Economical, Compact, Plug-in Timer
• Time limit, ON-delay, operation with automatic resetting.
• DIN size (36 x 36 mm), fits standard 8-pin sockets.
• Wide choice of supply voltages:
24, 100 to 120, 200 to 240 VAC, 12, 24 VDC.
• Dual LED indication for power and output status.
• Large transparent setting knob.
• Setting error rating almost matches that of a 48 x 48 timer.
• Conforms to UL and CSA, and meets CE marking
Stock Note: Shaded models are normally stocked.
Operation/resetting Time-limit contact Mounting method Rated time Model
Time-limit operation/ SPDT Surface mounting, flush 1 s, 3 s, 5 s, 10 s, 30 s, 60 s, H3JA-8A
self-resetting mounting, and DIN track 3 min, 5 min, 10 min, 30
mounting min, 60 min, 3 hrs
DPDT 1 s, 3 s, 5 s, 10 s, 30 s, 60 s, H3JA-8C
3 min, 5 min, 10 min, 30
min, 60 min, 3 hrs
Note: Specify the model number, supply voltage, and rated time when ordering.
Ex. H3JA-8A 100 to 120 VAC 1s
Solid-state Timer H3JA 1
■ Accessories (Order Separately)
Stock Note: Shaded models are normally stocked.
Flush mounting adapter Y92F-31
Mounting track 50 cm (l) x 7.3 mm (t) PFP-50N
1 m (l) x 7.3 mm (t) PFP-100N
1 m (l) x 16 mm (t) PFP-100N2
End plate PFP-M
Track mounting/ 8-pin PF085A
Front connecting socket
Back connecting socket 8-pin P3G-08
8-pin, finger safe type P3G-08 with Y92A-48G (see note 1)
Hold-down clip (see note 2) For PF085A Socket Y92H-6
Note: 1. Y92A-48G is a finger safe terminal cover which is attached to the P3G-08 Socket.
2. Hold-down Clips are sold in sets of two.
■ Time Ranges
Rated time Time range Rated time Time range
1s 0.1 to 1 s 3 min 0.3 to 3 min
3s 0.3 to 3 s 5 min 0.5 to 5 min
5s 0.5 to 5 s 10 min 1 to 10 min
10 s 1 to 10 s 30 min 3 to 30 min
30 s 3 to 30 s 60 min 6 to 60 min
60 s 6 to 60 s 3 hrs 0.3 to 3 hrs
Rated supply voltage 24, 100 to 120 or 200 to 240 VAC (50/60 Hz);
24 VDC; 12 VDC (only available on H3JA-8A model)
Operating voltage range 85% to 110% of rated supply voltage
Power consumption H3JA-8A
100 to 120 VAC: Approx. 3 VA (1.3 W) at 120 VAC
200 to 240 VAC: Approx. 5 VA (1.5 W) at 240 VAC
24 VAC: Approx. 1.2 VA (0.9 W) at 24 VAC
24 VDC: Approx. 0.8 W at 24 VDC
100 to 120 VAC: Approx. 3 VA (1.1 W) at 120 VAC
200 to 240 VAC: Approx. 5 VA (1.3 W) at 240 VAC
24 VAC: Approx. 1.3 VA (1 W) at 24 VAC
24 VDC: Approx. 0.9 W at 24 VDC
Control outputs H3JA-8A: 7 A at 250 VAC, resistive load
H3JA-8C: 5 A at 250 VAC, resistive load
2 Solid-state Timer H3JA
Accuracy of operating time ±2% max.
Setting error ±7% max.
Influence of voltage ±2% max.
Influence of temperature ±5% max.
Insulation resistance 100 MΩ min. (at 500 VDC)
Dielectric strength 2,000 VAC, 50/60 Hz for 1 min (between current-carrying and non-current-carrying parts, and between
contact-carrying and control circuit, and between contacts of different poles)
1,000 VAC, 50/60 Hz for 1 min (between non-continuous contacts)
Impulse withstand voltage 3 kV (between power terminals)
4.5 kV (between current-carrying terminal and exposed non-current-carrying metal parts)
Noise immunity ±1.5 kV (between power terminals) and ±1.5 kV (between output terminals), square-wave noise by
noise simulator (pulse width: 100 ns/1 µs, 1-ns rise)
Static immunity Destruction: 8 kV
Malfunction: 6 kV
Vibration resistance Destruction: 10 to 55 Hz with 0.75-mm double amplitude in 3 directions for 1 hour each.
Malfunction: 10 to 55 Hz with 0.5-mm double amplitude in 3 directions for 10 minutes each.
Shock resistance Destruction: 1,000 m/s2
Malfunction: 100 m/s2
Ambient temperature Operating: –10°C to 55°C
Storage: –25°C to 65°C
Ambient humidity Operating: 35% to 85%
Life expectancy H3JA-8A
Mechanical: 10,000,000 operations min.
Electrical: 60,000 operations min. (7 A resistive load at 250 VAC, 360 operations/h)
Mechanical: 10,000,000 operations min.
Electrical: 100,000 operations min. (5 A resistive load at 250 VAC, 360 operations/h)
Emission Enclosure: EN55011 Group 1 class A
Emission AC Mains: EN55011 Group 1 class A
Immunity ESD: EN61000-4-2: 6 kV contact discharge (level 3)
8 kV air discharge (level 3)
Immunity RF-interference from AM Radio Waves:
EN61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3)
Immunity Burst: EN61000-4-4: 2 kV power port and output port (level 3)
1 kV control port with capacitive clamp (level 3)
Immunity Surge: EN61000-4-5: 2 kV common mode (level 3)
1 kV differential mode (level 3)
Approved standard UL508, CSA C22.2 No. 14, conforms to EN61812-1
Case color Light gray (Munsell 5Y7/1)
Degree of protection IP40 (panel surface)
Weight H3JA-8A: Approx. 50 g
H3JA-8C: Approx. 60 g
Solid-state Timer H3JA 3
■ H3JA-8A ■ H3JA-8C
(x 10 3 5,000 10 3 )
Switching operations 30 VDC Switching operations (x
1,000 120 VAC
load 120 VAC
100 L/R=7 ms inductive
50 cosφ=0.4 250 VAC φ
0 1 2 3 4 5 6 7
Load current (A) Load current (A)
4 Solid-state Timer H3JA
■ Timing Chart
H3JA-8A 100 ms min.
Set time Set time
Time UP indicator
Power ON indicator
100 ms min.
Set time Set time
Time UP indicator
Power ON indicator
Unit: mm (inch)
7 60 (2.36) 14.2
36 (1.42) LED 4 0.7
(1.42) 30.5 (1.29)
Solid-state Timer H3JA 5
■ Accessories (Order Separately
Flush Mounting Adapter
Y92F-31 Panel Cutout
Adapter Y92F-31 shown with H3JA-8
Recommended panel thickness: 1 to 5 mm
and back connecting socket.
Track Mounting/Front Connecting Socket
Terminal Arrangement Mounting Holes Mounting Height of
(Top View) Timer with Socket
Hold-down Clips (Set of Two Clips)
Y92H-6 for PF085A
6 Solid-state Timer H3JA
Back Connecting Socket
Finger Safe Terminal Cover
Conforming to VDe0106/P100
(Attachments for P3G-08 Socket)
PFP-100N, PFP-50N PFP-100N, PFP-50N
35±0.3 27±0.15 35±0.3 27 24 29.2
15 25 25 25 25 15 *5 15 25 25 25 25 15 1 1.5
10 10 (*see note) 1 10 1,000 10
Note: The values shown with an asterisk are for the
End Plate Spacer
6.2 5 12
50 35.5 35.3 44.3 34.8
10 M4 x 8
pan head 4.8 16.5
Solid-state Timer H3JA 7
■ Terminal Arrangement
8 Solid-state Timer H3JA
Certain Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the
part of all catalogs, manuals or other documents, whether electronic or in writ- Goods will be free from defects in materials and workmanship for a period of
ing, relating to the sale of goods or services (collectively, the "Goods") by twelve months from the date of sale by Seller (or such other period expressed
Omron Electronics LLC and its subsidiary companies ("Seller"). Seller hereby in writing by Seller). Seller disclaims all other warranties, express or implied.
objects to any terms or conditions proposed in Buyer's purchase order or other (b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION,
documents which are inconsistent with, or in addition to, these Terms. Please EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
contact your Omron representative to confirm any additional terms for sales ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS.
from your Omron company. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
2. Prices. All prices stated are current, subject to change without notice by GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
Seller. Buyer agrees to pay the price in effect at time of shipment. INTENDED USE. Seller further disclaims all warranties and responsibility of
3. Discounts. Cash discounts, if any, will apply only on the net amount of any type for claims or expenses based on infringement by the Goods or other-
invoices sent to Buyer after deducting transportation charges, taxes and wise of any intellectual property right. (c) Buyer Remedy. Seller's sole obliga-
duties, and will be allowed only if (i) the invoice is paid according to Seller's tion hereunder shall be to replace (in the form originally shipped with Buyer
payment terms and (ii) Buyer has no past due amounts owing to Seller. responsible for labor charges for removal or replacement thereof) the non-
4. Orders. Seller will accept no order less than $200 net billing. complying Good or, at Seller's election, to repay or credit Buyer an amount
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all equal to the purchase price of the Good; provided that in no event shall Seller
costs involved in, obtaining any government approvals required for the impor- be responsible for warranty, repair, indemnity or any other claims or expenses
tation or sale of the Goods. regarding the Goods unless Seller's analysis confirms that the Goods were
6. Taxes. All taxes, duties and other governmental charges (other than general properly handled, stored, installed and maintained and not subject to contami-
real property and income taxes), including any interest or penalties thereon, nation, abuse, misuse or inappropriate modification. Return of any goods by
imposed directly or indirectly on Seller or required to be collected directly or Buyer must be approved in writing by Seller before shipment. Seller shall not
indirectly by Seller for the manufacture, production, sale, delivery, importation, be liable for the suitability or unsuitability or the results from the use of Goods
consumption or use of the Goods sold hereunder (including customs duties in combination with any electrical or electronic components, circuits, system
and sales, excise, use, turnover and license taxes) shall be charged to and assemblies or any other materials or substances or environments. Any
remitted by Buyer to Seller. advice, recommendations or information given orally or in writing, are not to be
7. Financial. If the financial position of Buyer at any time becomes unsatisfactory construed as an amendment or addition to the above warranty.
to Seller, Seller reserves the right to stop shipments or require satisfactory 13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDI-
security or payment in advance. If Buyer fails to make payment or otherwise RECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUC-
comply with these Terms or any related agreement, Seller may (without liability TION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE
and in addition to other remedies) cancel any unshipped portion of Goods sold GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY,
hereunder and stop any Goods in transit until Buyer pays all amounts, includ- NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of
ing amounts payable hereunder, whether or not then due, which are owing to it Seller exceed the individual price of the Good on which liability is asserted.
by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation its employees from and against all liabilities, losses, claims, costs and
unless Buyer indemnifies Seller fully against all costs or expenses arising in expenses (including attorney's fees and expenses) related to any claim, inves-
connection therewith. tigation, litigation or proceeding (whether or not Seller is a party) which arises
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery or is alleged to arise from Buyer's acts or omissions under these Terms or in
resulting from causes beyond its control, including earthquakes, fires, floods, any way with respect to the Goods. Without limiting the foregoing, Buyer (at
strikes or other labor disputes, shortage of labor or materials, accidents to its own expense) shall indemnify and hold harmless Seller and defend or settle
machinery, acts of sabotage, riots, delay in or lack of transportation or the any action brought against Seller to the extent that it is based on a claim that
requirements of any government authority. any Good made to Buyer specifications infringed intellectual property rights of
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller: another party.
a. Shipments shall be by a carrier selected by Seller; 15. Property; Confidentiality. The intellectual property embodied in the Goods is
b. Such carrier shall act as the agent of Buyer and delivery to such carrier the exclusive property of Seller and its affiliates and Buyer shall not attempt to
shall constitute delivery to Buyer; duplicate it in any way without the written permission of Seller. Notwithstand-
c. All sales and shipments of Goods shall be FOB shipping point (unless oth- ing any charges to Buyer for engineering or tooling, all engineering and tooling
erwise stated in writing by Seller), at which point title to and all risk of loss of shall remain the exclusive property of Seller. All information and materials
the Goods shall pass from Seller to Buyer, provided that Seller shall retain a supplied by Seller to Buyer relating to the Goods are confidential and propri-
security interest in the Goods until the full purchase price is paid by Buyer; etary, and Buyer shall limit distribution thereof to its trusted employees and
d. Delivery and shipping dates are estimates only. strictly prevent disclosure to any third party.
e. Seller will package Goods as it deems proper for protection against normal 16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right
handling and extra charges apply to special conditions. and no course of dealing between Buyer and Seller shall operate as a waiver
11. Claims. Any claim by Buyer against Seller for shortage or damage to the of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder
Goods occurring before delivery to the carrier must be presented in writing to without Seller's written consent. (c) Amendment. These Terms constitute the
Seller within 30 days of receipt of shipment and include the original transporta- entire agreement between Buyer and Seller relating to the Goods, and no pro-
tion bill signed by the carrier noting that the carrier received the Goods from vision may be changed or waived unless in writing signed by the parties.
Seller in the condition claimed. (d) Severability. If any provision hereof is rendered ineffective or invalid, such
provision shall not invalidate any other provision. (e) Setoff. Buyer shall have
no right to set off any amounts against the amount owing in respect of this
invoice. (f) As used herein, "including" means "including without limitation".
Certain Precautions on Specifications and Use
1. Suitability of Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's pro-
dards, codes or regulations which apply to the combination of the Good in the gramming of a programmable Good, or any consequence thereof.
Buyer's application or use of the Good. At Buyer's request, Seller will provide 3. Performance Data. Performance data given in this catalog is provided as a
applicable third party certification documents identifying ratings and limitations guide for the user in determining suitability and does not constitute a warranty.
of use which apply to the Good. This information by itself is not sufficient for a It may represent the result of Seller's test conditions, and the user must corre-
complete determination of the suitability of the Good in combination with the late it to actual application requirements. Actual performance is subject to the
end product, machine, system, or other application or use. The following are Seller's Warranty and Limitations of Liability.
some examples of applications for which particular attention must be given. 4. Change in Specifications. Product specifications and accessories may be
This is not intended to be an exhaustive list of all possible uses of this Good, changed at any time based on improvements and other reasons. It is our prac-
nor is it intended to imply that the uses listed may be suitable for this Good: tice to change part numbers when published ratings or features are changed,
(i) Outdoor use, uses involving potential chemical contamination or electrical or when significant construction changes are made. However, some specifica-
interference, or conditions or uses not described in this document. tions of the Good may be changed without any notice. When in doubt, special
(ii) Energy control systems, combustion systems, railroad systems, aviation part numbers may be assigned to fix or establish key specifications for your
systems, medical equipment, amusement machines, vehicles, safety application. Please consult with your Seller's representative at any time to con-
equipment, and installations subject to separate industry or government firm actual specifications of purchased Good.
regulations. 5. Errors and Omissions. The information in this catalog has been carefully
(iii) Systems, machines and equipment that could present a risk to life or checked and is believed to be accurate; however, no responsibility is assumed
property. Please know and observe all prohibitions of use applicable to for clerical, typographical or proofreading errors, or omissions.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR
THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Solid-state Timer H3JA 9
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.omron.com/oei – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ELECTRONICS LLC OMRON CANADA, INC. OMRON ON-LINE
One Commerce Drive 885 Milner Avenue Global - http://www.omron.com
Schaumburg, IL 60173 Toronto, Ontario M1B 5V8 USA - http://www.omron.com/oei
847-843-7900 416-286-6465 Canada - http://www.omron.ca
For US technical support or other inquiries:
Cat. No. L100-E3-01 12/03 Specifications subject to change without notice Printed in USA
10 Solid-state Timer H3JA
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
H3JA-8A AC100-120 10M H3JA-8C AC200-240 30M H3JA-8C AC100-120 30M H3JA-8C AC200-240 5S H3JA-8A
AC200-240 30S H3JA-8C DC24 3M H3JA-8A AC100-120 5S H3JA-8A AC100-120 30M H3JA-8C AC24 5S H3JA-8C
AC100-120 3M H3JA-8A AC100-120 60S H3JA-8C-AC100-120 5S H3JA-8C AC200-240 10S H3JA-8A AC24 60S
H3JA-8C AC24 10M H3JA-8A AC100-120 3H H3JA-8C AC100-120 3H H3JA-8A DC24 60S H3JA-8C DC24 60S
H3JA-8C AC200-240 60M H3JA-8A DC12 10S H3JA-8C DC24 30S H3JA-8C AC200-240 5M H3JA-8C DC24 5S
H3JA-8A AC200-240 3M H3JA-8A AC100-120 60M H3JA-8C AC200-240 3M H3JA-8C AC100-120 3S H3JA-8A
DC12 3M H3JA-8C AC24 30S H3JA-8A AC100-120 1S H3JA-8A AC100-120 10S H3JA-8A AC100-120 30S