.159 .415 2.328 3.375 Environmental with Strain Relief
71-251217 71-339524 24 2.156 2.312 .800 1.284 .415 2.359 3.625 71-3395XX-( )
All dimensions for reference only. 72-3395XX-( )
* See Finish information below to determine prefix 71 or 72 in part number.
Drawing above shows standard lanyard length.
Order by Amphenol Propriety number as follows (example part number shown):
71 - 2512 50 - 32 P
1 2 3 4 5
1. Finish
“71” designates corrosion resistant olive drab cadmium plate
“72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hr.
extended salt spray.
2. Connector Type Identification
2512XX designates PT-CE plug, crimp, potted termination style
3395XX designates PT-CE plug, crimp, environmental with strain relief style
3. Shell Size
See part number columns in chart above for 2 digit number at end that correlates to the shell size. Example: ‘50’ correlates to shell size 18.
4. Insert Arrangement Number
See insert availability for Miniature Breakaway connectors on page 6. The number Pin Contacts Socket Contacts
following the hyphen is the insert arrangement number. Amphenol Equates to Amphenol Equates to
5. Contact Type/Alternate Insert Rotation Letter MS letter Letter MS letter
P designates pin, S designates socket for normal positioning of inserts. When an G PW H SW
alternate position of the insert is required to prevent cross-mating a different letter I PX J SX
(other than P or S) is used. See page 7 for description of alternate positions; then K PY L SY
convert to Amphenol proprietary coding by the chart at right to complete the part M PZ N SZ
number.
48
PT-CE, SP-CE
how to order
PT-CE, SP-CE
To more easily illustrate ordering procedure, part number
PT00CE-20-41PW (SR) is shown as follows:
PT 00 CE – 20 – 41 P W (SR) PT-CE, SP-CE HOW TO ORDER
1 2 3 4 5 6 7 8
See code below:
1. Connector Type
“PT” designates standard electrically conductive olive drab cadmium plated
bayonet lock connector with crimp contacts
“SP” designates electrically non-conductive, hard anodic coated bayonet
lock connector with large flange and mounting holes for back panel mount-
ing, and crimp contacts.
2. Shell Style
“00” designates wall mounting receptacle
“01” designates cable connecting receptacle*
“02” designates box mounting receptacle
“06” designates straight plug
“07” designates jam nut receptacle
“08” designates 90° plug
3. Service Class
“CE” designates environmental crimp
“CP” designates potted type crimp
Both of the above are Amphenol ® proprietary versions of the MIL-C-
26482, Series 1 crimp contact connector and offer 7 lbs. contact retention
for size 20 contacts; 9 lbs for size 16 contacts.
4. Shell Size
“20” designates shell size. Shell sizes 6 through 24 available.
5. Insert Arrangement
Refer to pages 4-11 for insert availability.
“20 – 41” designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
6. Contacts
“P” designates pin contacts.
“S” designates socket contacts.
7. Insert Rotation
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-
mal” position. No letter required for normal (no rotation) position.
8. “(SR)” designates strain relief clamp.
Indicate optional finishes as follows:
(003) olive drab cadmium plate (standard on “PT”)
(005) anodic coating - Alumilite® (standard on “SP”)
(014) olive drab cadmium plate over nickel
(023) electroless nickel
(024) olive drab zinc cobalt plating
(025) non-conductive black zinc cobalt plating
(027) conductive black zinc cobalt plating
(424) electroless nickel finish with strain relief
(466) olive drab zinc cobalt plating with strain relief
(470) non-conductive black zinc cobalt plating with strain relief
(476) conductive black zinc cobalt with strain relief
* This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
For ordering Miniature Breakaway PT-CE Crimp connectors see page 48.
49
Amphenol ® PC
threaded coupling and solder termination
Amphenol® PC Series threaded coupling miniature cylin-
drical connectors incorporate solder contacts. The PC dou-
ble stub threaded coupling system cannot be cross
threaded, and is mechanically assisted while engaging and
disengaging.
wall mounting Shell components are aluminum. Bright cadmium plating to
receptacle QQ-P-416 with a clear chromate after-treatment provides a
golden colored conductive finish. Single key/keyway polariza-
tion represents maximum simplicity in a design proven in mil-
lions of AN connectors.
Both pins and sockets are machined from a copper alloy and
are gold plated. This gold plating eliminates contact corrosion
and offers an indefinite shelf life. Socket contacts for these
series are a closed entry design.
cable Both the insert and main joint gasket are molded from resilient
connecting neoprene. This provides excellent moisture sealing at the gas-
receptacle* ket and superior electrical insulation of the contacts in the
insert.
The PC is intermateable and intermountable within the PC
threaded coupling series.
box mounting Refer to pages 4-11 for insert arrangement availability.
receptacle
* This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
PC-SE and PC-CE, which are threaded coupling and incorporate crimp
contacts, are briefly covered on pages 62 and 63. It is necessary to
contact Amphenol for ordering information on these types.
straight plug
jam nut
receptacle
50
PC
Contact Specifications
Maximum
Contact Test Millivolt Solder Well Solder
Size Current Drop†