电子工程世界电子工程世界电子工程世界

产品描述

搜索
 

Am29LV010BT-45RFEB

器件型号:Am29LV010BT-45RFEB
厂商名称:AMD
厂商官网:http://www.amd.com
下载文档

器件描述

1 Megabit (128 K x 8-Bit) CMOS 3.0 Volt-only Uniform Sector Flash Memory

文档预览

ADVANCE INFORMATION
Am29LV010B
1 Megabit (128 K x 8-Bit)
CMOS 3.0 Volt-only Uniform Sector Flash Memory
DISTINCTIVE CHARACTERISTICS
s
Single power supply operation
— Full voltage range: 2.7 to 3.6 volt read and write
operations for battery-powered applications
— Regulated voltage range: 3.0 to 3.6 volt read and
write operations and for compatibility with high
performance 3.3 volt microprocessors
s
Manufactured on 0.35 µm process technology
s
High performance
— Full voltage range: access times as fast as 55 ns
— Regulated voltage range: access times as fast
as 45 ns
s
Ultra low power consumption (typical values at
5 MHz)
— 200 nA Automatic Sleep mode current
— 200 nA standby mode current
— 7 mA read current
— 15 mA program/erase current
s
Flexible sector architecture
— Eight 16 Kbyte
— Supports full chip erase
— Sector Protection features:
Hardware method of locking a sector to prevent
any program or erase operations within that
sector
Sectors can be locked in-system or via
programming equipment
Temporary Sector Unprotect feature allows code
changes in previously locked sectors
s
Unlock Bypass Mode Program Command
— Reduces overall programming time when
issuing multiple program command sequences
s
Embedded Algorithms
— Embedded Erase algorithm automatically
preprograms and erases the entire chip or any
combination of designated sectors
— Embedded Program algorithm automatically
writes and verifies data at specified addresses
s
Minimum 1,000,000 write cycle guarantee per
sector
s
Package option
— 32-pin TSOP
— 32-pin PLCC
s
Compatibility with JEDEC standards
— Pinout and software compatible with single-
power supply Flash
— Superior inadvertent write protection
s
Data# Polling and toggle bits
— Provides a software method of detecting
program or erase operation completion
s
Erase Suspend/Erase Resume
— Supports reading data from or programming
data to a sector that is not being erased
This document contains information on a product under development at Advanced Micro Devices. The information
is intended to help you evaluate this product. AMD reserves the right to change or discontinue work on this proposed
product without notice.
Publication#
22140
Rev:
A
Amendment/0
Issue Date:
April 1998
ADVANCE INFORMATION
GENERAL DESCRIPTION
The Am29LV010B is a 1 Mbit, 3.0 Volt-only Flash
memory device organized as 131,072 bytes. The
Am29LV010B has a uniform sector architecture.
The device is offered in 32-pin PLCC and 32-pin TSOP
packages. The byte-wide (x8) data appears on DQ7–
DQ0. All read, erase, and program operations are
accomplished using only a single power supply. The
device can also be programmed in standard EPROM
programmers.
The standard Am29LV010B offers access times of 45,
55, 70, and 120 ns (90 and 100 ns parts are also avail-
able), allowing high speed microprocessors to operate
without wait states. To eliminate bus contention, the
device has separate chip enable (CE#), write enable
(WE#) and output enable (OE#) controls.
The device requires only a
single power supply
(2.7
V–3.6V) for both read and write functions. Internally
generated and regulated voltages are provided for the
program and erase operations.
The device is entirely command set compatible with the
JEDEC single-power-supply Flash standard.
Com-
mands are written to the command register using
standard microprocessor write timings. Register con-
tents serve as input to an internal state-machine that
controls the erase and programming circuitry. Write
cycles also internally latch addresses and data needed
for the programming and erase operations. Reading
data out of the device is similar to reading from other
Flash or EPROM devices.
Device programming occurs by executing the program
command sequence. This initiates the
Embedded
Program
algorithm—an internal algorithm that auto-
matically times the program pulse widths and verifies
proper cell margin. The
Unlock Bypass
mode facili-
tates faster programming times by requiring only two
write cycles to program data instead of four.
Device erasure occurs by executing the erase com-
mand sequence. This initiates the
Embedded Erase
algorithm—an internal algorithm that automatically
preprograms the array (if it is not already programmed)
before executing the erase operation. During erase, the
device automatically times the erase pulse widths and
verifies proper cell margin.
The host system can detect whether a program or
erase operation is complete by reading the DQ7 (Data#
Polling) and DQ6 (toggle)
status bits.
After a program
or erase cycle has been completed, the device is ready
to read array data or accept another command.
The
sector erase architecture
allows memory sectors
to be erased and reprogrammed without affecting the
data contents of other sectors. The device is fully
erased when shipped from the factory.
Hardware data protection
measures include a low
V
CC
detector that automatically inhibits write opera-
tions during power transitions. The
hardware sector
protection
feature disables both program and erase
operations in any combination of the sectors of mem-
ory. This can be achieved in-system or via program-
ming equipment.
The
Erase Suspend
feature enables the user to put
erase on hold for any period of time to read data from,
or program data to, any sector that is not selected for
erasure. True background erase can thus be achieved.
The device offers two power-saving features. When ad-
dresses have been stable for a specified amount of
time, the device enters the
automatic sleep mode.
The system can also place the device into the
standby
mode.
Power consumption is greatly reduced in both
these modes.
AMD’s Flash technology combines years of Flash
memory manufacturing experience to produce the
highest levels of quality, reliability and cost effective-
ness. The device electrically erases all bits within a
sector simultaneously via Fowler-Nordheim tun-
neling. The data is programmed using hot electron
injection.
Am29LV010B
2
ADVANCE INFORMATION
PRODUCT SELECTOR GUIDE
Family Part Number
Speed Options
Regulated Voltage Range: V
CC
=3.0–3.6 V
Full Voltage Range: V
CC
= 2.7–3.6 V
Max access time, ns (t
ACC
)
Max CE# access time, ns (t
CE
)
Max OE# access time, ns (t
OE
)
45
45
30
-45R
-55
55
55
30
-70
70
70
35
-120
120
120
50
Am29LV010B
Note:
See “AC Characteristics” for full specifications.
BLOCK DIAGRAM
DQ0
DQ7
V
CC
V
SS
Erase Voltage
Generator
Input/Output
Buffers
Sector Switches
WE#
State
Control
Command
Register
PGM Voltage
Generator
Chip Enable
Output Enable
Logic
STB
Data
Latch
CE#
OE#
STB
V
CC
Detector
Timer
Address Latch
Y-Decoder
Y-Gating
X-Decoder
Cell Matrix
A0–A16
22140A-1
3
Am29LV010B
ADVANCE INFORMATION
CONNECTION DIAGRAMS
A11
A9
A8
A13
A14
NC
WE#
V
CC
NC
A16
A15
A12
A7
A6
A5
A4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
OE#
A10
CE#
DQ7
DQ6
DQ5
DQ4
DQ3
V
SS
DQ2
DQ1
DQ0
A0
A1
A2
A3
32-Pin Standard TSOP
OE#
A10
CE#
DQ7
DQ6
DQ5
DQ4
DQ3
V
SS
DQ2
DQ1
DQ0
A0
A1
A2
A3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32-Pin Reverse TSOP
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
A11
A9
A8
A13
A14
NC
WE#
V
CC
NC
A16
A15
A12
A7
A6
A5
A4
4 3 2 1 32 31 30
A7
A6
A5
A4
A3
A2
A1
A0
DQ0
5
6
7
8
9
10
11
12
13
14 15 16 17 18 19 20
V
SS
DQ3
DQ4
DQ1
DQ2
DQ5
DQ6
PLCC
29
28
27
26
25
24
23
22
21
A14
A13
A8
A9
A11
OE#
A10
CE#
DQ7
V
CC
A12
A15
WE#
NC
A16
NC
22140A-2
Am29LV010B
4
ADVANCE INFORMATION
PIN CONFIGURATION
A0–A16
= 17 addresses
DQ0–DQ7 = 8 data inputs/outputs
CE#
OE#
WE#
V
CC
= Chip enable
= Output enable
= Write enable
= 3.0 volt-only single power supply
(see Product Selector Guide for speed
options and voltage supply tolerances)
= Device ground
= Pin not connected internally
LOGIC SYMBOL
17
A0–A16
DQ0–DQ7
8
CE#
OE#
WE#
V
SS
NC
22140A-3
5
Am29LV010B
ADC采样DAC两组输出电压,有几个问题,如图。另外,假如信号1uA左右,是否需要20位...
ADC采样DAC两组输出电压,有几个问题,如图。另外,假如信号1uA左右,是否需要20位的ADC芯片?是否需要考虑信号的频率? ADC采样DAC两组输出电压,有几个问题,如图。另外,假如信号1uA左右,是否需要20位......
QWE4562009 综合技术交流
DSP内核结构中的 D L S M
TI公司的TMS320C6XXX系列的DSP的CPU结构包括两对寄存器组(AB),和8个独立的功能单元,每个寄存器有4个功能单元(DLMS),不同单元功能如下: D:用于装载或保存信息到存储器并执行算数操作,该单元存取存储器,并对指针使用偏移量,也可执行32位的加减法运算。 M:用于乘法操作。有两个乘法器单元M1,M2,可执行16位乘16位的运算,产生32位结果。 L:用于逻辑和算术运算。该单元执行32/40位的算术运算,比较运算,以及32位逻辑运算。 S:用于分...
灞波儿奔 DSP 与 ARM 处理器
新编电子变压器手册
本帖最后由qwqwqw2088于2015-4-1012:02编辑 新编电子变压器手册,变压器最小,五脏俱全,变压器种类之多、工种也多,不可能每一个人都懂。再加上变压器行业是个实验学科,你没有机会接触这一类变压器,任你看的资料再多,也难体会其中的奥妙,所以出现25人共同编一本书。比起一个人编的书,其特点就无需我多说了。没有过去那种条件,各厂每年要见一次面,大家基本都认识,要组织25人统一思路不是一件容易的事。&nbs...
qwqwqw2088 模拟与混合信号
招贤:电力测试仪器研师
我公司需要开发系列电力测试仪器,寻求在此开发方面有丰富经验的高级工程师合作。 可合作方式: (1)委托开发,技术合作(不限地区) (2)全职聘请 (3)兼职开发 要求: (1)3年以上电力测试仪器开发经验,精通各种单片机开发,熟练掌握模拟电路和数字电路的开发设计,有丰富的硬件电路设计经验;对电路抗干扰设计有较强能力,能独立完成整个产品的设计开发。 (2)有现成产品技术者优先 E-MAIL:stacey89@163.com QQ:314496781手机:1...
lxxo 嵌入式系统
51单片机开发板
我大三了,之前接触过430的单片机,现在想买一块51开发板,练习一下,各位大师给推荐下哪种开发板好啊!?51单片机开发板...
wopuyao 51单片机
关于smp8634芯片问题
现在手上有一块smp8634芯片的板子。可是播放高清视频及图片。 请问。有没有高手知道,smp8634是否可以播放falsh文件。最好是可兼容falsh各个版本的。关于smp8634芯片问题...
huangjinhu 嵌入式系统

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京ICP证060456号 京ICP备10001474号 电信业务审批[2006]字第258号函 京公海网安备110108001534 Copyright © 2005-2020 EEWORLD.com.cn, Inc. All rights reserved