电子工程世界电子工程世界电子工程世界

产品描述

搜索
 

Am29LV010BT-45REIB

器件型号:Am29LV010BT-45REIB
厂商名称:AMD
厂商官网:http://www.amd.com
下载文档

器件描述

1 Megabit (128 K x 8-Bit) CMOS 3.0 Volt-only Uniform Sector Flash Memory

文档预览

ADVANCE INFORMATION
Am29LV010B
1 Megabit (128 K x 8-Bit)
CMOS 3.0 Volt-only Uniform Sector Flash Memory
DISTINCTIVE CHARACTERISTICS
s
Single power supply operation
— Full voltage range: 2.7 to 3.6 volt read and write
operations for battery-powered applications
— Regulated voltage range: 3.0 to 3.6 volt read and
write operations and for compatibility with high
performance 3.3 volt microprocessors
s
Manufactured on 0.35 µm process technology
s
High performance
— Full voltage range: access times as fast as 55 ns
— Regulated voltage range: access times as fast
as 45 ns
s
Ultra low power consumption (typical values at
5 MHz)
— 200 nA Automatic Sleep mode current
— 200 nA standby mode current
— 7 mA read current
— 15 mA program/erase current
s
Flexible sector architecture
— Eight 16 Kbyte
— Supports full chip erase
— Sector Protection features:
Hardware method of locking a sector to prevent
any program or erase operations within that
sector
Sectors can be locked in-system or via
programming equipment
Temporary Sector Unprotect feature allows code
changes in previously locked sectors
s
Unlock Bypass Mode Program Command
— Reduces overall programming time when
issuing multiple program command sequences
s
Embedded Algorithms
— Embedded Erase algorithm automatically
preprograms and erases the entire chip or any
combination of designated sectors
— Embedded Program algorithm automatically
writes and verifies data at specified addresses
s
Minimum 1,000,000 write cycle guarantee per
sector
s
Package option
— 32-pin TSOP
— 32-pin PLCC
s
Compatibility with JEDEC standards
— Pinout and software compatible with single-
power supply Flash
— Superior inadvertent write protection
s
Data# Polling and toggle bits
— Provides a software method of detecting
program or erase operation completion
s
Erase Suspend/Erase Resume
— Supports reading data from or programming
data to a sector that is not being erased
This document contains information on a product under development at Advanced Micro Devices. The information
is intended to help you evaluate this product. AMD reserves the right to change or discontinue work on this proposed
product without notice.
Publication#
22140
Rev:
A
Amendment/0
Issue Date:
April 1998
ADVANCE INFORMATION
GENERAL DESCRIPTION
The Am29LV010B is a 1 Mbit, 3.0 Volt-only Flash
memory device organized as 131,072 bytes. The
Am29LV010B has a uniform sector architecture.
The device is offered in 32-pin PLCC and 32-pin TSOP
packages. The byte-wide (x8) data appears on DQ7–
DQ0. All read, erase, and program operations are
accomplished using only a single power supply. The
device can also be programmed in standard EPROM
programmers.
The standard Am29LV010B offers access times of 45,
55, 70, and 120 ns (90 and 100 ns parts are also avail-
able), allowing high speed microprocessors to operate
without wait states. To eliminate bus contention, the
device has separate chip enable (CE#), write enable
(WE#) and output enable (OE#) controls.
The device requires only a
single power supply
(2.7
V–3.6V) for both read and write functions. Internally
generated and regulated voltages are provided for the
program and erase operations.
The device is entirely command set compatible with the
JEDEC single-power-supply Flash standard.
Com-
mands are written to the command register using
standard microprocessor write timings. Register con-
tents serve as input to an internal state-machine that
controls the erase and programming circuitry. Write
cycles also internally latch addresses and data needed
for the programming and erase operations. Reading
data out of the device is similar to reading from other
Flash or EPROM devices.
Device programming occurs by executing the program
command sequence. This initiates the
Embedded
Program
algorithm—an internal algorithm that auto-
matically times the program pulse widths and verifies
proper cell margin. The
Unlock Bypass
mode facili-
tates faster programming times by requiring only two
write cycles to program data instead of four.
Device erasure occurs by executing the erase com-
mand sequence. This initiates the
Embedded Erase
algorithm—an internal algorithm that automatically
preprograms the array (if it is not already programmed)
before executing the erase operation. During erase, the
device automatically times the erase pulse widths and
verifies proper cell margin.
The host system can detect whether a program or
erase operation is complete by reading the DQ7 (Data#
Polling) and DQ6 (toggle)
status bits.
After a program
or erase cycle has been completed, the device is ready
to read array data or accept another command.
The
sector erase architecture
allows memory sectors
to be erased and reprogrammed without affecting the
data contents of other sectors. The device is fully
erased when shipped from the factory.
Hardware data protection
measures include a low
V
CC
detector that automatically inhibits write opera-
tions during power transitions. The
hardware sector
protection
feature disables both program and erase
operations in any combination of the sectors of mem-
ory. This can be achieved in-system or via program-
ming equipment.
The
Erase Suspend
feature enables the user to put
erase on hold for any period of time to read data from,
or program data to, any sector that is not selected for
erasure. True background erase can thus be achieved.
The device offers two power-saving features. When ad-
dresses have been stable for a specified amount of
time, the device enters the
automatic sleep mode.
The system can also place the device into the
standby
mode.
Power consumption is greatly reduced in both
these modes.
AMD’s Flash technology combines years of Flash
memory manufacturing experience to produce the
highest levels of quality, reliability and cost effective-
ness. The device electrically erases all bits within a
sector simultaneously via Fowler-Nordheim tun-
neling. The data is programmed using hot electron
injection.
Am29LV010B
2
ADVANCE INFORMATION
PRODUCT SELECTOR GUIDE
Family Part Number
Speed Options
Regulated Voltage Range: V
CC
=3.0–3.6 V
Full Voltage Range: V
CC
= 2.7–3.6 V
Max access time, ns (t
ACC
)
Max CE# access time, ns (t
CE
)
Max OE# access time, ns (t
OE
)
45
45
30
-45R
-55
55
55
30
-70
70
70
35
-120
120
120
50
Am29LV010B
Note:
See “AC Characteristics” for full specifications.
BLOCK DIAGRAM
DQ0
DQ7
V
CC
V
SS
Erase Voltage
Generator
Input/Output
Buffers
Sector Switches
WE#
State
Control
Command
Register
PGM Voltage
Generator
Chip Enable
Output Enable
Logic
STB
Data
Latch
CE#
OE#
STB
V
CC
Detector
Timer
Address Latch
Y-Decoder
Y-Gating
X-Decoder
Cell Matrix
A0–A16
22140A-1
3
Am29LV010B
ADVANCE INFORMATION
CONNECTION DIAGRAMS
A11
A9
A8
A13
A14
NC
WE#
V
CC
NC
A16
A15
A12
A7
A6
A5
A4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
OE#
A10
CE#
DQ7
DQ6
DQ5
DQ4
DQ3
V
SS
DQ2
DQ1
DQ0
A0
A1
A2
A3
32-Pin Standard TSOP
OE#
A10
CE#
DQ7
DQ6
DQ5
DQ4
DQ3
V
SS
DQ2
DQ1
DQ0
A0
A1
A2
A3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32-Pin Reverse TSOP
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
A11
A9
A8
A13
A14
NC
WE#
V
CC
NC
A16
A15
A12
A7
A6
A5
A4
4 3 2 1 32 31 30
A7
A6
A5
A4
A3
A2
A1
A0
DQ0
5
6
7
8
9
10
11
12
13
14 15 16 17 18 19 20
V
SS
DQ3
DQ4
DQ1
DQ2
DQ5
DQ6
PLCC
29
28
27
26
25
24
23
22
21
A14
A13
A8
A9
A11
OE#
A10
CE#
DQ7
V
CC
A12
A15
WE#
NC
A16
NC
22140A-2
Am29LV010B
4
ADVANCE INFORMATION
PIN CONFIGURATION
A0–A16
= 17 addresses
DQ0–DQ7 = 8 data inputs/outputs
CE#
OE#
WE#
V
CC
= Chip enable
= Output enable
= Write enable
= 3.0 volt-only single power supply
(see Product Selector Guide for speed
options and voltage supply tolerances)
= Device ground
= Pin not connected internally
LOGIC SYMBOL
17
A0–A16
DQ0–DQ7
8
CE#
OE#
WE#
V
SS
NC
22140A-3
5
Am29LV010B
e络盟 2012树莓派 (Raspberry Pi)发烧友见面会
e络盟计划在10月在上海举行一场RaspberryPi发烧友见面会,任何发烧友都可以转发报名参与,将为出席者提供免费晚餐,同时欢迎发烧友展示自己的应用,将提供必要演示设施。地点IC咖啡。名额有限,报名以邮件确认为准(注明来自EEWORLD)。 玩过树莓派RaspberryPi? 是树莓派(RaspberryPi)应用高手? 如何更好的使用RaspberryPi?10月17日,我们在上海一起追RaspberryPi 顶尖ARM解决方案供应商英蓓特Embest专家将受邀...
maylove 单片机
向太空发射载荷产品,以纪念成立5周年,Qorvo用实力说话!
中国北京,2020年1月14日——移动应用、基础设施与航空航天、国防应用中RF解决方案的领先供应商Qorvo®,Inc.(纳斯达克代码:QRVO)今日宣布,其英国移动产品设计团队向太空发射Qorvo载荷产品,深入太空22英里后安全回到地面。这次发射是团队建设活动的一部分,也是为了纪念Qorvo成立五周年。 Qorvo英国设计团队在移动产品设计工程总监AndyCoulthard的带领下,尝试发射采用丙烯酸制成的...
alan000345 RF/无线
【转帖】如何正确选择温补晶振
精度、低功耗和小型化,仍然是温补晶振一成不变的研究课题。在小型化与片式化方面,面临不少困难,其中主要的有两点:一是小型化会使石英晶体振子的频率可变幅度变小,温度补偿更加困难;二是片式封装后在其接作业中,由于焊接温度远高于温补晶振的最大允许温度,会使晶体振子的频率发生变化,若不采限局部散热降温措施,难以将温补晶振的频率变化量控制在±0.5×10-6以下。但是,温补晶振的技术水平的提高并没进入到极限,创新的内容和潜力仍较大。下面简单的向大家介绍一下温补晶振的参数要求!1.频率准确度,在标准电源电压,...
皇华Ameya360 DIY/开源硬件专区
带通滤波的曲线会有个尖峰要怎么消除?
根据图中的电路测得各个频段的曲线,在10HZ和100HZ时会有个尖峰,怎么这是什么影响的?还有在100K和1M频段时的带宽还不够,不知道这个怎么回事? 带通滤波的曲线会有个尖峰要怎么消除?...
zk643 模拟电子
矩阵键盘16按键+独立按键IIC通讯总线节省管脚资源IIC模块
TY-JP01总线式可级联矩阵键盘模块 模块参数: 1、通讯方式:IIC(兼容3-6V电平) 2、供电电压:3-6V 3、尺寸:85MM(长)*45MM(宽) 4、通讯频率:最大95KHZ 5、工作环境:?40?Cto+85?C 6、ESDprotectionexceeds2000VHBMperJESD22-A114and1000VCDMper JESD22-C101 7、最多八个模块级联; 接线方式 1-------VCC(电源3-6V...
tianyingkeji 创意市集
信号隔离器选取问题
各位, 本人在寻找一款信号隔离器,用于发送大概100K到10MHZ信号到高压电缆(380V)并读取该信号在电缆的回波信号。大概框图如附件。请教各位该信号隔离器哪里可以找得到? 信号隔离器选取问题...
imzeq 模拟与混合信号

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京ICP证060456号 京ICP备10001474号 电信业务审批[2006]字第258号函 京公海网安备110108001534 Copyright © 2005-2020 EEWORLD.com.cn, Inc. All rights reserved