电子工程世界电子工程世界电子工程世界

产品描述

搜索
 

Am29LV010BT-45RFCB

器件型号:Am29LV010BT-45RFCB
厂商名称:AMD
厂商官网:http://www.amd.com
下载文档

器件描述

1 Megabit (128 K x 8-Bit) CMOS 3.0 Volt-only Uniform Sector Flash Memory

文档预览

ADVANCE INFORMATION
Am29LV010B
1 Megabit (128 K x 8-Bit)
CMOS 3.0 Volt-only Uniform Sector Flash Memory
DISTINCTIVE CHARACTERISTICS
s
Single power supply operation
— Full voltage range: 2.7 to 3.6 volt read and write
operations for battery-powered applications
— Regulated voltage range: 3.0 to 3.6 volt read and
write operations and for compatibility with high
performance 3.3 volt microprocessors
s
Manufactured on 0.35 µm process technology
s
High performance
— Full voltage range: access times as fast as 55 ns
— Regulated voltage range: access times as fast
as 45 ns
s
Ultra low power consumption (typical values at
5 MHz)
— 200 nA Automatic Sleep mode current
— 200 nA standby mode current
— 7 mA read current
— 15 mA program/erase current
s
Flexible sector architecture
— Eight 16 Kbyte
— Supports full chip erase
— Sector Protection features:
Hardware method of locking a sector to prevent
any program or erase operations within that
sector
Sectors can be locked in-system or via
programming equipment
Temporary Sector Unprotect feature allows code
changes in previously locked sectors
s
Unlock Bypass Mode Program Command
— Reduces overall programming time when
issuing multiple program command sequences
s
Embedded Algorithms
— Embedded Erase algorithm automatically
preprograms and erases the entire chip or any
combination of designated sectors
— Embedded Program algorithm automatically
writes and verifies data at specified addresses
s
Minimum 1,000,000 write cycle guarantee per
sector
s
Package option
— 32-pin TSOP
— 32-pin PLCC
s
Compatibility with JEDEC standards
— Pinout and software compatible with single-
power supply Flash
— Superior inadvertent write protection
s
Data# Polling and toggle bits
— Provides a software method of detecting
program or erase operation completion
s
Erase Suspend/Erase Resume
— Supports reading data from or programming
data to a sector that is not being erased
This document contains information on a product under development at Advanced Micro Devices. The information
is intended to help you evaluate this product. AMD reserves the right to change or discontinue work on this proposed
product without notice.
Publication#
22140
Rev:
A
Amendment/0
Issue Date:
April 1998
ADVANCE INFORMATION
GENERAL DESCRIPTION
The Am29LV010B is a 1 Mbit, 3.0 Volt-only Flash
memory device organized as 131,072 bytes. The
Am29LV010B has a uniform sector architecture.
The device is offered in 32-pin PLCC and 32-pin TSOP
packages. The byte-wide (x8) data appears on DQ7–
DQ0. All read, erase, and program operations are
accomplished using only a single power supply. The
device can also be programmed in standard EPROM
programmers.
The standard Am29LV010B offers access times of 45,
55, 70, and 120 ns (90 and 100 ns parts are also avail-
able), allowing high speed microprocessors to operate
without wait states. To eliminate bus contention, the
device has separate chip enable (CE#), write enable
(WE#) and output enable (OE#) controls.
The device requires only a
single power supply
(2.7
V–3.6V) for both read and write functions. Internally
generated and regulated voltages are provided for the
program and erase operations.
The device is entirely command set compatible with the
JEDEC single-power-supply Flash standard.
Com-
mands are written to the command register using
standard microprocessor write timings. Register con-
tents serve as input to an internal state-machine that
controls the erase and programming circuitry. Write
cycles also internally latch addresses and data needed
for the programming and erase operations. Reading
data out of the device is similar to reading from other
Flash or EPROM devices.
Device programming occurs by executing the program
command sequence. This initiates the
Embedded
Program
algorithm—an internal algorithm that auto-
matically times the program pulse widths and verifies
proper cell margin. The
Unlock Bypass
mode facili-
tates faster programming times by requiring only two
write cycles to program data instead of four.
Device erasure occurs by executing the erase com-
mand sequence. This initiates the
Embedded Erase
algorithm—an internal algorithm that automatically
preprograms the array (if it is not already programmed)
before executing the erase operation. During erase, the
device automatically times the erase pulse widths and
verifies proper cell margin.
The host system can detect whether a program or
erase operation is complete by reading the DQ7 (Data#
Polling) and DQ6 (toggle)
status bits.
After a program
or erase cycle has been completed, the device is ready
to read array data or accept another command.
The
sector erase architecture
allows memory sectors
to be erased and reprogrammed without affecting the
data contents of other sectors. The device is fully
erased when shipped from the factory.
Hardware data protection
measures include a low
V
CC
detector that automatically inhibits write opera-
tions during power transitions. The
hardware sector
protection
feature disables both program and erase
operations in any combination of the sectors of mem-
ory. This can be achieved in-system or via program-
ming equipment.
The
Erase Suspend
feature enables the user to put
erase on hold for any period of time to read data from,
or program data to, any sector that is not selected for
erasure. True background erase can thus be achieved.
The device offers two power-saving features. When ad-
dresses have been stable for a specified amount of
time, the device enters the
automatic sleep mode.
The system can also place the device into the
standby
mode.
Power consumption is greatly reduced in both
these modes.
AMD’s Flash technology combines years of Flash
memory manufacturing experience to produce the
highest levels of quality, reliability and cost effective-
ness. The device electrically erases all bits within a
sector simultaneously via Fowler-Nordheim tun-
neling. The data is programmed using hot electron
injection.
Am29LV010B
2
ADVANCE INFORMATION
PRODUCT SELECTOR GUIDE
Family Part Number
Speed Options
Regulated Voltage Range: V
CC
=3.0–3.6 V
Full Voltage Range: V
CC
= 2.7–3.6 V
Max access time, ns (t
ACC
)
Max CE# access time, ns (t
CE
)
Max OE# access time, ns (t
OE
)
45
45
30
-45R
-55
55
55
30
-70
70
70
35
-120
120
120
50
Am29LV010B
Note:
See “AC Characteristics” for full specifications.
BLOCK DIAGRAM
DQ0
DQ7
V
CC
V
SS
Erase Voltage
Generator
Input/Output
Buffers
Sector Switches
WE#
State
Control
Command
Register
PGM Voltage
Generator
Chip Enable
Output Enable
Logic
STB
Data
Latch
CE#
OE#
STB
V
CC
Detector
Timer
Address Latch
Y-Decoder
Y-Gating
X-Decoder
Cell Matrix
A0–A16
22140A-1
3
Am29LV010B
ADVANCE INFORMATION
CONNECTION DIAGRAMS
A11
A9
A8
A13
A14
NC
WE#
V
CC
NC
A16
A15
A12
A7
A6
A5
A4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
OE#
A10
CE#
DQ7
DQ6
DQ5
DQ4
DQ3
V
SS
DQ2
DQ1
DQ0
A0
A1
A2
A3
32-Pin Standard TSOP
OE#
A10
CE#
DQ7
DQ6
DQ5
DQ4
DQ3
V
SS
DQ2
DQ1
DQ0
A0
A1
A2
A3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32-Pin Reverse TSOP
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
A11
A9
A8
A13
A14
NC
WE#
V
CC
NC
A16
A15
A12
A7
A6
A5
A4
4 3 2 1 32 31 30
A7
A6
A5
A4
A3
A2
A1
A0
DQ0
5
6
7
8
9
10
11
12
13
14 15 16 17 18 19 20
V
SS
DQ3
DQ4
DQ1
DQ2
DQ5
DQ6
PLCC
29
28
27
26
25
24
23
22
21
A14
A13
A8
A9
A11
OE#
A10
CE#
DQ7
V
CC
A12
A15
WE#
NC
A16
NC
22140A-2
Am29LV010B
4
ADVANCE INFORMATION
PIN CONFIGURATION
A0–A16
= 17 addresses
DQ0–DQ7 = 8 data inputs/outputs
CE#
OE#
WE#
V
CC
= Chip enable
= Output enable
= Write enable
= 3.0 volt-only single power supply
(see Product Selector Guide for speed
options and voltage supply tolerances)
= Device ground
= Pin not connected internally
LOGIC SYMBOL
17
A0–A16
DQ0–DQ7
8
CE#
OE#
WE#
V
SS
NC
22140A-3
5
Am29LV010B
“【TGF4042 信号发生器】”同步触发测量
此内容由EEWORLD论坛网友fine0406原创,如需转载或用于商业用途需征得作者同意并注明出处 这周进行信号源的同步触发测量。在一些工业或医疗领域有时会需要一些触发激励或测量的信号,如触发电源、控制器等,在触发信号下系统开始工作。另外磁共振系统中还有一些脉冲激励信号,总体表现为方波脉络中含有很多的高频信号。 首先在信号源中设置触发模式,首先选择内部源触发,设置如下图1所示,输出信号如下图2所示。 图1触发输出设置 图2触发输出信号 内部源采用循环触发,1...
fine0406 测试/测量
新手上路,请详细解答
我公司有一套大华的监控系统,硬盘录像机坏了,我换了个海康威视的硬盘录像机,摄像头的IP能读出来,就是画面没显示。以下是显示的两个图片,请帮忙解答下谢谢。 新手上路,请详细解答...
大理菠萝山 安防电子
经典解析电容与电容器
电容相信大家都不陌生,就算没有见过也听过,在现在的生活中,电容是必不可少的元件之一,大到线路,小到一个小小的电子主板,特别是单相电机的启动,都无不需要电容。什么是电容呢?在这之前我们先了解二个名词,电容和电容器。 电容指的是在给定电位差下的电荷储藏量。电容器是电荷在电场中会受力而移动,当导体之间有了介质,则阻碍了电荷移动而使得电荷累积在导体上;造成电荷的累积储存,最常见的例子就是两片平行金属板。 从定义上理解感觉电容和电容器没多大区别,总的意思都是可以储存电荷。不管是电容还是...
Jacktang 模拟与混合信号
发一个8WLED电源原理图,很给力!
发一个8WLED电源原理图,这是一个是适合8W以下的LED驱动电源,Protel99原生态格式,做小功率电源的可以借鉴一下,愿意回复就收藏吧! Timson,如果您要查看本帖隐藏内容请回复 [本帖最后由qwqwqw2088于2012-9-821:42编辑]发一个8WLED电源原理图,很给力!...
qwqwqw2088 电源技术
ccs工程的头文件找不到!怎么回事?
请问: 我是用“scanallfiledependencies”的方法加入头文件, 并且,当前工程的“include”已经显示"board.h"头文件。 但是,“buildall”时,却显示"Codec.c",line2:fatalerror:couldnotopensourcefile"board.h", 这是怎么回事?ccs工程的头文件找不到!怎么回事?...
zqs0001 DSP 与 ARM 处理器
中文社区挂了?
过年期间有段时间不能进,前两天还可以进。今天上午还进去逛了逛,现在进不去了,社区是彻底挂了吗?中文社区挂了?...
shihuntaotie MicroPython开源版块

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京ICP证060456号 京ICP备10001474号 电信业务审批[2006]字第258号函 京公海网安备110108001534 Copyright © 2005-2020 EEWORLD.com.cn, Inc. All rights reserved