P13
www.vishay.com Vishay Sfernice
Fully Sealed Container Cermet Potentiometer
Professional Grade
FEATURES
• High power rating 1.5 W at 70 °C
• Product qualification:
According to CECC 41 301-001 (A, B, C)
• Test according to CECC 41000 or IEC 60393-1
• GAM T1
Their excellent performances are due to the use of a • Cermet element
cermet-track sealed in a large case. • Fully sealed case
P13 interchangeability with RV6, combined with the • Tight temperature coefficient (± 75 ppm/°C typical)
excellent stability of its rated characteristics make it fully
acceptable for military and professional uses. • Mechanical strength
QUICK REFERENCE DATA • Material categorization: for definitions of compliance
Multiple module No please see www.vishay.com/doc?99912
Switch module n/a
Detent module n/a
Special electrical laws A: linear, L: logarithmic, F: reverse
logarithmic
Sealing level IP 67
Lifespan 25K cycles
DIMENSIONS in millimeters (± 0.5)
P13T-(PC32) A
10 wrench Panel Cutout
0.7 Ø 2.2
10.5 max. 8 Thread M6 x 0.75 1.6
Slot 0.6 x 1 deep b
Ø 12.6 Ø3 0.3 2 5.08 5.9 ± 0.2
c a
AA = 9.5 5.08
5 AB = 12.5 1.6 Ø 6.5
0.8
AJ = 22 2.4
P13Q-B
10 wrench Panel Cutout
0.7
10.5 max. 8 Thread M7 x 0.75
1.6 Ø 2.2
Slot 0.8 x 1.4 deep b
Ø 12.6 Ø4 0.3 2 5.08
c a 5.9 ± 0.2
EA = 9.5 5.08
5 EB = 12.5 1.6
0.8 Ø 7.5
EJ = 22 2.4
P13L-(PC33) C
Thread M10 x 0.75 Panel Cutout
10.5 max. 12 1.6
Slot 1 x 1.8 deep b
Ø 14 Ø6 0.3 2 5.08
c a
FG = 16 5.08
5 1.6 Ø 10.5
FL = 25 0.8
FR = 50 2.4
Revision: 04-Jul-17 1 Document Number: 51034
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P13
www.vishay.com Vishay Sfernice
ELECTRICAL SPECIFICATIONS
Resistive element Cermet
Electrical travel 270° ± 10°
linear taper 22 Ω to 10 MΩ
Resistance range
logarithmic taper 1 kΩ to 2.2 MΩ
Standard series e3 1, 2.2, 4.7 and on request 1, 2, 5
standard ± 20 %
Tolerance
on request ± 10 % to ± 5 %
100
% TOTAL RESISTANCE 80 F
60 A
Taper L
40
20
0 0 20 40 60 80 100
% CLOCKWISE SHAFT ROTATION
a c
Circuit diagram (1) (3)
b cw
(2)
1.5
LIN. TAPER A
Linear POWER IN W 1
1.5 W at 70 °C
Power rating LOG. TAPER
Logarithmic 0.5 L and F
0.75 W at 70 °C
0
0 20 40 60 70 80 100 120 140
AMBIENT TEMPERATURE IN °C
± 150 ppm/°C
Temperature coefficient (typical) For values ≥ 100 Ω and in temperature range +20 °C to +70 °C,
the typical temperature coefficient is ± 75 ppm/°C
Limiting element voltage (linear law) 350 V
Contact resistance variation 3 % Rn or 3 Ω
End resistance (typical) 1Ω
Dielectric strength (RMS) 2000 V
Insulation resistance (300 VDC) 106 MΩ
Independent linearity (typical) ±5%
Revision: 04-Jul-17 2 Document Number: 51034
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P13
www.vishay.com Vishay Sfernice
STANDARD RESISTANCE ELEMENT DATA
STANDARD LINEAR TAPER LOG. TAPER TYPICAL
RESISTANCE MAX. MAX. MAX. CUR. MAX. MAX. MAX. CUR. TCR
VALUES POWER WORKING THROUGH POWER WORKING THROUGH -55 °C
AT 70 °C VOLTAGE WIPER AT 70 °C VOLTAGE WIPER +125 °C
Ω W V mA W V mA ppm/°C
22 1.5 5.74 261
47 1.5 8.4 177
100 1.5 12.2 122
220 1.5 18.2 82.6
470 1.5 26.5 56.5
1K 1.5 38.7 38.7 0.75 27 27
2.2K 1.5 57.5 26.1 0.75 40 18
4.7K 1.5 84 17.9 0.75 59 12
10K 1.5 122.5 12.2 0.75 87 8.7 ± 150
22K 1.5 182 8.26 0.75 128 5.8
47K 1.5 265 5.65 0.75 187 3.9
100K 1.22 350 3.5 0.75 273 2.7
220K 0.56 350 1.6 0.56 350 1.6
470K 0.26 350 0.74 0.26 350 0.74
1M 0.12 350 0.35 0.12 350 0.35
2.2M 0.05 350 0.16 0.05 350 0.16
4.7M 0.026 350 0.074
10M 0.012 350 0.035
MECHANICAL SPECIFICATIONS
Mechanical travel 300° ± 5°
Operating torque (typical) 2 Ncm 2.85 oz. inch
End stop torque
style T, Q 35 Ncm max. 3.1 lb inch max.
style L 80 Ncm max. 7.1 lb inch max.
Tightening torque of mounting nut
style T, Q 150 Ncm max. 13.3 lb inch max.
style L 250 Ncm max. 22.1 lb inch max.
Unit weight 6 g to 18 g 0.22 oz. to 0.64 oz.
Terminals e3: pure Sn
ENVIRONMENTAL SPECIFICATIONS
Temperature range -55 °C to +125 °C
Climatic category 55 / 125 / 56
Sealing Fully sealed - container IP67
Revision: 04-Jul-17 3 Document Number: 51034
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P13
www.vishay.com Vishay Sfernice
OPTIONS
Length is measured from the mounting surface to the free end of the shaft. The screwdriver slot is
Special feature command shaft aligned with the wiper within ± 10°. Special shafts are available, in accordance to drawings supplied
by customers. We recommend that customers should not machine tool shafts, in order to avoid
damage. Bending or torsion of terminals should also be avoided.
Potentiometers P13T and P13L can be fitted with a device providing sealing between the threaded
bushing and the front panel. Their designation is P13P and P13N respectively or with a locating peg
P13P...E and P13N...E.
Panel sealed version
P13P
P13P...E: Including locating peg
0.7 Panel Cutout
13.2 max. 8 Thread M6 x 0.75
1.6
Slot 0.6 x 1 deep Ø 1.5
Ø 12.6 Ø3 0.3 2 5.08 3.9 ± 0.2
AA = 9.5 5.08 Ø 6.5
5 AB = 12.5 1.6
0.8
AJ = 22 2.4
Panel sealing
Panel sealed version
P13N
P13N...E: Including locating peg
Thread M10 x 0.75 Panel Cutout
13.5 max. 9.5 1.6
Slot 1 x 1.8 deep 0.3 Ø 1.5
Ø 16 Ø 14 Ø6 2 5.08 6.9 ± 0.2
FE = 13.5 5.08
5 1.6
FK = 22.5 Ø 10.5
0.8
FQ = 47.5
2.4
On potentiometers equipped with a 3 mm Ø shaft, shaft locking can be obtained:
• Either by a taper nut tightening a slotted bushing. Ask for P13O type. These devices are normally
equipped with an AB type shaft (12.5 mm with a slot).
P13O
10 wrench
0.7 Slotted bushing
Thread M6 x 0.75
8 wrench
Ø3
11
AB = 12.5
Shaft locking • Or by a tightening nut locked by a screw. Ask for ES1 type. On potentiometers equipped with a
Ø 6 mm shaft, locking can be obtained by a taper nut applying pressure on a slotted notched washer.
This device is supplied in a box as an accessory. Ask for DBAN.
These devices are ordered separately. Please consult Vishay Sfernice.
P13L DBAN
12 wrench
6.5
No locking on shaft Ø 4 mm.
Revision: 04-Jul-17 4 Document Number: 51034
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P13
www.vishay.com Vishay Sfernice
OPTIONS
Product in conformity with RN6/MIL-R-94/3G
P13T-F55
45° 18.5 max. 1.1
1/4 x 32 NEF 2A
Ø 6.35 x 32
threads per inch
RV6 2 ± 0.1
(P13T-F55) Ø 12.6
± 0.1
Ø 3.17 ± 0.03
6.3 ± 0.4
6.3 ± 0.1 13.5 max.
MARKING
Printed:
• Vishay trademark
• Part number (including ohmic value code, tolerance code and taper)
• Manufacturing date
• Marking of terminals a
PACKAGING
• In box
PERFORMANCE
REQUIREMENTS TYPICAL VALUES AND DRIFTS
TESTS CONDITIONS ΔRT/RT ΔR1-2/R1-2 OTHER ΔRT/RT ΔR1-2/R1-2 OTHER
(%) (%) (%) (%)
Electrical 1000 h at rated power ± 10 % - Contact res. variation: ±1% - Contact res. variation:
endurance 90’/30’ - ambient temp. 70 °C < 7 % Rn < 3 % Rn
Phase A dry heat 125 °C
Climatic Phase B damp heat ± 10 % ± 10 % - ± 0.5 % ±1% -
sequence Phase C cold -55 °C
Phase D damp heat 5 cycles
Dielectric strength: Dielectric strength:
Damp heat, 56 days ± 10 % ± 10 % 250 V ± 0.5 % ±1% 1000 V
steady state 40 °C, 93 % HR Insulation resistance: Insulation resistance:
> 100 MΩ > 104 MΩ
Change of 5 cycles ±3% - - ± 0.5 % - -
temperature -55 °C at +125 °C
Mechanical 25 000 cycles ± 10 % - Contact res. variation: ±3% - Contact res. variation:
endurance < 7 % Rn < 2 % Rn
50 g‘s at 11 ms
Shock 3 successive shocks ±2% - - ± 0.1 % ± 0.2 % -
in 3 directions
10 Hz to 55 Hz
Vibration 0.75 mm or 10 g‘s ±2% - - ± 0.1 % - ΔV1-2/V1-3 < ± 0.2 %
during 6 h
Note
• Nothing stated herein shall be construed as a guarantee of quality or durability
Revision: 04-Jul-17 5 Document Number: 51034
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P13
www.vishay.com Vishay Sfernice
ORDERING INFORMATION (part number)
P 1 3 P A B 1 0 3 M L B 1 7 E
MODEL BUSHING SHAFT OHMIC TOLERANCE TAPER PACKAGING SPECIAL
VALUE
P13 Ø L Old Only Old Linear law M = 20 % A = linear Bushing L or N: E=
codes Ø L with Shaft from 22 Ω On request: L = clockwise shaft < 45 mm locating peg
T 6 8 T bushing codes to 10 MΩ K = 10 % logarithmic B10 = or
Q 7 8 Q AA 3 9.5 T, P K Logarithmic F = inverse box of 10 pieces special
law from clockwise shaft > 45 mm code given
L 10 12 V AB 3 12.5 T, P, O L, M 1 kΩ to logarithmic B08 = by Vishay
O 6 11 H AJ 3 22 T, P R 2.2. MΩ box of 8 pieces
P 6 8 TP EA 4 9.5 Q E 103 = 10 kΩ Other bushings:
N 10 9.5 VP EB 4 12.5 Q F shaft < 20 mm
EJ 4 22 Q G B17 =
FG 6 16 L AC box of 25 pieces
shaft > 20 mm
FL 6 25 L AM B12 =
FR 6 50 L AL box of 15 pieces
FE 6 13 N AC
FK 6 22 N AM
FQ 6 47.5 N AL
PART NUMBER DESCRIPTION (for information only)
P13 T PE M 10K 20 % L BO e3
MODEL BUSHING SPECIAL SHAFT OHMIC TOL. TAPER SPECIAL PACKAGING SPECIAL SHAFT SPECIAL LEAD
VALUE (Pb)-FREE
RELATED DOCUMENTS
APPLICATION NOTES
Potentiometers and Trimmers www.vishay.com/doc?51001
Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029
Revision: 04-Jul-17 6 Document Number: 51034
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17 1 Document Number: 91000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
P13QEJ222MAB12 P13LFL103KAB10 P13TAJ103MLB12 P13NFK222MAB10E P13LFG102MAB10
P13QEJ103MLB12 P13QEB472MAB17 P13QEB502MAB17 P13TAA102MAB17 P13LFR472MAB08
P13TAB103MAB17