MRJR Rugged RJ45 Connector
Product Specification S6055C Rev 1.0
About Amphenol
Commercial Products
Amphenol’s commercial
connector products are
used in a variety of end
user applications
including networking,
telecom, server &
computer, storage &
HDD, consumer
electronics and
entertainment,
professional audio &
Industrial &
Military/Aerospace.
MRJ/MRJR Options:
With matching RJ45
MRJR-5381-01 SHOWN
RIGHT ANGLE, PCB
TAIL, 8 POSITION RJ45
With Cable Header
Overview
This Product Specification defines the general use and performance parameters for Amphenol’s
MRJR series of connector.
Availability: Right angle PCB tail termination with 8 or 10 positions, LED options, EMI ferrite
filtering and PCB options (with matching RJ connector, cable header, terminal block or for hand
With Terminal Block wiring). Vertical PCB tail termination with 8 positions and LED options. Dust covers are available
for enhanced mating area protection. A clear rubber boot for use with standard plugs is also
available.
Usage
The connector system is designed to provide a standard RJ45 interface, ideal for harsh
environments where Ethernet/IP protocol is used. Protection is provided for IP68 applications per
IEC 60529 specification. Data rates conform to 10BaseT or 100BaseT Ethernet.
With PCB for wiring
Applications
Intended for use in applications such as:
Medical equipment Military vehicles, radios, computers
ATM machines Test equipment
Lottery terminals & slot Mobile communication systems
machines Traffic control & monitoring systems
GPS positioning equipment
Revision date: May 2, 2012 Page 1 of 3
About Amphenol Connector Electrical Characteristics
Commercial Products Current rating: 1.5A per contact
Amphenol’s commercial Contact resistance: 30 mΩ max
connector products are Insulation Resistance: 500 MΩ min
used in a variety of end Dielectric Withstand Voltage: 1000/1500 V AC @ sea level
user applications LED forward DC current: 25mA max
including networking, LED forward Voltage: 2.5 Volts max. @ 20mA
telecom, server &
computer, storage & Minimum Impedance (Ferrite): 38 Ohms at 25 MHz
HDD, consumer
electronics and Connector Mechanical Characteristics
entertainment,
professional audio & Thermal Shock: 25 cycles @ -40° to +70° C
Industrial & Physical Shock: Per EIA364-27, Condition H (11ms 30G)
Military/Aerospace. Humidity: Per EIC512-6 / EIA364-11A
Related Products Vibration: Per EIA364-28, Condition 5A
Salt spray: Per EIA364-26, 250 Hrs
Mating cycles: 2500
MDBR Assembly Process Characteristics
Recommended Torque for Panel Mount Screws: 0.45 to 0.65 Nm (4.00 – 5.75 in-lbs).
Hand or wave solder: 150°C for 180 seconds (Pre-heat) and 265°C for 8 seconds max (Solder tails).
Solder tails suitable for PCB thickness of 1.57 to 3.18 mm (.062” to 0.125”)
Material Requirements
9 POSITION CONNECTOR MRJR connectors are RoHS compliant.
SHOWN
Unless otherwise specified, the materials for each component shall be:
MUSB Contacts: Phosphor Bronze with 1.27µm (50µ”) min Gold over 1.27µm (50µ”) min Nickel
Housing: High temperature thermoplastic, UL94V-0 rated, Black
Front Housing: Clear Polycarbonate (customer process cleaners must be compatible)
Shell: Die cast Zinc alloy, Nickel plating
Gasket: Silicone rubber
LED: Epoxy lens, Tin plating on steel tail
MUSB-B151-34 Temperature rise: Meets the requirement of 30° C ΔT
SERIES MINI-B, RIGHT
ANGLE SHOWN Operating temperature -40° to +105° C
Available Documents
Drawing Numbers:
P-MRJR-5380-011 MRJR Receptacle, Right Angle, 8 position, Special Gasket and Seal Features
P-MRJR-5381-012 MRJR Receptacle, Right Angle, 8 position, LED, #2-56 Threaded Holes for PCB Mounting
P-MRJR-53XX-X1 MRJR Receptacle, Right Angle, 8 or 10 position, LED, Tail Length and Thread Options
P-MRJR-5E80-031 MRJR Receptacle with 2 MUSB Type A Receptacles, Solder Cup Terminals
Contact Factory, authorized Amphenol representative or website www.amphenolcanada.com for additional configurations
STACKED TYPE A
OVER TYPE A
QTR9300463 Qualification Test Report
Revision date: May 2, 2012 Page 2 of 3
S6055C Rev 1.0
Product Numbering System MRJR - 5 3 8 0 - 0 1
MRJR Connector series designation – Rugged RJ
Version
3 - Receptacle, RJ11 (proposed)
5 - Receptacle, RJ45
6 - Receptacle, RJ45, with EMI filter
7 - Receptacle, RJ45, with Transient Voltage Protection (proposed) note 1
Termination
3 - PCB tail, right angle
5 - PCB tail, right angle, on PCB with right angle cable header
7 - PCB tail, right angle, on PCB with RJ45 right angle termination
8 - PCB tail, right angle, on PCB with RJ45 vertical termination
9 - PCB tail, right angle, on PCB with terminal block
A -PCB tail, right angle, on PCB for hand wiring (termination code 5 board)
B - PCB tail, right angle, on PCB with vertical cable header
C - PCB tail, right angle, on PCB for hand wiring (termination code 7 board)
Number of contacts (note 3)
8 - 8 contacts
A - 10 contacts
LED options
0 - No LEDs
1 - Green left, Yellow right
4 - Yellow left, Green right
5 - Green left, green right
Options (Tail Length & Thread)
0 - Tail 2.54mm (.100"), standard, through hole or #4-40 threaded lugs
B - Tail 3.81mm (.150"), through hole or #4-40 threaded lugs
M - Tail 2.54mm (.100"), M3 threaded lugs
P - Tail 3.81mm (.150"), M3 threaded lugs
Other Features
1 - 1 port (vertical has through hole mounting, right angle has threaded lug)
B - 1 port, vertical connector, through hole mounting, gasket on front shell flange
F - 1 port, vertical connector, threaded lug mounting
N - 1 port, vertical connector, threaded lug mounting, no alignment insert, contact & led length = 4mm (.157")
Unique Special Code
No Digit - Part defined by previous 10 digits Notes
1 to 9 - Unique special feature. Note 4 1) Transient voltage protection is only possible with the connector supplied on a PCB.
2) Dust covers supplied bulk packed with the connectors.
3) 10 contact option is currently available for right angle PCB tail connectors only.
4) Many unique features are readily available to suit customer requirements.
Consult with Amphenol Canada for details.
Amphenol Canada Corp. Page 3 of 3
605 Milner Avenue
Toronto, Ontario, Canada, M1B 5X6 Copyright © Amphenol Corporation 2012 • All rights reserved
+1 416 291 4401
www.amphenolcanada.com
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Amphenol:
MRJR5384M1 MRJR5381B1 MRJR5380M1 MRJR54850F MRJR3460MF MRJR53A401 MRJR3464MF
MRJR5580M1 MRJR53A501 MRJR5485MF MRJR5384B1 MRJR3465MF MRJR34640F MRJR53A0M1
MRJR5584M1 MRJR558501 MRJR5481MF MRJR53A4M1 MRJR5385B1 MRJR5480MF MRJR5484MF
MRJR53A1M1 MRJR3360M1 MRJR5380B1 MRJR3461MF MRJR53A4B1 MRJR558401 MRJR53A0B1
MRJR5585M1 MRJR53A1B1 MRJR53A5M1 MRJR53A5B1 MRJR5381M1 MRJR53A001 MRJR558001
MRJR53A101 MRJR34650F MRJR538501 MRJR54840F MRJR558101 MRJR34610F MRJ5380M1 MRJR5581M1