电子工程世界电子工程世界电子工程世界

产品描述

搜索

HDA800

器件型号:HDA800
器件类别:开发板/开发套件/开发工具   
文件大小:6640.61KB,共4页
厂商名称:H_D
标准:  
下载文档

器件描述

kit eval spb406 BD spb800e-bcm1

参数
Datasheets:
HDA800 Eval Kit Quick Start:
Product Photos:
HDA800:
Standard Package : 1
Category: RF/IF and RFID
Family: RF Evaluation and Development Kits, Boards
Series: -
Type: 802.11 b/g (WiFi, WLAN)
Frequency: 2.4GHz
For Use With/Related Products: -
Supplied Contents: Boards, Module, Cable, USB Stick
Dynamic Catalog: SPB800 Serial to WiFi Evaluation Kit

HDA800器件文档内容

   HDA800 Evaluation Kit

   Quick Start Guide

1  Introduction

This guide will help you to configure the HDA800 Evaluation Kit to run a demonstration of its capabilities. It

describes how to configure the required WiFi, IP and serial port parameters for the demonstration.

2     Requirements

Things you need to have:

     The HDA800 RS-232 to WiFi 802.11b+g adapter

     A PC with a RS-232 serial port or a USB to RS-232 adapter connected to the same network.

     An USB cable to power the HDA800.

     An AP (optional)

Things you need to know:

     The SSID of the WiFi Network to connect to.

     To set a static IP address you need to know:

      o  IP address, network mask and default gateway

3  Demonstration Example

In this example a TCP socket is created on the SPB800 and the serial port terminal (TeraTerm) emulates the

host to communicate with the “host” a telnet connection is opened in a command window
H&D Wireless AB, HDA800 Evaluation Kit                 PRELIMINARY        Quick Start Guide page           2 ( 4)

3.1    How to do it

3.1.1  Using Soft AP

Soft AP is only available from hardware revision R4A of the SPB800-B/D and SPB800-E rev R1A built as a

single PCB.

Out of the box SPB800 is configured in Soft AP mode with the ssid set to hdconfig-xx-xx-xx where xx-xx-xx

are the last six digits of the MAC address and need no configuration to run the demo.

      Power up the SPB800 and let the dots pass in the terminal window.

      Scan for WLAN networks and connect the PC to hdconfig-xx-xx-xx. The two LEDs on the SPB800

       should light up when a client connect.

      Open a command window by clicking START -> Run and then type cmd in the new window and hit

       return.

      In the command window type:

                telnet 192.168.1.1 2000

      This will open a TCP socket on port 2000 to start communicating with the TeraTerm terminal via the

       SPB800.

                1543-HDA800 Evaluation Kit- Quick Start Guide

Copyright © 2010 H&D Wireless AB, All rights reserved
H&D Wireless AB, HDA800 Evaluation Kit                 PRELIMINARY  Quick Start Guide page                  3 ( 4)

      Now text that you type in the telnet window will be sent to the TeraTerm terminal and the

       opposite as well. Please note that the TeraTerm won’t echo what you type in its own window.

3.1.2  With the SPB800 as station (client)

      Connect the HDA800 to a PC with TeraTerm or any other serial port terminal. (115200, 8-bit, none,

       1-bit, none)

      Hit “Enter” when you see the dots in the terminal window.

      First we need to set the parameter /wl/mode to set the SPB800 in station mode

       $ db set /wl/mode sta

      Then we continue with entering the SSID (if you are connecting to a secured network you need to

       enter key_type and key as well.

       $ db set /wl/ssid my-ssid

      We enter the IP address we have selected for the HDA800. Make sure that is does not collide with

       any other static set address or the address range managed by the networks DHCP server.

       $ db set /net/ip 192.168.2.10

      Type “db get” to list all parameters and check their values, satisfied with the result we enter the

       parameters into the flash with ”db store”

       $ db store

      To start with the new parameters we do reset.

       $ reset

                     1543-HDA800 Evaluation Kit- Quick Start Guide

Copyright © 2010 H&D Wireless AB, All rights reserved
H&D Wireless AB, HDA800 Evaluation Kit                 PRELIMINARY          Quick Start Guide page     4 ( 4)

  When changing between AP and station mode the SPB800 light up LED1 during reset. After the

   device has restarted and connected to the network it will light up the two LEDs on the SPB800E,

   LED 1 indicating association to the WLAN and LED 2 IP address acquired.

  Open a command window by clicking START -> Run and then type cmd in the new window and hit

   return.

  In the command window type:

            telnet 192.168.2.10 2000

  This will open a TCP socket on port 2000 to start communicating with the TeraTerm terminal via the

   SPB800.

  Now text that you type in the telnet window will be sent to the TeraTerm terminal and the

   opposite as well. Please note that the TeraTerm won’t echo what you type in its own window.

            1543-HDA800 Evaluation Kit- Quick Start Guide

Copyright © 2010 H&D Wireless AB, All rights reserved
小广播

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京ICP证060456号 京ICP备10001474号 电信业务审批[2006]字第258号函 京公海网安备110108001534 Copyright © 2005-2020 EEWORLD.com.cn, Inc. All rights reserved