Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated,
AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Overview
KEMET’s 900 encapsulated radial leaded ceramic disc With a working voltage of 440 VAC in line-to-line (Class X)
capacitors are specifically designed for interference-sup- and 300 VAC in line-to-ground (Class Y) applications, these
pression AC line filtering applications. Having internation- safety capacitors meet the impulse test criteria outlined in
ally recognized safety certifications, these capacitors are IEC Standard 60384. Meeting subclass X1 and Y2 require-
well-suited for applications that require keeping potentially ments, these devices are certified to withstand impulses up
disruptive or damaging line transients and EMI out of sus- to 4 KV (X1) and 5 KV (Y2) respectively. These encapsulated
ceptible equipment. They are also an ideal solution when devices also meet the flame test requirements outlined in UL
needing to suppress line disturbances at the source. Standard 94V–0.
Safety Certified Capacitors are classified as either X and/
or Y capacitors. Class X capacitors are primarily used in
line-to-line (across-the-line) applications. In this applica-
tion, there is no danger of electric shock to humans should
the capacitor fail, but could result in a risk of fire. The class
Y capacitor is primarily used in line-to-ground (line by-pass)
applications. In this application, failure of the capacitor
could lead to danger of electric shock.
Click image above for interactive 3D content
Ordering Information Open PDF in Adobe Reader for full functionality
C9 7 1 U 472 M Z W D A A 7317
Ceramic Body Lead Spec. Capacitance Capacitance Rated Dielectric/ Design Lead Failure Packaging
Series Diameter Spacing1,2,4 Code (pF) Tolerance Voltage Temp. Char. Config.1,3,4 Rate (C-Spec)
C9 = 0 = 7.0 mm 7 = 7.5 mm U= Two J = ±5% Z = X1 S = SL D= A = Straight A= See
Ceramic 1 = 8.0 mm 1 = 10.0 Safety significant K = ±10% 440 VAC Y = Y5P Disc B = Vertical N/A "Packaging
900 2 = 9.0 mm mm digits and M = ±20% /Y2 300 W = Y5U Kink C-Spec
Series 3 = 10.0 mm number of VAC V = Y5V C = Outside Ordering
4 = 11.0 mm zeroes Kink Options
6 = 13.0 mm D = Inside Table"
8 = 15.0 mm Kink below
1 Due to a high risk of arcing, "Inside Kink" lead configuration cannot be combined with the 5 mm lead spacing option. The "Inside Kink" option is only
available on capacitors with lead spacing of 7.5 mm or greater. A potential for arcing may exist when combining the "Inside Kink" lead configuration
with a 7.5mm lead spacing option, especially in high humidity environments and/or when exposure to voltages and transients may impact creepage and
clearance requirements.
2 Capacitor body diameter will limit available lead spacing and packaging options. See "Dimensions" and "Product Ordering Codes and Ratings" sections
of this document to determine availability.
3 "Vertical Kink", "Outside Kink" and "Inside Kink" lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead
length is only available on capacitors with straight leads (lead configuration ordering code "A"). For nonstandard lead length inquiries, please contact
KEMET.
4 Bulk packaging lead length availability is dependent upon "Lead Configuration" and "Lead Spacing." See "Dimensions" section of this document to
verify availability of a specific lead length option. For nonstandard lead length inquiries, please contact KEMET.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 1
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Packaging C-Spec Ordering Options Table
Packaging Type Lead Length Packaging
(mm)2,3 Ordering Code (C-Spec)
Ammo Pack 20.0+1.5/−1.0 (straight leads) 7317
18.0+2.0/−0 (preformed leads1)
3.0±1.0 WL30
3.5±1.0 WL35
Bulk Bag 4.0±1.0 WL40
4.5±1.0 WL45
5.0±1.0 WL50
20.0 minimum4 WL20
1 Preformed (crimped) lead configurations include vertical kink, outside kink and inside kink. See "Lead Configurations" and "Ordering Information"
sections of this document for further details.
2 "Vertical Kink", "Outside Kink" and "Inside Kink" lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead
length is only available on capacitors with straight leads (lead configuration ordering code "A"). For nonstandard lead length inquiries, please contact
KEMET.
3 For nonstandard lead length inquiries, please contact KEMET.
4 Lead length of 20.0 mm minimum only available for straight leads.
Benefits
• Safety standard recognized (IEC 60384–14)
• Reliable operation up to 125°C
• Class X1/Y2
• 7.5 mm and 10 mm lead spacing
• Lead (Pb)-free and RoHS Compliant
• Halogen-free
• Capacitance offerings ranging from 10 pF up to 10 nF
• Available capacitance tolerances of ±5%, ±10% and ±20%
• High reliability
• Preformed (crimped) or straight lead configurations
• Non-polar device, minimizing installation concerns
• Encapsulation meets flammability standard UL 94V–0
Applications
Typical applications include:
• Line-to-line (Class X) filtering
• Line-to-ground (Class Y) filtering
• Antenna coupling
• Primary and secondary coupling (switching power supplies)
• Line disturbances suppression (motors and motor controls, relays, switching power supplies, and inverters)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 2
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Lead Configurations
Straight Vertical Kink Outside Kink Inside Kink1
D T D T D T D T
3.0 3.0 3.0 3.0
Maximum Maximum Maximum Maximum
4.0 Maximum 5.0 Maximum 5.0 Maximum
LL
F F LL F LL F LL
S S S S
1 Due to a high risk of arcing, the "Inside Kink" lead configuration option cannot be combined with 5 mm lead spacing ("S" dimension above). The "Inside
Kink" option is only available on devices with lead spacing of 7.5 mm or 10 mm.
Dimensions – Millimeters
Lead S Lead D T e ØF
Lead Configuration Lead Spacing Body Body Lead Lead
Configuration Ordering Code1 Spacing2 Tolerance Diameter2 Thickness Meniscus Diameter
7.5 ±1.0
Straight A
10.0 ±1.0
Vertical Kink 7.5 ±1.0
(Preformed) B See Table 1 -
10.0 ±1.0 3.0
"Product Ordering Codes maximum 0.55±0.1
Outside Kink 7.5 ±1.0 and Ratings"
(Preformed) C
10.0 ±1.0
Inside Kink 7.5 ±1.0
(Preformed) D
10.0 ±1.0
1 Lead Configuration is identified in the 13th character of the ordering code. See "Lead Configuration" and "Ordering Information" sections of this
document for further details.
2 Body diameter of capacitor will limit available lead spacing and packaging options. See "Product Ordering Codes and Ratings" sections of this
document for further details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 3
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Approval Standard and Certification No.
Safety Standard Standard No. Subclass Working Voltage Certificate No.
VDE IEC 60384–14 X1 440 VAC 40036415
(ENEC) Y2 300 VAC
UL UL 60384–14 and X1 440 VAC E356389
CAN/CSA E60384–14 Y2 300 VAC
These devices are VDE/ENEC and UL recognized for antenna coupling and AC line-to-line (Class X) and line-to-ground (Class Y) applications per
IEC60384–14 and UL 60384–14.
Environmental Compliance
These devices are Halogen free and RoHS Compliant. They meet all requirements set forth by both EU and China RoHS
directives.
General Specifications/Performance Characteristics
Dielectric/Temperature Characteristic SL Y5P Y5U Y5V
Operating Temperature Range: −40°C to +125°C
Capacitance Change with Reference to +25°C −1,000 ~ +350 ppm/ ±10% +20%/−55% ~ +30%/−80%
and 0 VDC Applied (TCC): ºC
Dielectric Withstanding Voltage 2,600 VAC
(7.5 mm and 10 mm Lead Spacing) (60±5 seconds at 25ºC)
30 pF and above:
Quality Factor (Q) ≥ 1,000 See “Dissipation Factor”
Below 30 pF: ≥ 400
+(20xC)*
Dissipation Factor (tanδ) at +25ºC1 See “Quality Factor” 2.50% 2.50% 5.0%
Insulation Resistance (IR) Limit at +25°C 10,000 MΩ Minimum
(500 VDC applied for 60±5 seconds at 25°C)
*C = Nominal capacitance
1 Capacitance and Dissipation Factor (DF) measured under the following conditions:
SL: 1 MHz ± 100 kHz and 1.0 ±0.2 Vrms
X5P, Y5U and Y5V: 1 kHz ± 50 Hz and 1.0 ±0.2 Vrms
Note: When measuring capacitance, it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known
as Automatic Level Control (ALC). The ALC feature should be switched to "ON."
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 4
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Table 1 – Product Ordering Codes and Ratings
Dimensions (mm) Lead Spacing
Dielectric/ KEMET Capacitance Body Body
Temp. Part Number Capacitance Tolerance Diameter Thickness Lead Bulk Ammo
Char. (Maximum) (Maximum) Diameter Packaging Packaging
C90(1)U100JZSD(2)A(3) 10 pF
C90(1)U120JZSD(2)A(3) 12 pF
C90(1)U150JZSD(2)A(3) 15 pF
C90(1)U180JZSD(2)A(3) 18 pF
C90(1)U200JZSD(2)A(3) 20 pF
C90(1)U220JZSD(2)A(3) 22 pF
C90(1)U240JZSD(2)A(3) 24 pF
C90(1)U270JZSD(2)A(3) 27 pF 7.0
C90(1)U300JZSD(2)A(3) 30 pF
C90(1)U330JZSD(2)A(3) 33 pF 7.5 mm
SL C90(1)U360JZSD(2)A(3) 36 pF ±5% 5.0 0.55 ±0.1 or
C90(1)U390JZSD(2)A(3) 39 pF 10 mm
C90(1)U470JZSD(2)A(3) 47 pF
C90(1)U500JZSD(2)A(3) 50 pF
C90(1)U510JZSD(2)A(3) 51 pF
C91(1)U560JZSD(2)A(3) 56 pF
C91(1)U620JZSD(2)A(3) 62 pF 8.0
C91(1)U680JZSD(2)A(3) 68 pF
C91(1)U750JZSD(2)A(3) 75 pF
C92(1)U820JZSD(2)A(3) 82 pF 9.0
C93(1)U101JZSD(2)A(3) 100 pF 10.0
C90(1)U101KZYD(2)A(3) 100 pF
C90(1)U151KZYD(2)A(3) 150 pF
C90(1)U221KZYD(2)A(3) 220 pF 7.0
C90(1)U331KZYD(2)A(3) 330 pF 7.5 mm
Y5P C90(1)U471KZYD(2)A(3) 470 pF ±10% 5.0 0.55 ±0.1 or
C91(1)U561KZYD(2)A(3) 560 pF 8.0 10 mm
C91(1)U681KZYD(2)A(3) 680 pF
C92(1)U821KZYD(2)A(3) 820 pF 9.0
C92(1)U102KZYD(2)A(3) 1,000 pF
C90(1)U102MZWD(2)A(3) 1,000 pF 7.0
C92(1)U152MZWD(2)A(3) 1,500 pF 9.0 7.5 mm
Y5U C92(1)U222MZWD(2)A(3) 2,200 pF ±20% 5.0 0.55 ±0.1 or
C94(1)U332MZWD(2)A(3) 3,300 pF 11.0 10 mm
C96(1)U392MZWD(2)A(3) 3,900 pF 13.0
C96(1)U472MZWD(2)A(3) 4,700 pF
C90(1)U102MZVD(2)A(3) 1,000 pF
C90(1)U152MZVD(2)A(3) 1,500 pF 7.0
C90(1)U222MZVD(2)A(3) 2,200 pF 7.5 mm
Y5V C92(1)U332MZVD(2)A(3) 3,300 pF ±20% 9.0 5.0 0.55 ±0.1 or
C94(1)U392MZVD(2)A(3) 3,900 pF 11.0 10 mm
C94(1)U472MZVD(2)A(3) 4,700 pF
C96(1)U682MZVD(2)A(3) 6,800 pF 13.0
C98(1)U103MZVD(2)A(3) 10,000 pF 15.0
KEMET Part Number Capacitance Capacitance Body Diameter Body Thickness Lead Diameter Lead Spacing
Tolerance (Maximum) (Maximum)
(1) To properly complete ordering code, insert the one-digit numeric code to reflect required lead spacing: (Note that select capacitance values and
packaging options may limit lead spacing availability. See table above to verify availability.)
7 = 7.5 mm
1 = 10.0 mm
(2) To properly complete ordering code, insert the one-digit character code to reflect the required lead configuration: (See "Lead Configuration" section
of this document, page 2, for further details.)
A = Straight
B = Vertical Kink
C = Outside Kink
D = Inside Kink
(3) To properly complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See "Dimensions" section of
this document, page 2, for available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 5
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Table 2 – Performance & Reliability: Test Methods and Conditions
Item Specification Test Method
Operating Temperature Range −40ºC to +125ºC
Between lead No failures The capacitor shall not be damaged when 2,600 VAC(rms) is
wires applied between the lead wires for 60 seconds.
The terminals (leads) of the capacitor
shall be connected together. A metal foil
Dielectric is tightly wrapped around the body of the
Strength capacitor at a distance of about 3 to 4 mm Metal
Body Insulation No failures from each terminal. The capacitor is then Foil about
inserted into a container filled with metal 3 to 4 mm
balls approximately 1 mm in diameter. 2,600 Metal
VAC(rms) is applied for 60 seconds between Balls
the capacitor lead wires and metal balls.
Insulation Resistance (IR) 10,000 MΩ minimum The insulation resistance shall be measured with 500±50 VDC
applied after 60±5 seconds of charging.
Capacitance Within specified tolerance
Temperature Specification
Characteristics
Y5P, Y5U DF ≤ 2.5% Y5P, Y5U and Y5V: Capacitance is measured at 1 kHz ±20% and 5
Y5V DF ≤ 5.0% Vrms or less. (20±2°C)
Dissipation Factor (DF) or Q SL: Capacitance is measured at 1 MHz ±20% and 1.0±0.2 Vrms
SL ≥ 30 pF: Q ≥ 1000 (25°C)
< 30 pF: Q ≥ 400
+(20 x C)
C = Nominal
capacitance
A capacitance measurement is made at each step specified:
Temperature Capacitance Step Temperature
Characteristics Change
1 +20±2ºC
Y5P Within ±10% 2 −25±2ºC
Temperature Characteristics Y5U Within +20%/−55% 3 +20±2ºC
Y5V Within 4 +85±2ºC
~+30%/−80% 5 +20±2ºC
SL −1,000 ~+350 Pre-treatment:
ppmºC Capacitor is stored at 85±2ºC for 1 hour and then placed at room
(+20ºC ~+85ºC) condition1 for 24±2 hours before measurement.
With the termination in its normal position, the specimen is held
Lead wire or capacitor body shall not by its body in such a manner that the axis of the termination is
Tensile break. vertical; a tensile force of 10 N is applied to the termination in the
direction of its axis and acting in a direction away from the body
of the specimen.
Terminal With the termination in its normal position, the specimen is held
by its body in such a manner that the axis of the termination is
Strength vertical; a mass force of 5 N is then suspended from the end of
Lead wire or capacitor body shall not the termination. The body of the specimen is then inclined within
Bending break. a period of 2 to 3 seconds, through an angle of approximately 90°
in the vertical plane and then resumed to its initial position over
the same period of time; this operation constitutes one bend.
One bend immediately followed by a second bend in the opposite
direction.
1 “ Room Condition” is defined as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 6
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Table 2 – Performance & Reliability: Test Methods and Conditions cont'd
Item Specification Test Method
Lead wire should have a uniform coating The lead wire of the capacitor is dipped into molten solder for
5±0.5 seconds. The depth of immersion is up to 1.5 mm
Solderability of solder in the axial direction and over (+5/−0 mm) from the root of lead wires.
3/4 of its circumference. Solder Temperature: Lead free solder (Sn-3Ag – 0.5Cu)
245°C ±5°C.
Appearance No visual defect As shown in the figure below, the lead wires are immersed in
IR 1,000 MΩ molten solder up to 1.5 mm (+5/−0 mm) from the end of the
epoxy meniscus (root of lead wire).
Dielectric Per item 1 Duration/Solder Temperature: 3.5±0.5 seconds/350°C ±10°C or
Strength 10±1 seconds/260°C ±5°C
Thermal Capacitor
Soldering Effect Screen
1.5 to
(Non-Preheat) 2.0 mm
Y5P, Y5U and Y5V: Within ±10% Molten
Capacitance SL: Within ±2.5% or ±0.25 pF, whichever Solder
is larger. Pre-treatment: Capacitor is stored at 85°C ±2°C for 1 hour and
then placed at room condition1 for 24 ±2 hours before initial
measurements.
Post-treatment: Capacitor is stored for 1 to 2 hours at room
condition1.
Appearance No visual defect Capacitor is stored at 120°C +0/−5°C for 60 +0/−5 seconds.
IR 1,000 MΩ Then, as shown in the figure below, the lead wires are immersed
in molten solder up to 1.5 mm (+5/-0mm) from the end of the
Dielectric Per item 1 epoxy meniscus (root of lead wire).
Strength Duration/Solder Temperature: 7.5 +0/−1 seconds/260°C ±5°C
Thermal Capacitor
Soldering Effect Screen
1.5 to
(Preheat) 2.0 mm
Y5P, Y5U and Y5V: Within ±10% Molten
Capacitance SL: Within ±2.5% or ±0.25 pF, whichever Solder
is larger. Pre-treatment: Capacitor is stored at 85°C ±2°C for 1 hour and
then placed at room condition1 for 24 ±2 hours before initial
measurements.
Post-treatment: Capacitor is stored for 1 to 2 hours at room
condition1.
Appearance No visual defect Steady State Humidity: Load Humidity:
Temperature Capacitance
Characteristics Change
Y5P Within ±10%
Capacitance Y5U Within ±20%
Y5V Within ±30%
SL Within ±2.5% or 90 to 95% humidity at 40°C 90 to 95% humidity at 40°C
±0.25 pF, whichever ±2°C for 500 ±12 hours. ±2°C for 500 ±12 hours with
Biased Humidity is larger. full rated voltage applied.
Y5P and Y5U: 5.0% maximum Post Treatment: Post Treatment:
DF Capacitor is stored for 1 to 2 Capacitor is stored for 1 to 2
Y5V: 7.5% maximum hours at room condition1. hours at room condition1.
SL: Less than 30 pF:
Q Q ≥ 100 + 10 × C/3
More than 30 pF: Q ≥ 200
C = Nominal capacitance
IR Y5P, Y5V and Y5U: 3,000 MΩ minimum
SL: 1,000 MΩ minimum
Dielectric No failures
Strength
1 “Room Condition” is defined as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 7
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Table 2 – Performance & Reliability: Test Methods and Conditions cont'd
Item Specification Test Method
Appearance No visual defect Impulse Voltage: Each individual capacitor is subjected to three 5
kv impulses prior to life testing.
Capacitance Y5P, Y5V and Y5U: Within ±20% tr
SL: Within ±3 or ±0.3 pF, Vp UPR Cx td
Change whichever is larger. Voltage 0.9Vp (uF) (uS) (uS)
UPP 0.01 1.2 46
IR 3,000 MΩ minimum 0.1 1.5 47
SL: 1,000 MΩ minimum 0.5Vp
High
Temperature
Life
Dielectric tr td Time
Strength No failures Capacitors are placed in a circulating air oven for a period of
1,000 hours. The air in the oven is maintained at a temperature of
125°C ±2 throughout the test. The capacitors are subjected to AC
510 Vrms. Each hour the voltage is increased to 1,000 Vrms for
0.1 seconds.
The capacitor is exposed to a flame for 15 seconds and then
The capacitor flame extinguishes as removed for 15 seconds. This test is repeated for 5 cycles.
follows: Capacitor
Cycle Time Flame
Flame Test 76
1~4 30 seconds 38 127
maximum
5 60 seconds Gas Burner
maximum 20º
(Unit:mm)
The capacitors are individually wrapped in at least one, but not
more than two, complete layers of cheesecloth. They are then
subjected to 20 discharges. The interval between successive
discharges is 5 seconds. The VAC is maintained for 2 minutes
after the last discharge.
S1 F L1 L2 R
C1 C2 C3 CX Ct Vt
Tr S2 Vac L3 L4
Oscilloscope
C1, 2 1 μF ±10% C3 0.033 μF ±5% 10 kV
Active Flammability The cheesecloth should not ignite. L1-4 1.5 Mh ±20% 16A Rod core choke Cx Test capacitor
R 100±2% VAC VR ±5%
Ct 3 μF ±5% 10 kV VR Rated Voltage
F Fuse, Rated 10A Vt Voltage applied to Ct
Vx
5kV
time
1 “Room Condition” is defined as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 8
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Table 2 – Performance & Reliability: Test Methods and Conditions cont'd
Item Specification Test Method
The capacitor under test is held into a flame and in a position
which best promotes burning. Each specimen is exposed to the
flame one time.
About 8mm Test Specimen
200
The burning time should not exceed 30 45º ±5mm Tissue
Passive Flammability seconds. About 10mm
The tissue paper should not ignite. Thick Board
Time of exposure to flame: 30 seconds
Length of flame: 12±1 mm
Gas burner length: 35 mm minimum
Inside diameter: 0.5±0.1 mm
Outside diameter: 0.9 mm maximum
Gas butane gas purity: 95% minimum
Appearance No visual defect
Temperature Capacitance The capacitor is subjected to 5 temperature cycles.
Characteristics Change
Capacitance SL Within ±5% Temperature Cycle
Y5P Within ±10% Dwell Transition
Y5U, Y5V Within ±20% Step Temperature (°C) Time Time
(minutes) (minutes)
Temperature SL ≥ 30 pF: Q ≥ 350 1 −40+0/−3 30
Cycle < 30 pF: Q ≥ 275 2 Room temperature 3
+5/2C 3 125+3/−0 30 3
DF/Q C = Nominal
capacitance 4 Room temperature 3
Y5P DF ≤ 5%
Y5U, Y5V DF ≤ 7.5% Pre-treatment: Capacitor shall be stored at 85±2 for 1 hour then
placed at room condition1 for 24±2 hours.
Post-treatment: Capacitor is stored for 1 to 2 hours at room
IR 3,000 MΩ minimum condition1.
Dielectric No failures
Strength
1 “ Room Condition” is defined as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 9
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Soldering and Mounting Information
Soldering:
When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of the capacitor.
Subjecting this product to excessive heating could reflow the solder joint between the lead and ceramic element and/or may
result in thermal shocks that can crack the ceramic element.
When soldering these capacitors with a soldering iron, it should be performed under the following conditions:
• Temperature of iron-tip: 400ºC maximum
• Soldering iron wattage: 50 W maximum
• Soldering time: 3.5 seconds maximum
Cleaning (ultrasonic cleaning):
To perform ultrasonic cleaning, observe the following conditions:
• Rinse bath capacity: Output of 20 watts per liter or less
• Rinsing time: 5 minute maximum
• Do not vibrate the PCB/PWB directly
• Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires
Construction
Detailed Cross Section
Epoxy Encapsulation
(0.4 mm Minimum Thickness,
Pigment = Blue/UL 94 V-0)
Lead Attach Solder
(Sn96.5/Ag3/Cu0.5)
Dielectric
Material (BaTiO3)
Electrode Electrode
(Ag – Glass Frit) (Ag – Glass Frit)
Lead Attach Solder Lead Wire
(Sn96.5/Ag3/Cu0. Core Metal Steel Dielectric
Barrier Layer Cu Material
Finish Layer 100% Sn (BaTiO3)
(3-7 µm)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 10
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Marking
These capacitors shall be stamped or laser marked with KEMET's trademark, type designation, capacitor class, rated voltage,
rated capacitance and capacitance tolerance codes. In addition, all devices are marked with the recognized approval mark
and a date/lot code for traceability. Marking will be supplied either on one side or both sides of the encapsulated capacitor
body. All marking shall be legible to allow for clear identification of the component. Marking appears in legible contrast.
Illustrated below is an example of the marking format and content. (Two sided marking is limited to capacitors with body
diameters ≤ 8.0 mm.)
Single Sided
Rated Capacitance
KEMET ID (3 Numeric Characters)
Type Designation Capacitance Tolerance Code
(2 Characters) (1 Character)
VDE & ENEC Capacitor Class
approval marks and Rated Voltage
IEC 60384-14 3rd
(2005) UL approval mark
Date/Lot Code
(See Table Below)
Double Sided
Front Back
KEMET ID Rated Capacitance UL approval mark
(3 Numeric Characters)
Type Designation Capacitance VDE & ENEC
(2 Characters) Tolerance Code approval marks
(1 Character) IEC 60384-14 3rd
Capacitor Class (2005)
and Rated Voltage
Date/Lot Code
(See Table Below)
Date/Lot Code Explanation
6 C 6 1234
Manufacturing
Last digit of year, Month:
e.g., Manufacturing 1-9 = Jan - Sept Last 4 digits of
Location Code A = October lot no.
6 = 2016 N = November
D = December
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 11
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Packaging Quantities
Capacitor Ammo Pack (Carrier Tape)
Body Diameter Body Diameter Bulk Bag Component pitch on carrier tape2
(mm) Code1 (Loose)
12.7 mm 15 mm 25.4 mm
7.0 0
8.0 1
9.0 2 1,000 pieces/box
10.0 3
11.0 4 500 pieces/bag 1,000 pieces/box
12.0 5
13.0 6
14.0 7 500 pieces/box
15.0 8
1 The "Body Diameter Code" is located in the third character position of the ordering code. This code identifies the maximum diameter of the capacitor
body in millimeters. For more information regarding the ordering code, see "Ordering Information" section of this document.
2 For details regarding component pitch on carrier tape, see "Ammo Pack Taping Format" and "Ammo Pack Taping Specifications" sections of this
document.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 12
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Figure 1 - Ammo Pack Taping Format
5 mm and 7.5 mm Lead Spacing:
P2 P D ∆S
e
P1 F Ød W2
L H0 W1 ∆h1 0 ∆h2
W0 W T maximum
Marking Side
P0 ℓ ØD0
10 mm Lead Spacing:
P2 P D ∆S
e t2 t1
P1 F Ød W2
L H0 W1
W0 W
P0 ℓ ØD0
Table 3 – Ammo Pack Taping Specifications
Lead Spacing 5 mm 7.5 mm 10 mm
Lead Style Straight Preformed1 Straight Preformed1 Straight Preformed1
Item Symbol Dimensions (mm)
Lead Spacing F 5.0+0.8/−0.2 7.5±1.0 10.0±1.0
Component Pitch P 12.7 15.0 25.4±2
Sprocket Hole Pitch P0 12.7±0.3 15.0±0.3 12.7±0.3
Sprocket Hole Center to P2 6.35±1.5 7.5±1.5 12.7±1.5
Component Center
Sprocket Hole Center to Lead P1 3.75±1.0 3.75±1.0 7.7±1.5
Center
Body Diameter D See "Product Ordering Codes and Ratings" section of this document.
Component Alignment (side/side) ∆S 0±2.0
Carrier Tape Width W 18.0+1.0/−0.5
1 Prefromed (crimped) lead configurations include vertical kink, outside kink and inside kink. See "Lead Configurations" and "Ordering Information"
sections of this document for further details.
2 Also referred to as "lead length" in this document.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 13
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Table 3 – Ammo Pack Taping Specifications cont'd
Lead Spacing 5 mm 7.5 mm 10 mm
Lead Style Straight Preformed1 Straight Preformed1 Straight Preformed1
Item Symbol Dimensions (mm)
Sprocket Hole Position W1 9.0±0.5
Height to Seating Plane2 H0 N/A 18.0+2.0/−0 N/A 18.0+2.0/−0 N/A 18.0+2.0/−0
(preformed leads1)
Height to Seating Plane2 H 20.0+1.5/−1.0 N/A 20.0+1.5/−1.0 N/A 20.0+1.5/−1.0 N/A
(straight leads)
Lead Protrusion ℓ 2.0 maximum
Diameter of Sprocket Hole D0 4.0±0.2
Lead Diameter φd 0.55±0.1
Carrier Tape Thickness t1 0.6±0.3
Total Thickness (Carrier Tape, t2 1.5 maximum
Hold-Down Tape and Lead)
Component Alignment (front/ ∆h1 2.0 maximum
back ) ∆h2
Cut Out Length L 11.0 maximum
Hold-Down Tape Width W0 11.0 minimum 11.5 minimum
Hold-Down Tape Position W2 3.0 maximum 1.5±1.5
1 Prefromed (crimped) lead configurations include vertical kink, outside kink and inside kink. See "Lead Configurations" and "Ordering Information"
sections of this document for further details.
2 Also referred to as "lead length" in this document.
Application Notes:
Storage and Operating Conditions:
The insulating coating of these devices does not form an air and moisture-tight seal. Avoid exposure to moisture and do not
use or store these devices in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt, or the like
are present. Before cleaning, bonding or molding these devices, it is important to verify that your process does not affect
product quality and performance. KEMET recommends testing and evaluating the performance of a cleaned, bonded or
molded product prior to implementing and/or qualifying any of these processes. Store the capacitors where the temperature
and relative humidity do not exceed 40 degrees Centigrade and 70% respectively. For optimum solderability, capacitor stock
should be used promptly, preferably within 6 months of receipt.
Working Voltage:
Application voltage (Vp-p or Vo-p) must not exceed the voltage rating of the capacitor. Irregular voltages can be generated
for a transient period of time when voltage is initially applied and/or removed from a circuit. It is important to choose a
capacitor with a voltage rating greater than or equal to these irregular voltages.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 14
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Operating Temperature and Self-Generating Heat:
The surface temperature of a capacitor should be kept below the upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a high-frequency current,
pulse current or similar current, it may self-generate heat due to dielectric loss. Temperature rise due to self-generated
heating should not exceed 20°C (while operated at an atmosphere temperature of 25°C).
Handling - Vibration and Impact:
Do not expose these devices or their leads to excessive shock or vibration during use.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR
PARTIAL DISPERSION WHEN THE PRODUCT IS USED.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 15
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1065_X1_440 VAC_Y2_300 VAC • 8/4/2017 16
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
KEMET:
C907U150JYSDAA7317 C907U150JYSDAAWL20 C907U150JYSDAAWL35 C907U150JYSDAAWL40
C907U150JYSDAAWL45 C907U150JYSDBA7317 C907U150JYSDBAWL20 C907U150JYSDBAWL35
C907U150JYSDBAWL40 C907U150JYSDBAWL45 C907U150JYSDCA7317 C907U150JYSDCAWL20
C907U150JYSDCAWL35 C907U150JYSDCAWL40 C907U150JYSDCAWL45 C907U150JZNDAA7317
C907U150JZNDAAWL20 C907U150JZNDAAWL35 C907U150JZNDAAWL40 C907U150JZNDAAWL45
C907U150JZNDBA7317 C907U150JZNDBAWL20 C907U150JZNDBAWL35 C907U150JZNDBAWL40
C907U150JZNDBAWL45 C907U150JZNDCA7317 C907U150JZNDCAWL20 C907U150JZNDCAWL35
C907U150JZNDCAWL40 C907U150JZNDCAWL45 C907U150JZSDAA7317 C907U150JZSDAAWL20
C907U150JZSDAAWL35 C907U150JZSDAAWL40 C907U150JZSDAAWL45 C907U150JZSDBA7317
C907U150JZSDBAWL20 C907U150JZSDBAWL35 C907U150JZSDBAWL40 C907U150JZSDBAWL45
C907U150JZSDCA7317 C907U150JZSDCAWL20 C907U150JZSDCAWL35 C907U150JZSDCAWL40
C907U150JZSDCAWL45 C907U152MYVDAA7317 C907U152MYVDAAWL20 C907U152MYVDAAWL35
C907U152MYVDAAWL40 C907U152MYVDAAWL45 C907U152MYVDBA7317 C907U152MYVDBAWL20
C907U152MYVDBAWL35 C907U152MYVDBAWL40 C907U152MYVDBAWL45 C907U152MYVDCA7317
C907U152MYVDCAWL20 C907U152MYVDCAWL35 C907U152MYVDCAWL40 C907U152MYVDCAWL45
C907U152MZVDAA7317 C907U152MZVDAAWL20 C907U152MZVDAAWL35 C907U152MZVDAAWL40
C907U152MZVDAAWL45 C907U152MZVDBA7317 C907U152MZVDBAWL20 C907U152MZVDBAWL35
C907U152MZVDBAWL40 C907U152MZVDBAWL45 C907U152MZVDCA7317 C907U152MZVDCAWL20
C907U152MZVDCAWL35 C907U152MZVDCAWL40 C907U152MZVDCAWL45 C907U180JYSDAA7317
C907U180JYSDAAWL20 C907U180JYSDAAWL35 C907U180JYSDAAWL40 C907U180JYSDAAWL45
C907U180JYSDBA7317 C907U180JYSDBAWL20 C907U180JYSDBAWL35 C907U180JYSDBAWL40
C907U180JYSDBAWL45 C907U180JYSDCA7317 C907U180JYSDCAWL20 C907U180JYSDCAWL35
C907U180JYSDCAWL40 C907U180JYSDCAWL45 C907U180JZSDAA7317 C907U180JZSDAAWL20
C907U180JZSDAAWL35 C907U180JZSDAAWL40 C907U180JZSDAAWL45 C907U180JZSDBA7317
C907U180JZSDBAWL20 C907U180JZSDBAWL35 C907U180JZSDBAWL40 C907U180JZSDBAWL45
01HV23B105K0
工业千兆位以太网 PHY 参考设计
电子工程世界
