Marketing Bulletin
DATE: January 5, 2004
TO: Affected Customers
FROM: Mark Stoner
RE: Product Termination
To all concerned parties,
This bulletin is to notify all customers of the termination of the following Ecliptek series
effective November 11th, 2003:
Series Description Recommended Replacement
EC51 5V 14 Pin DIP TCXO, HCMOS EB51F3
ES51 5V 14 Pin DIP TCXO, Sinewave ES51F3
EC53 3.3V 14 Pin DIP TCXO, HCMOS EB52F3
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after February 1st, 2004, with
deliveries to conclude by July 1st 2004.
If there are any questions pertaining to this bulletin, please fell free to contact me.
Thank you for your cooperation.
Best Regards,
Mark W. Stoner
Director of Marketing
Ecliptek Corporation
3545 CADILLAC AVENUE COSTA MESA, CA 92626-1401 (714) 433-1200 Fax (714) 433-1234
STANDARD SPECIFICATIONS
Frequency Range: 9.600MHz to 35.000MHz
Frequency Stability: See Table 1 for Maximum Values (Inclusive of Operating Temperature Range)
vs. Input Voltage (5%) 0.3ppm Maximum
vs. Load (2k//2pF) 0.3ppm Maximum
vs. Aging (at 25C) 1ppm/year Maximum
Operating/Storage Temp. Range See Table 1 for Operating Temperature Range / Storage -40C to +85C
Supply Voltage 5.0Vdc 5%
Input Current 1.5mA Max. 20.000MHz, 2.0mA Max. 20.001MHz to 29.999MHz, 3.0mA Max. 30.000MHz
Output Voltage 1.0Vp-p Minimum
Load Drive Capabillity 10kOhms // 10pF
Internal Trim (Top of Can) 3ppm Minimum
Pin 1 Control Voltage No Connect (Pin 1 not present)
Blank
V 2.5Vdc 2.0Vdc, Positive Transfer Charateristic
Frequency Deviation 5ppm Minimum over Control Voltage
Typical Phase Noise -85dBc/Hz at 10Hz Offset, -115dBc/Hz at 100Hz Offset, -135dBc/Hz at 1kHz Offset, -140dBc/Hz at 10kHz Offset,
-145dBc/Hz at 100kHz Offset, -150dBc/Hz at 1MHz Offset
ENVIRONMENTAL & MECHANICAL
Fine Leak Test: MIL-STD-883, Method 1014, Condition A Solderability: MIL-STD-883, Method 2002
Gross Leak Test: MIL-STD-883, Method 1014, Condition C Temperature Cycling: MIL-STD-883, Method 1010
Resistance to Soldering Heat: MIL-STD-202, Method 210
Mechanical Shock: MIL-STD-202, Method 213, Condition C Resistance to Solvents: MIL-STD-202, Method 215
Vibration: MIL-STD-883, Method 2007, Condition A
Lead Integrity: MIL-STD-883, Method 2004
TABLE 1: PART NUMBERING CODES
OPERATING FREQUENCY STABILITY
TEMPERATURE X Denotes availability from 9.600MHz to 25.000MHz
Y Denotes availability for any valid frequency.
MARKING GUIDE
Range Code 15 20 25 30 35 50 Code
1.5ppm 2.0ppm 2.5ppm 3.0ppm 3.5ppm 5.0ppm Range (Line #1) ECLIPTEK
0C to +50C A Y Y Y Y Y Y
-10C to +60C B Y Y Y Y Y Y
-20C to +70C C X Y Y Y Y Y (Line #2) ES51 00 X Y
-30C to +60C D X Y Y Y Y Pin 1 Connection
Blank = No Connect (pin 1 not present)
-30C to +75C E X X Y Y Y V = Control Voltage 2.5Vdc 2.0Vdc
-35C to +80C F X X Y Y Positive Transfer Characteristic
-40C to +85C G X X Y Operating Temperature
Code Per Table 1
PART NUMBERING GUIDE
Frequency Stability
ES51 25 E V - 12.800M Code Per Table 1
Frequency (Line #3) XX.XXXM ECLIPTEK
Pin 1 Connection
Blank = No Connect (pin 1 not present) Frequency ES5100XY
V = Voltage Control XX.XXXM
(Line #4) XX Y ZZ
Operating Temperature Range Code Per Table 1 XXYZZ
Week of Year
Frequency Stability Code Per Table 1 Last Digit of Year
Ecliptek Manufacturing Code
3.5 0.5 4.5 0.3 5.0 1.0 NOTE: Marking shall conform to conditions
4.0 0.3 listed in TQC41-001-000.
Ground (2)
11.7 0.5 7.62 0.30
Output (3) 1.2 +0/-0.5
0.50 0.05 SPECIFICATION CONTROL DRAWING
18.3 0.5 Drawing Number
Control 4.0 0.3 CSC06-020-000
Voltage (1) 2.5 Title
0.3
4.5mm HEIGHT THRU-HOLE SINEWAVE TCXO
NOTE: Pin 1 is not present Revision Effectivity Date
when Control Voltage is
specified as a "No Connect" E 05-02-03
Supply ALL DIMENSIONS ECN Number PAGE 1 OF 2
Voltage (4) IN MILLIMETERS
8396
15.24 0.40
Approved By
Date Released By Date
STANDARD SPECIFICATIONS
Frequency Range: 9.600MHz to 35.000MHz
Frequency Stability: See Table 1 for Maximum Values (Inclusive of Operating Temperature Range)
vs. Input Voltage (5%) 0.3ppm Maximum
vs. Load (2pF) 0.3ppm Maximum
vs. Aging (at 25C) 1ppm/year Maximum
Operating/Storage Temp. Range See Table 1 for Operating Temperature Range / Storage -40C to +85C
Supply Voltage 5.0Vdc 5%
Input Current 30mA Maximum
Output Voltage Logic High 2.4Vdc Min. w/TTL Load, VDD-0.5Vdc Min. w/HCMOS Load
Output Voltage Logic Low 0.4Vdc Max. w/TTL Load, 0.5Vdc Max. w/HCMOS Load
Rise/Fall Time 10nSec (0.4Vdc to 2.4Vdc w/TTL Load, 20% to 80% of waveform w/HCMOS Load)
Duty Cycle 50% 10% (@1.4Vdc w/TTL Load, @50% of waveform w/HCMOS Load)
Load Drive Capabillity 10TTL Load or 15pF HCMOS Load Maximum
Internal Trim (Top of Can) 3ppm Minimum
Pin 1 Control Voltage
Blank No Connect (Pin 1 not present)
2.5Vdc 2.0Vdc, Positive Transfer Charateristic
V 5ppm Minimum over Control Voltage
Frequency Deviation -85dBc/Hz at 10Hz Offset, -115dBc/Hz at 100Hz Offset, -135dBc/Hz at 1kHz Offset, -140dBc/Hz at 10kHz Offset,
Typical Phase Noise -145dBc/Hz at 100kHz Offset, -150dBc/Hz at 1MHz Offset
ENVIRONMENTAL & MECHANICAL
Fine Leak Test: MIL-STD-883, Method 1014, Condition A Solderability: MIL-STD-883, Method 2002
Gross Leak Test: MIL-STD-883, Method 1014, Condition C Temperature Cycling: MIL-STD-883, Method 1010
Mechanical Shock: MIL-STD-202, Method 213, Condition C Resistance to Soldering Heat: MIL-STD-202, Method 210
Vibration: MIL-STD-883, Method 2007, Condition A Resistance to Solvents: MIL-STD-202, Method 215
Lead Integrity: MIL-STD-883, Method 2004
TABLE 1: PART NUMBERING CODES
OPERATING FREQUENCY STABILITY MARKING GUIDE
TEMPERATURE X Denotes availability from 9.600MHz to 25.000MHz
Y Denotes availability for any valid frequency. (Line #1) ECLIPTEK
Range Code 15 20 25 30 35 50 Code (Line #2) EC51 00 X Y
1.5ppm 2.0ppm 2.5ppm 3.0ppm 3.5ppm 5.0ppm Range Pin 1 Connection
Blank = No Connect (pin 1 not present)
0C to +50C A Y Y Y Y Y Y V = Control Voltage 2.5Vdc 2.0Vdc
-10C to +60C B Y Y Y Y Y Y Positive Transfer Characteristic
Operating Temperature
-20C to +70C C X Y Y Y Y Y Code Per Table 1
Frequency Stability
-30C to +60C D X Y Y Y Y Code Per Table 1
-30C to +75C E X X Y Y Y
-35C to +80C F X X Y Y
-40C to +85C G X X Y
PART NUMBERING GUIDE
EC51 25 E V - 12.800M (Line #3) XX.XXXM ECLIPTEK
Frequency Frequency EC5100XY
XX.XXXM
Pin 1 Connection (Line #4) XX Y ZZ
Blank = No Connect (pin 1 not present) XXYZZ
V = Voltage Control Week of Year
Last Digit of Year
Operating Temperature Range Code Per Table 1 Ecliptek Manufacturing Code
Frequency Stability Code Per Table 1
3.5 0.5 4.5 0.3 5.0 1.0 NOTE: Marking shall conform to conditions
4.0 0.3 listed in TQC41-001-000.
Ground (2)
11.7 0.5 7.62 0.30
Output (3) 1.2 +0/-0.5 SPECIFICATION CONTROL DRAWING
0.50 0.05 Drawing Number
18.3 0.5 CSC06-010-000
Control 4.0 0.3 Title
Voltage (1) 2.5 4.5mm HEIGHT THRU-HOLE HCMOS/TTL TCXO
0.3
Revision Effectivity Date
NOTE: Pin 1 is not present
when Control Voltage is E 05-02-03
specified as a "No Connect"
Supply ECN Number PAGE 1 OF 2
Voltage (4) ALL DIMENSIONS
IN MILLIMETERS 8395
15.24 0.40 Approved By Date Released By Date
STANDARD SPECIFICATIONS
Frequency Range: 9.600MHz to 35.000MHz
Frequency Stability: See Table 1 for Maximum Values (Inclusive of Operating Temperature Range)
vs. Input Voltage (5%) 0.3ppm Maximum
vs. Load (2pF) 0.3ppm Maximum
vs. Aging (at 25C) 1ppm/year Maximum
Operating/Storage Temp. Range See Table 1 for Operating Temperature Range / Storage -40C to +85C
Supply Voltage 3.3Vdc 5%
Input Current 10mA Maximum < 20.000MHz, 20mA Maximum > 20.000MHz
Output Voltage Logic High 2.7Vdc Minimum
Output Voltage Logic Low 0.5Vdc Maximum
Rise/Fall Time 10nSec. Maximum (20% to 80% of waveform)
Duty Cycle 50% 10% (@50% of waveform)
Load Drive Capabillity 15pF HCMOS Load Maximum
Internal Trim (Top of Can) 3ppm Minimum
Pin 1 Control Voltage
Blank No Connect (Pin 1 not present)
1.65Vdc 1.35Vdc, Positive Transfer Charateristic
V 5ppm Minimum over Control Voltage
Frequency Deviation -85dBc/Hz at 10Hz Offset, -115dBc/Hz at 100Hz Offset, -135dBc/Hz at 1kHz Offset, -140dBc/Hz at 10kHz Offset,
Typical Phase Noise -145dBc/Hz at 100kHz Offset, -150dBc/Hz at 1MHz Offset
ENVIRONMENTAL & MECHANICAL
Fine Leak Test: MIL-STD-883, Method 1014, Condition A Solderability: MIL-STD-883, Method 2002
Gross Leak Test: MIL-STD-883, Method 1014, Condition C Temperature Cycling: MIL-STD-883, Method 1010
Mechanical Shock: MIL-STD-202, Method 213, Condition C Resistance to Soldering Heat: MIL-STD-202, Method 210
Vibration: MIL-STD-883, Method 2007, Condition A Resistance to Solvents: MIL-STD-202, Method 215
Lead Integrity: MIL-STD-883, Method 2004
TABLE 1: PART NUMBERING CODES MARKING GUIDE
OPERATING FREQUENCY STABILITY (Line #1) ECLIPTEK
TEMPERATURE X Denotes availability from 9.600MHz to 25.000MHz
Y Denotes availability for any valid frequency. (Line #2) EC53 00 X Y
Range Code 15 20 25 30 35 50 Code Pin 1 Connection
Blank = No Connect (pin 1 not present)
1.5ppm 2.0ppm 2.5ppm 3.0ppm 3.5ppm 5.0ppm Range V = Control Voltage 1.65Vdc 1.35Vdc
0C to +50C A Y Y Y Y Y Y Positive Transfer Characteristic
Operating Temperature
-10C to +60C B Y Y Y Y Y Y Code Per Table 1
Frequency Stability
-20C to +70C C X Y Y Y Y Y Code Per Table 1
-30C to +60C D X Y Y Y Y
-30C to +75C E X X Y Y Y
-35C to +80C F X X Y Y
-40C to +85C G X X Y
PART NUMBERING GUIDE (Line #3) XX.XXXM ECLIPTEK
EC53 25 E V - 12.800M Frequency EC5300XY
XX.XXXM
Frequency
XXYZZ
Pin 1 Connection
Blank = No Connect (pin 1 not present) (Line #4) XX Y ZZ
V = Voltage Control
Week of Year
Operating Temperature Range Code Per Table 1 Last Digit of Year
Frequency Stability Code Per Table 1 Ecliptek Manufacturing Code (Per TEN02-001-000)
3.5 0.5 4.5 0.3 5.0 1.0 NOTE: Marking shall conform to conditions
listed in TQC41-001-000.
4.0 0.3
11.7 0.5
1.2 +0/-0.5 SPECIFICATION CONTROL DRAWING
0.50 0.05
Drawing Number
18.3 0.5
CSC06-110-000
Control 4.0 0.3 Ground (2) Title
7.62 0.30
Voltage (1) 2.5
Output (3)
0.3 4.5mm THRU-HOLE 3.3Vdc HCMOS/TTL TCXO
NOTE: Pin 1 is not present Revision Effectivity Date
when Control Voltage is C 05-02-03
specified as a "No Connect" ECN Number
Supply ALL DIMENSIONS 8400 PAGE 1 OF 2
Voltage (4)
15.24 0.40 IN MILLIMETERS Approved By Date Released By Date
CLASS/SUBCLASS: OS62
This datasheet has been downloaded from:
www.EEworld.com.cn
Free Download
Daily Updated Database
100% Free Datasheet Search Site
100% Free IC Replacement Search Site
Convenient Electronic Dictionary
Fast Search System
www.EEworld.com.cn
All Datasheets Cannot Be Modified Without Permission
Copyright Each Manufacturing Company
电子工程世界
