http://www.ncepower.com Pb Free Product
NCE0106Z
NCE N-Channel Enhancement Mode Power MOSFET
Description D
G
The NCE0106Z uses advanced trench technology and
design to provide excellent RDS(ON) with low gate charge. It S
can be used in a wide variety of applications. Schematic diagram
General Features
VDS = 100V,ID = 6A
RDS(ON) < 140m @ VGS=10V (Typ:110m)
High density cell design for ultra low Rdson
Fully characterized avalanche voltage and current
Excellent package for good heat dissipation
Application
Power switching application
Hard switched and high frequency circuits
Uninterruptible power supply
TO-92 view
Package Marking and Ordering Information
Device Marking Device Device Package Reel Size Tape width Quantity
- - -
0106Z NCE0106Z TO-92
Absolute Maximum Ratings (TA=25unless otherwise noted)
Parameter Symbol Limit Unit
Drain-Source Voltage VDS 100 V
20 V
Gate-Source Voltage VGS A
6 A
Drain Current-Continuous ID 24 W
3
Drain Current-Pulsed (Note 1) IDM -55 To 150
Maximum Power Dissipation PD
Operating Junction and Storage Temperature Range TJ,TSTG
Thermal Characteristic
Thermal Resistance,Junction-to-Ambient (Note 2) RJA 41.7 /W
Electrical Characteristics (TA=25unless otherwise noted)
Parameter Symbol Condition Min Typ Max Unit
Off Characteristics
Drain-Source Breakdown Voltage BVDSS VGS=0V ID=250A 100 110 - V
Zero Gate Voltage Drain Current IDSS VDS=100V,VGS=0V - - 1 A
Wuxi NCE Power Semiconductor Co., Ltd Page 1 v1.0
http://www.ncepower.com Pb Free Product
NCE0106Z
Gate-Body Leakage Current IGSS VGS=20V,VDS=0V - - 100 nA
On Characteristics (Note 3)
Gate Threshold Voltage VGS(th) VDS=VGS,ID=250A 1.2 1.8 2.5 V
Drain-Source On-State Resistance RDS(ON) VGS=10V, ID=5A
Forward Transconductance VDS=5V,ID=2.9A - 110 140 m
Dynamic Characteristics (Note4) gFS
Input Capacitance - 8 - S
Output Capacitance Clss
Reverse Transfer Capacitance Coss VDS=25V,VGS=0V, - 690 - PF
Switching Characteristics (Note 4) Crss F=1.0MHz
Turn-on Delay Time - 120 - PF
Turn-on Rise Time td(on)
Turn-Off Delay Time tr - 90 - PF
Turn-Off Fall Time
Total Gate Charge td(off) - 11 - nS
Gate-Source Charge tf
Gate-Drain Charge Qg VDD=30V,ID=2A,RL=15 - 7.4 - nS
Drain-Source Diode Characteristics
Diode Forward Voltage (Note 3) Qgs VGS=10V,RG=2.5 - 35 - nS
Diode Forward Current (Note 2) Qgd
- 9.1 - nS
VSD
IS VDS=30V,ID=3A, - 15.5 nC
VGS=10V
- 3.2 - nC
- 4.7 - nC
VGS=0V,IS=6A - - 1.2 V
- - 6 A
Notes:
1. Repetitive Rating: Pulse width limited by maximum junction temperature.
2. Surface Mounted on FR4 Board, t 10 sec.
3. Pulse Test: Pulse Width 300s, Duty Cycle 2%.
4. Guaranteed by design, not subject to production
Wuxi NCE Power Semiconductor Co., Ltd Page 2 v1.0
http://www.ncepower.com Pb Free Product
Test Circuit NCE0106Z
1EAS test circuit
2Gate charge test circuit
3Switch Time Test Circuit
Wuxi NCE Power Semiconductor Co., Ltd Page 3 v1.0
http://www.ncepower.com NCE0106Z
Pb-Free Product
Typical Electrical and Thermal Characteristics (curves)
Figure1. Source-Drain Diode Forward Voltage Figure2. Safe operating area
Figure3. Output characteristics Figure4. Transfer characteristics
Figure5. Static drain-source on resistance Figure6. RDS(ON) vs Junction Temperature
Wuxi NCE Power Semiconductor Co., Ltd Page 4 v1.0
http://www.ncepower.com NCE0106Z
Figure7. BVDSS vs Junction Temperature Pb-Free Product
Figure8. VGS(th) vs Junction Temperature
Figure9. Gate charge waveforms Figure10. Capacitance
Figure11. Normalized Maximum Transient Thermal Impedance
Wuxi NCE Power Semiconductor Co., Ltd Page 5 v1.0
http://www.ncepower.com NCE0106Z
TO-92 Package Information
Pb-Free Product
Notes
1. All dimensions are in millimeters.
2. Tolerance 0.10mm (4 mil) unless otherwise specified
3. Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than 5 mils.
4. Dimension L is measured in gauge plane.
5. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
Wuxi NCE Power Semiconductor Co., Ltd Page 6 v1.0
http://www.ncepower.com NCE0106Z
Pb-Free Product
Attention:
Any and all NCE power products described or contained herein do not have specifications that can handle applications that
require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications
whose failure can be reasonably expected to result in serious physical and/or material damage. Consult
with your NCE power representative nearest you before using any NCE power products described or contained herein in
such applications.
NCE power assumes no responsibility for equipment failures that result from using products at values
that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters)
listed in products specifications of any and all NCE power products described or contained herein.
Specifications of any and all NCE power products described or contained herein stipulate the performance, characteristics,
and functions of the described products in the independent state, and are not guarantees of the performance, characteristics,
and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states
that cannot be evaluated in an independent device, the customer should always evaluate and test
devices mounted in the customer's products or equipment.
NCE power Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could
cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or
events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe
design, redundant design, and structural design.
In the event that any or all NCE power products(including technical data, services) described or contained herein are
controlled under any of applicable local export control laws and regulations, such products must not be exported without
obtaining the export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission
of NCE power Semiconductor CO.,LTD.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume
production. NCE power believes information herein is accurate and reliable, but no guarantees are made or implied
regarding its use or any infringements of intellectual property rights or other rights of third parties.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the NCE power
product that you intend to use.
This catalog provides information as of Sep.2010. Specifications and information herein are subject to change without notice.
Wuxi NCE Power Semiconductor Co., Ltd Page 7 v1.0
This datasheet has been downloaded from:
datasheet.eeworld.com.cn
Free Download
Daily Updated Database
100% Free Datasheet Search Site
100% Free IC Replacement Search Site
Convenient Electronic Dictionary
Fast Search System
www.EEworld.com.cn
All Datasheets Cannot Be Modified Without Permission
Copyright Each Manufacturing Company