CODE READER FQ-CR SERIES
Exceptional Reading Performance with Easy Operation
Multi Code Reader
2D Code Reader for Direct Part Marking codes
» Read from everything from paper and labels to metal, PCBs, and glass for a wide range of applications.
Solve a variety off different applications with one product series
Read Codes Printed on Paper or Labels Multi Code Reader FQ-CR1 Series
Paper or Cardboard Medical Packs
ITF (Interleaved 2 of 5) QR Code Codebar (NW-7)
PET Bottles Medication Boxes
JAN/EAN/UPC Data Matrix GS1-DataBar
Reads 14 Different Codes FQ-CR1
Many different codes are used for different applications. And for some products, different codes are printed together.
The FQ-CR1 can read many different codes without requiring any changes to its settings.
Barcodes: JAN/EAN/UPC Code39 Codabar (NW-7)
Reads 9 ITF (Interleaved 2 of 5) Code93 Code128 / GS1-128
different codes. GS1-DataBar GS1-128 Composite Code Pharmacode
2D codes: Data Matrix QR Code Micro QR Code
Reads 5 PDF417 Micro PDF417
• QR code is the registered trademark of DENSO WAVE.
There are many instances when different barcode or 2D code systems are used together in the same manufacturing process.
Code printing quality can also vary due to imperfect printing or low contrast.
The FQ-CR Series handles these and many other conditions.
The FQ-CR Series can be easily introduced without using different code readers and
operating procedures for each of the different processes.
Reads Direct Part Marking (DPM) Codes 2D Code Reader for FQ-CR2 Series
Direct Part Marking (DPM) codes
DPM codes on Resin
DPM codes on small parts DPM codes on metal DPM codes on film or glass
Data Matrix Data Matrix Data Matrix
Easily reads difficult codes FQ-CR2
Just read the code and register it, and then let the following functions automatically tune the settings.
Depending on the conditions of the code, the automatic retry and code error correction functions let, essentially anyone, easily adjust the settings.
Filter function Retry function Code Error Correction
Three stages of filtering are automatically You can retry the settings until reading is Code omissions and errors are automatically
selected for the read image from Smooth, Dilate, successful while automatically changing the corrected when the code is read.
Erosion, and Median filtering. exposure time and other reading parameters.
Before Dilation After Dilation Before Retry After Retry Before Processing After Processing
OMRON’s Unique Algorithm Provides
Superior Reading Ability for Direct Part Marking codes
Removal of Printing Irregularities or Noise
You can apply up to three of the four unique filters developed by OMRON
in the desired order to remove printing irregularities and noise, in order to achieve a stable reading.
Types of Filtering
Smooth Smooths the image. Erosion For white codes, reduces the cell size.
Effective for reading separated dot codes.
Dilate For white codes, increases the cell size. Median Removes noise.
Effective for reading codes with cell spreading.
Combining Filtering Erosion and dilation can be combined to connect dots without changing the dot thickness.
Automatic Parameter Adjustment Until Reading is Successful
Code Readers must be able to read codes even for poor printing conditions. You can automatically retry reading while changing the exposure time
and other reading conditions, even for changing workpieces or environments, to enable a stable reading.
The following retry functions are provided.
1 Retrying the Specified Number of Times with the Same Conditions NG N G OK
Reading is performed the specified number of times for the same scene.
2 Retrying While External Trigger Is Input During level trigger input
Reading is performed until successful, as long as an external level trigger is input. NG NG OK
3 Retrying While Changing the Shutter Speed NG NG NG OK
Reading is performed for the same scene while changing the exposure time in stages.
1ms 1.3ms 0.7ms 1.6ms
4 Retrying While Changing the Reading Conditions NG NG OK
When reading DPM codes, inconsistencies in printing conditions can result Scene 1 Scene 2 Scene 3
in NGs if reading is performed with only one set of reading settings. Register 32 sets of reading conditions.
The FQ-CR allows you to register up to 32 sets of Rapidly switch to the optimum reading conditions.
reading conditions as scenes and retry reading
while changing the scenes in order.
The system automatically determines the scenes
with the highest usage rates and changes the order to start Scene 2 Scene 4 Scene 6 Scene 8 Scene 32
with them to flexibly handle changes in reading conditions.
Of course you can specify a fixed order if required.
Scene 1 Scene 3 Scene 5 Scene 7 Scene 31
Easy Confirmation of Code Quality
Code Error Correction Position Display
Red circles are displayed on cells
for which the code was corrected on the display.
This clearly shows where the code quality was poor.
Stable Reading Functions Packed into a Compact Body
Cuts specular reflections.
High power LEDs
Four times the brightness of previous models.
Lens and Camera
simple fine tuning of camera focus.
Built-in HDR function.
Robust housing: IP67
Output read codes on Ethernet.
Detection and Connection
Reads Codes Even with Low Contrast
The wider the field of view, the more difficult it is to maintain consistent
lighting within the field, causing errors in reading. The built-in LEDs of
the FQ-CR Series use a unique OMRON DR optical system for effective
light usage to maintain consistent lighting within the field of vision at a
brightness that is four times that of previous models. Previous Lighting High-power Lighting
Cuts Light Interference
The HDR (high dynamic range) function minimizes the influence of
changes in lighting conditions and light reflection. This enables
stable inspections even for materials that are difficult to light evenly,
such as metal parts or glossy films, or in locations subject to external Halation Stable Detection for
light interference. Metal Surfaces Subject to
Gloss and Inconsistent Lighting
Cuts Specular Reflections
A polarizing filter is included to cut specular reflection from glossy
surfaces. This enables stable code reading even for metallic or other
glossy surfaces. Without Polarizing Filter With Polarizing Filter
Communications with Host Devices
The compact body also provides an Ethernet connector so that you
can transfer read data and images via Ethernet. Smoothly transfer
data to PLCs, computers, or other host devices.
Essentially, Simple Enough for Anyone to Set Up
Setup is as easy as displaying codes on the monitor and registering settings with a simple procedure.
Then, the FQ-CR will automatically tune the settings to achieve the optimum conditions.
You can automatically tune all of these reading conditions just by making the basic settings.
Optimum Tuning in Three Steps
Read a code. Select the type of code.
Two Set-up Tools
Use the convenient Touch Finder
for on-site settings and control panel installations,
or use a set-up tool on a computer.
TouchFinder for PC (Free)
After purchasing the Code Reader,
you can download the TouchFinder for PC free from the member’s website.
Set-up and Adjustment
Exposure Time Gain Dynamic Range Filtering
Press the TEACH Button. Check to see if the conditions
are correct as a reference.
Menu Displays in Nine Languages Operation Navigation
The nine language support for menus means Navigation menus for operating procedures
that you can easily introduce systems into from image adjustment through to testing and
factory sites in other countries. starting operation are provided so that even
In addition, you can easily change the language beginners can operate the Code Reader.
on a menu.
Traditional Chinese Italian Setup
Simplified Chinese Spanish flow
Flexible System Configuration
Connect Up To Eight Code Readers
The flexibly arrangeable platform can be used for
simple configurations with one Code Reader for
complex configurations with multiple Code Readers
reading from different directions.
Up to eight Code Readers can be controlled from the
Touch Finder set-up console.
Code Quality Management File Logging
The FQ-CR2 contains state-of-the-art algorithms that enable the reading of codes even SD Card
with poor reading quality. However, even if the code quality continues to deteriorate for Cell recognition rate
Up to 10 million measurement
some reason, auto-correction and retrying are used to enable reading, making it values or more
impossible to tell where quality was lost simply from the OK/NG reading information. (for a 4-GB SD card)
Up to 10,000 images or more
Here, you can use the cell recognition rate information. The cell recognition rate changes (for a 4-GB SD card)
with code printing quality, position inconsistency, installation conditions, and noise. You
can log the cell recognition rate and image together to manage quality trends. The Logging of Recent Results
logging of recent results is useful for testing when commissioning a line. Run through
some sample products and log the cell recognition rate. You can then display the results
in a time-based graph to see how much leeway there is in reading performance. Displays the most recent 1,000
cell recognition rate in graph form.
* For the FQ-CR1, the number of detected characters is logged instead of the cell recognition rate.
Commissioning and Operation
Match your field of viewɹ
No matter whether you handle large or small workpieces, the range of Omron
FQ-CR Code Readers offers a perfect match. Select the FQ-CR model with the
appropriate range and adjust the field of view to your application. Focusing is
quick and easy too, enabling you to use the sensor for a variety of applications.
Field of vision 13
Narrow view 38 57
Field of vision 53
Standard 8.2 215
Field of vision
Touch Finder 153
Wide View 33 970
(long-distance) 0 220
Field of vision 191
Wide View 18 380
(short-distance) 0 32
TouchFinder for PC
Automatic Notification of NGs
If you leave the Touch Finder installed on-site, the
recent NG sensor display is very useful. Even if you
are monitoring more than one Code Reader with
the Touch Finder, the display automatically
changes to the Code Reader where an NG occurred
so that you can quickly confirm conditions.
12 System Configuration
Connections for One Code Reader
Control by parallel input/output Control by Ethernet
FQ-CR FQ-CR Ethernet Cables I/O Cables
Touch Finder Code Reader Sensor trigger FQ-CR Sensor trigger
Touch Finder Switching Code Reader
Power Supply 24 VDC Power Supply 24 VDC
FQ-CR Ethernet Cables I/O Cables Standard Ethernet Cables PLC
(RJ-45 of the FCC regulations) Standard Ethernet Cables
(RJ-45 of the FCC regulations)
Connections for Multiple Code Reader
Control by parallel input/output Control by Ethernet
Up to 32 Code Reader can be connected. Up to 32 Code Reader can be connected.
FQ-CR Ethernet Cables
Touch Finder Switching Touch Finder Switching
Connect the trigger Connect the trigger
Standard Ethernet Cables sensor, power supply PLC sensor, power supply
to each Code Reader. Standard Ethernet Cables Standard Ethernet Cables
(RJ-45 of the FCC regulations) FQ-CR Ethernet Cables (RJ-45 of the FCC regulations) (RJ-45 of the FCC regulations) to each Code Reader.
Note: If you register as a member after purchasing a Code Reader, you can download the free set-up software TouchFinder for PC that runs on
a PC and can be used in place of the Touch Finder. Refer to the member registration sheet for details.
Code Reader (Unit: mm)
Narrow View Standard Wide View (Short-distance)
Field of vision 53
Field of vision 13 Field of vision Field of vision
7.5 33 153 191
8.2 13 53 29
4.7 57 8.2 215 33 970 18 380
38 to 56 to 220 to 32 to
0 0 0 0
2D Code Multi Code 2D Code Multi Code 2D Code Multi Code 2D Code Multi Code
Reader Reader Reader Reader Reader Reader Reader Reader
NPN FQ-CR20010F-M FQ-CR10010F-M NPN FQ-CR20050F-M FQ-CR10050F-M NPN FQ-CR20100F-M FQ-CR10100F-M NPN FQ-CR20100N-M FQ-CR10100N-M
PNP FQ-CR25010F-M FQ-CR15010F-M PNP FQ-CR25050F-M FQ-CR15050F-M PNP FQ-CR25100F-M FQ-CR15100F-M PNP FQ-CR25100N-M FQ-CR15100N-M
Note: Tolerance (field of vision): ±10% max.
Touch Finder Accessories
Type Model Application Appearance Name Model
DC power supply FQ2-D30 Mounting Bracket FQ-XL
AC/DC/battery FQ2-D31 (See note.) (enclosed with Code Reader)
Note: AC Adapter and Battery are sold separately. For Code Mounting Bracket for
Cables (Robot cable) Reader highprecision sensing *1 FQ-XL2
Type Cable length Model Polarizing Filter Attachment FQ-XF1
FQ Ethernet Cables 2m FQ-WN002 (enclosed with Code Reader)
(connect Code Reader to Touch 10 m FQ-WN010
Finder, Code Reader to PC) 20 m FQ-WN020 Panel Mounting Adapter FQ-XPM
I/O Cables 10 m FQ-WD010 AC Adapter FQ-AC1
20 m FQ-WD020 (for models for DC/AC/Battery)
Industrial Switching Hubs (Recommended) Battery *2 FQ-BAT1
(for models for DC/AC/Battery)
Appearance Number Failure Current Model
of ports detection consumption Touch Pen
(enclosed with Touch Finder)
3 None 0.22 A W4S1-03B
5 0.22 A
Supported W4S1-05C SD Card (2 GB) HMC-SD291
*1. A mounting Bracket with improved resistance to vibrations and other external
stresses that cause displacement of the optical axis and field of view.
*2. The Battery uses a lithium ion secondary battery. Confirm any applicable
laws and regulations in the destination country if you export the Battery.
Ratings and Performance 13
Item Type 2D Code Reader Multi Code Reader
Model NPN FQ-CR20@@@@-M FQ-CR10@@@@-M
PNP FQ-CR25@@@@-M FQ-CR15@@@@-M
Field of vision Refer to the table below.
Minimum resolution FQ-CR2@010F-M/-CR1@010F-M: 0.040 mm FQ-CR2@050F-M/-CR1@050F-M: 0.070 mm
FQ-CR2@100F-M/-CR1@100F-M: 0.282 mm FQ-CR2@100N-M/-CR1@100N-M: 0.155 mm
2D Code (DataMatrix (EC200), QR Code, MicroQR
Code, PDF417, MicroPDF417, GS1-DataMatrix)
Bar code (JAN/EAN/UPC, Code39,
Codabar (NW-7), ITF (Interleaved 2 of 5),
Code 2D Code (DataMatrix (EC200), QR Code) Code 93, Code128/GS1-128, GS1 DataBar*
(Truncated, Stacked, Omni-directional, Stacked
Omni-directional, Limited, Expanded and Expanded
Stacked), Pharmacode and GS1-128 Composite
Main functions Code (CC-A, CC-B, CC-C))
Filter function (Smooth, Dilate, Erosion,Median),
Image filter Retry function, Code Error Correction Position None
Verification function None Supported
Number of simultaneous 32
Number of registered scenes 32
Image filter High dynamic range (HDR), polarizing filter (attachment)
Image input Image elements 1/3-inch monochrome CMOS
Shutter 1/250 to 1/32,258 s 1/250 to 1/30,000 s
Processing resolution 752 × 480
Lighting method Pulse
Lighting Lighting color White
LED class Risk Group 2 (IEC62471)
Data logging Measurement data In Code Reader:1,000 items (If a Touch Finder is used, results can be saved up to the capacity of an SD card.)
Images In Code Reader:20 images (If a Touch Finder is used, images can be saved up to the capacity of an SD card.)
Measurement trigger External trigger (single or continuous)
Input signals • Single measurement input (TRIG)
• Control command inputs (IN0 to IN5)
• Control output (BUSY)
I/O Output signals • Overall judgement output (OR)
specifications • Error output (ERROR)
Note: The three output signals can be allocated for the judgements of individual inspection items.
Ethernet specification Numerical outputs and control commands are supported with no-protocol communications.
Special connector cables
Connection method • Power supply and I/O: 1 cable (FQ-WD@@@)
• Touch Finder and computer: 1 cable (FQ-WN@@@)
Ratings Power supply voltage 21.6 to 26.4 VDC (including ripple)
Current consumption 2.4 A max.
Operating: 0 to 50°C
Ambient temperature range Storage: −25 to 65°C
Environmental (with no icing or condensation)
immunity Ambient humidity range Operating and storage: 35% to 85% (with no condensation)
Ambient atmosphere No corrosive gas
Degree of protection IEC 60529 IP67 (Except when Polarizing Filter Attachment is mounted.)
Code Reader: PBT, PC, SUS
Mounting Bracket: PBT
Materials Polarizing Filter Attachment: PBT, PC
Ethernet connector: Oil-resistance vinyl compound
I/O connector: Lead-free heat-resistant PVC
• Mounting Bracket (FQ-XL) (1) • Member registration sheet
Accessories • Polarizing Filter Attachment (FQ-XF1) (1)
• Instruction Manual
2D Code Reader Multi Code Reader Field of view
NPN PNP NPN PNP (See note) Installation distance Weight
(Horizontal × Vertical)
FQ-CR20010F-M FQ-CR25010F-M FQ-CR10010F-M FQ-CR15010F-M 7.5 × 4.7 to 13 × 8.2 mm 38 to 57 mm
FQ-CR20050F-M FQ-CR25050F-M FQ-CR10050F-M FQ-CR15050F-M 13 × 8.2 to 53 × 33 mm 56 to 215 mm 200 g max.
FQ-CR20100F-M FQ-CR25100F-M FQ-CR10100F-M FQ-CR15100F-M 53 × 33 to 240 × 153 mm Long-distance model: 220 to 970 mm
FQ-CR20100N-M FQ-CR25100N-M FQ-CR10100N-M FQ-CR15100N-M 29 × 18 to 300 × 191 mm Short-distance model: 32 to 380 mm
Note: Tolerance: ±10% max.
Type Model with DC power supply Model with AC/DC/battery power supply
Item Model FQ2-D30 FQ2-D31
Number of connectable Sensor Number of sensors that can be recognized (switched): 32 max. number or sensor that can displayed on
monitor: 8 max.
Types of measurement displays Last result display, Last NG display, trend monitor, histograms
Main functions Types of display images Through, frozen, zoom-in, and zoom-out images
Data logging Measurement results, measured images
Menu language English, German, French, Italian, Spanish, Traditional Chinese, Simplified Chinese, Korean, Japanese
Display device 3.5-inch TFT color LCD
LCD Pixels 320 × 240
Indications Display colors 16.7 million
Life expectancy *1 50,000 hours at 25ºC
Backlight Brightness adjustment Provided
Screen saver Provided
Operation Touch Method Resistance film
interface screen Life expectancy *2 1,000,000 touch operations
External Ethernet 100BASE-TX/10BASE-T
interface SD card SDHC-compliant, Class 4 or higher recommended
DC power connection: 21.6 to 26.4 VDC
DC power connection:21.6 to 26.4 VDC (including ripple)
Power supply voltage (including ripple) AC adapter (manufactured by Sino-American Japan
Co., Ltd) connection: 100 to 240 VAC, 50/60 Hz
Ratings Battery connection: FQ-BAT1 Battery (1cell, 3.7 V)
Continuous operation on Battery *3 --- 1.5 h
Power consumption DC power connection: 0.2 A max. DC power connection: 0.2 A max.
Charging battery: 0.4 A max.
Operating: 0 to 50ºC Operating: 0 to 50ºC when mounted to DIN Track or panel
Ambient temperature range Storage: −25 to 65ºC Operation on Battery: 0 to 40ºC
(with no icing or condensation) Storage: −25 to 65ºC
(with no icing or condensation)
Environmental Ambient humidity range Operating and storage: 35% to 85% (with no condensation)
immunity Ambient atmosphere No corrosive gas
Vibration resistance (destruction) 10 to 150 Hz, single amplitude: 0.35 mm, X/Y/Z directions
8 min each, 10 times
Shock resistance (destruction) 150 m/s2 3 times each in 6 direction (up, down, right, left, forward, and backward)
Degree of protection IEC 60529 IP20 (when SD card cover, connector cap, or harness is attached)
Weight Approx. 270 g (without Battery and hand strap attached)
Materials Case: ABS
Accessories included with Touch Finder Touch Pen (FQ-XT), Instruction Manual
*1. This is a guideline for the time required for the brightness to diminish to half the initial brightness at room temperature and humidity. The life of the backlight is
greatly affected by the ambient temperature and humidity and will be shorter at lower or higher temperatures.
*2. This value is only a guideline. No guarantee is implied. The value will be affected by operating conditions.
*3. This value is only a guideline. No guarantee is implied. The value will be affected by the operating environment and operating conditions.
Item Model FQ-BAT1
Battery type Secondary lithium ion battery
Nominal capacity 1,800 mAh
Rated voltage 3.7 V
Ambient temperature range Operating: 0 to 40ºC
Storage: −25 to 65ºC (with no icing or condensation)
Ambient humidity range Operating and storage: 35% to 85% (with no condensation)
Charging method Charged in Touch Finder (FQ-D31). AC adapter (FQ-AC@) is required.
Charging time (See note 1.) 2h
Battery backup life (See note 2.) 300 charging cycles
Weight 50 g max.
Note: 1. This value is only a guideline. No guarantee is implied. The value will be affected by operating conditions
2. This is a guideline for the time required for the capacity of the Battery to be reduced to 60% of the initial capacity. No guarantee is implied.
The value will be affected by the operating environment and operating conditions.
System Requirements for TouchFinder for PC
The following Personal Computer system is required to use the software.
OS Microsoft Windows XP Home Edition/Professional SP2 or higher (See note 1.)
Microsoft Windows 7 Home Premium or higher (See note 1.)
CPU Core 2 Duo 1.06 GHz or the equivalent or higher
RAM 1GB min.
HDD 500 MB min. available space (See note 2.)
Monitor 1,024 × 768 dots min.
Note: 1. The Japanese and English versions support only 32-bit OS versions.
2. Available space is also required separately for data logging.
Dimensions (Unit: mm) 15
Code Reader (Dimensional drawings are provided here only for the products that have undergone design changes as of June 2012.)
Mounting with the FQ-XL Mounting Bracket Mounting with the FQ-XL2 Mounting Bracket
46 Mounting Bracket (65) 59
OPTICAL 5 (108)
AXIS 67 20±0.1
45 40 30 38.8
(108) Four-M4 1/4-20UNC
67 Polarizing Depth: 6 Depth: 6
Filter Attachment 32
Four machine screws
9 Plate (double pan-head set screws)
Cushion t1 Base
(See note 1.) 8 18 Mounting Hole Dimensions
38 Two, 4.5 dia.
(See note 2.)
Mounting Hole Dimensions
20±0.1 49 8
Two, 4.5 dia.
Tightening torque: 1.2 N.m
* Dimentions with the FQ-XL Mounting Bracket
Type Model Note 1. Note 2.
Narrow View, FQ-CR1@010F-M/-CR2@010F-M/ 11 57
Wide View FQ-CR1@100F-M/-CR2@0100F-M/ 3 49
FQ2-D30/-D31 Panel Mounting Adapter
95 (See note.)
116 85 (133.4)
35.5 52.9 85
Panel Cutout Dimensions
12.1 13.5 15 111±1
19.2 17.3 111±1 Panel
Note: Provided with FQ2-D31 only.
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments.
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of
sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR
PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON’S
ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO
CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF
PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate
catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer’s application or use
of the product.
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This
information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other
application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the
products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment,
and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A
WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED
USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of
OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some
specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your
application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or
proofreading errors, or omissions.
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without permission.
This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any
manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety.
Note: Do not use this document to operate the Unit.
OMRON Corporation Industrial Automation Company Authorized Distributor:
OMRON EUROPE B.V. OMRON ELECTRONICS LLC
Wegalaan 67-69-2132 JD Hoofddorp One Commerce Drive Schaumburg,
The Netherlands IL 60173-5302 U.S.A.
Tel: (31)2356-81-300/Fax: (31)2356-81-388 Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD. OMRON (CHINA) CO., LTD. © OMRON Corporation 2011 All Rights Reserved.
No. 438A Alexandra Road # 05-05/08 (Lobby 2), Room 2211, Bank of China Tower, In the interest of product improvement,
Alexandra Technopark, 200 Yin Cheng Zhong Road, specifications are subject to change without notice.
Singapore 119967 PuDong New Area, Shanghai, 200120, China CSM_14_1_0615
Tel: (65) 6835-3011/Fax: (65) 6835-2711 Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 Cat. No. Q186-E1-01 0811 (0811)
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
FQ-S10010F FQ-S10050F FQ-S10100F FQ-S10100N FQ-S15010F FQ-S15050F FQ-S15100F FQ-S15100N
FQ-S20010F FQ-S20050F FQ-S20100F FQ-S20100N FQ-S25010F FQ-S25050F FQ-S25100F FQ-S25100N FQ-
D30 FQ-D31 FQ-AC2 FQ-WN002 FQ-WD002