电子工程世界电子工程世界电子工程世界

关键词

搜索

型号

搜索
 

EP11RD1CME

器件型号:EP11RD1CME
器件类别:未分类   
厂商名称:ITT
厂商官网:http://www.ittcannon.com/
下载文档

器件描述

PUSHBUTTON SWITCH, SPDT, MOMENTARY, 0.02A, 20VDC, THROUGH HOLE-RIGHT ANGLE

按钮开关, 单刀双掷, 瞬态, 0.02A, 20VDC, 直角通孔

参数
最大直流触点电流0.0200 A
最大直流触点电压20 V
最大工作温度85 Cel
最小工作温度-30 Cel
最大交流触点电流0.0200 A
最大交流触点电压20 V
加工封装描述ROHS COMPLIANT
无铅Yes
欧盟RoHS规范Yes
状态TRANSFERRED
密封环氧树脂 TERMINAL SEALED
电气寿命30000 Cycle(s)
开关功能单刀双掷
端子涂层金 OVER 镍
制造商系列EP
控制阀PLUNGER
宽度8.13 mm
高度5.08 mm
长度或直径9.27 mm
安装特点直角通孔
开关动作瞬态
开关类型按钮开关
端子类型焊接

文档预览

C&K EP Series
Sealed Tiny Pushbutton Switches
Features/Benefits
Sealed against solder &
cleaning processes
Thru-hole and surface mount models
Snap-fitting actuator accepts
standard caps
Tape & reel packaging available
RoHS compliant models available
Typical Applications
Telecommunications and
networking equipment
Computers and peripherals
Instrumentation and controls
A
Pushbutton
Models Available
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @
20 V AC or DC max. See page A-11 for additional ratings.
ELECTRICAL LIFE: EP11, EP21 models: 60,000 make-and-break
cycles at full load. EP12 models: 30,000 cycles.
CONTACT RESISTANCE: Below 20 mΩ typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109
min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
DEGREE OF PROTECTION: IP57; Protection against harmful dust
deposit, full-scale voltage protection, temporary immersion.
PACKAGING: Surface mount switches standard in anti-static
tape and reel packaging per EIA 481-3, see page A-12 for
drawings and reel information. Tape and cover strip are
conductive for use near statically sensitive components,
consult Customer Service Center.
Materials
CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat
stabilized (UL 94V-0). SA surface mount: High temperature
material, glass filled nylon 4/6, flame retardant, heat
stabilized (UL 94V-0).
PLUNGER: Thermoplastic polyester or glass filled nylon (UL 94V-0),
with internal o-ring seal. SA surface mount: High temperature
material, glass filled nylon 4/6, flame retardant, heat stabilized
(UL 94V-0).
SWITCH SUPPORT: Brass, matte-tin plated.
CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. See page A-11 for additional
contact materials.
TERMINAL SEAL: Epoxy.
NOTE:
Any models supplied with Q, B, P, S, R or G contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE:
Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
CAUTION:
PC mounting layouts and pads as shown are designed to be compatible with the
latest equipment and reflow techniques. Care should be taken in the design and location of
PC lands to suit individual needs. Orientation relative to reflow direction may significantly
impact solder joint integrity.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-8 thru A-11. For additional options not shown in catalog, consult Customer Service Center. All
models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
Switch Function
EP11
SPST Off-Mom.
EP12
SPDT On-Mom.
EP21
DPST Off-Mom.
Plunger
S
.215" high
S1
.110" high
S2
.465" high
FP
Flush
R
Snap-fitting, .215 high
Bushing
D1
Unthreaded
Terminations
A
Right angle, PC thru-hole
C
PC Thru-hole
AV
Vertical right angle, PC thru-hole
AV3
Vertical right angle, snap-in, PC thru-hole
SA
Right angle, surface mount
SA1
Right angle, surface mount rear facing
V3
Vertical mount, v-bracket
V31
Vertical mount, v-bracket, snap-in
(EP11 & EP12 only)
W
Wire wrap
Seal
E
Epoxy
Contact Material
B
Gold
K
Gold, tin-lead
P
Gold, matte-tin
Q
Silver
M
Silver, tin-lead
S
Silver, matte-tin
G
Gold over silver
L
Gold over silver, tin-lead
R
Gold over silver, matte tin
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A–7
www.ittcannon.com
C&K EP Series
Sealed Tiny Pushbutton Switches
A
Pushbutton
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
POS. 2
CONNECTED TERMINALS
POS. 1
POS. 2
NO.
POLES
MODEL
NO.
C&K marking on opposite side
C&K marking on opposite side
SCHEMATIC
EP11
SP
OFF
MOM.
OPEN
1-3
SPST
EP12
ON
MOM.
2-1
2-3
SPDT
SPDT
Omit terminal 2 for
EP11 models.
Part number shown: EP12SD1CBE
Terminal Nos.
For Reference Only
DP
EP21
OFF
MOM.
OPEN
1-3,4-6
DPST
DPST
Terminal Nos.
For Reference Only
Part number shown: EP21SD1CBE
MOM. = Momentary
All models
with all options when ordered with G, L, M or Q contact material.
PLUNGER
S
.215" HIGH
S1
.110" HIGH
S2
.465" HIGH
FP
FLUSH PLUNGER
R
SNAP-FITTING
S1& S2 actuators are not available with EP12 & EP21 models or SA1 termination style.
FP & R actuators are not available with EP21 model or SA1 termination style.
NOTE:
Caps available for plunger options, see page A-12.
BUSHING
D1
UNTHREADED
NOTE:
Internal actuator o-ring standard.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A–8
www.ittcannon.com
C&K EP Series
Sealed Tiny Pushbutton Switches
TERMINATIONS
C
PC THRU-HOLE
SP
DP
SP
DP
A
W
WIRE WRAP
Pushbutton
PC MOUNTING
EP11 - Omit
center hole.
SP and DP
SP and DP
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
EP12SD1ABE
SPDT
EP11 Models:
omit terminal 2.
EP11 Models:
omit thru-hole 2.
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
EP21SD1ABE
DPST
AV
VERTICAL RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
EP12SD1AVBE
SPDT
NOTE:
Terminal bend radii and lead-in manufacturing option.
EP11 Models:
omit terminal 2.
EP11 Models:
omit hole 2.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A–9
www.ittcannon.com
C&K EP Series
Sealed Tiny Pushbutton Switches
A
Pushbutton
AV
VERTICAL RIGHT ANGLE, THRU-HOLE
PC MOUNTING
TERMINATIONS
EP21SD1AVBE
DPST
NOTE:
Terminal bend radii and lead-in manufacturing option.
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
PC MOUNTING
EP12SD1AV3BE
SPST
EP11 Models:
omit hole 2.
SA
RIGHT ANGLE, SURFACE MOUNT
PC MOUNTING
SMT
.320
(8,13)
EP12SD1SAPE
SPDT
.410 MAX
(10,41)
EP11 Models:
omit pad 2.
EP11 Models:
omit terminal 2.
Available with K and P contact materials only.
Not Available on DPST models.
SA1
RIGHT ANGLE, SURFACE MOUNT
PC MOUNTING
EP12SD1SA1BE
SPDT
SA1 is only available with B contact materials option + S plunger.
Not Available on DPST models.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A–10
www.ittcannon.com
C&K EP Series
Sealed Tiny Pushbutton Switches
TERMINATIONS
V3
V31
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
A
Pushbutton
EP11 Models:
omit centerhole.
V31 SNAP-IN
EP12SD1V3BE
SPDT
EP11 Models:
omit terminal 2.
V3
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
EP21SD1V3BE
DPST
CONTACT MATERIAL
OPTION
CODE
RoHS
COMPLIANT *
YES
NO
YES
YES
NO
YES
YES
NO
YES
RoHS
COMPATIBLE *
YES
YES
YES
YES
YES
YES
YES
YES
YES
GOLD OVER SILVER
2,3
SILVER
4,5
GOLD
1
CONTACT
MATERIAL
TERMINAL
PLATING
GOLD
1
TIN-LEAD
6
MATTE-TIN
7
SILVER
5
TIN-LEAD
6
MATTE-TIN
7
GOLD
3
TIN-LEAD
6
MATTE-TIN
7
LOW LEVEL/DRY
CIRCUIT OR POWER
0.4 VA MAX @ 20 V AC OR DC MAX. OR
1 AMP @ 120 V AC OR 28 V DC.
POWER
1 AMP @ 120 V AC OR 28 V DC.
LOW LEVEL/DRY CIRCUIT
0.4 VA MAX. @ 20 V AC OR DC MAX.
RATINGS
B
K
P
Q
M
S
G
L
R
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2
END CONTACTS: Coin silver, with gold plate over nickel plate.
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
6
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
7
TERMINALS: Copper alloy, with matte tin over nickel plate.
over nickel plate.
4
END CONTACTS: Coin silver, silver plated.
5
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
NOTE:
Any models supplied with Q, B P, S ,R or G contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
All models
with all options when ordered with G, L, M, S, R or Q contact material.
SEAL
E
EPOXY SEAL
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A–11
www.ittcannon.com
micro:bit 公开了硬件方案
近日,micro:bit开发板的硬件方案完全公开了,大家可以自己DIY了。 参考网站: http://tech.microbit.org/hardware/https://github.com/microbit-foundation/microbit-reference-design micro:bit公开了硬件方案...
dcexpert MicroPython开源版块
中断里进入lpm3睡眠不了?
中断里进入lpm3睡眠不了?反而复位了?什么原因呢?中断里进入lpm3睡眠不了?...
??? 微控制器 MCU
独立光伏电源系统设计方法
独立光伏电源系统设计方法经过光伏工作者们坚持不懈的努力,太阳能电池的生产技术不断得到提高,并且日益广泛地应用于各个领域。特别是邮电通信方面,由于近年来通信行业的迅猛发展,对通信电源的要求也越来越高,所以稳定可靠的太阳能电源被广泛使用于通信领域。而如何根据各地区太阳能辐射条件,来设计出既经济而又可靠的光伏电源系统,这是众多专家学者研究已久的课题,而且已有许多卓越的研究成果,为我国光伏事业的发展奠定了坚实的基础。笔者在学习各专家的设计方...
zbz0529 电源技术
协议驱动的简单问题!谁帮我解决我送150分!急!
链接是我在网络版块提的问题!在这里也问问大家!各位大虾帮我!150分,不够还可以加! http://topic.eeworld.net/u/20080124/10/3e66c379-f123-4581-9a21-06514d1350d6.html协议驱动的简单问题!谁帮我解决我送150分!急!...
lizy927 嵌入式系统
RS485线上串入交流电?一直没找到原因?
RS485线上串入交流电?一直没找到原因?最近测试有一路RS485线路上元器件全部打坏,芯片击穿。最后测试发现RS485线上串入交流电,但是电源是隔离的,一直没找到串入交流电的原因? RS485线上串入交流电?一直没找到原因?...
adherevictor 测试/测量

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
搜索索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
器件入口   0A 7i AY FB IW JJ JT MC NO RJ SC SL XQ Y2 ZO

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2022 EEWORLD.com.cn, Inc. All rights reserved