电子工程世界电子工程世界电子工程世界

产品描述

搜索
 

Am29LV010BB-70JEB

器件型号:Am29LV010BB-70JEB
厂商名称:AMD
厂商官网:http://www.amd.com
下载文档

器件描述

1 Megabit (128 K x 8-Bit) CMOS 3.0 Volt-only Uniform Sector Flash Memory

文档预览

ADVANCE INFORMATION
Am29LV010B
1 Megabit (128 K x 8-Bit)
CMOS 3.0 Volt-only Uniform Sector Flash Memory
DISTINCTIVE CHARACTERISTICS
s
Single power supply operation
— Full voltage range: 2.7 to 3.6 volt read and write
operations for battery-powered applications
— Regulated voltage range: 3.0 to 3.6 volt read and
write operations and for compatibility with high
performance 3.3 volt microprocessors
s
Manufactured on 0.35 µm process technology
s
High performance
— Full voltage range: access times as fast as 55 ns
— Regulated voltage range: access times as fast
as 45 ns
s
Ultra low power consumption (typical values at
5 MHz)
— 200 nA Automatic Sleep mode current
— 200 nA standby mode current
— 7 mA read current
— 15 mA program/erase current
s
Flexible sector architecture
— Eight 16 Kbyte
— Supports full chip erase
— Sector Protection features:
Hardware method of locking a sector to prevent
any program or erase operations within that
sector
Sectors can be locked in-system or via
programming equipment
Temporary Sector Unprotect feature allows code
changes in previously locked sectors
s
Unlock Bypass Mode Program Command
— Reduces overall programming time when
issuing multiple program command sequences
s
Embedded Algorithms
— Embedded Erase algorithm automatically
preprograms and erases the entire chip or any
combination of designated sectors
— Embedded Program algorithm automatically
writes and verifies data at specified addresses
s
Minimum 1,000,000 write cycle guarantee per
sector
s
Package option
— 32-pin TSOP
— 32-pin PLCC
s
Compatibility with JEDEC standards
— Pinout and software compatible with single-
power supply Flash
— Superior inadvertent write protection
s
Data# Polling and toggle bits
— Provides a software method of detecting
program or erase operation completion
s
Erase Suspend/Erase Resume
— Supports reading data from or programming
data to a sector that is not being erased
This document contains information on a product under development at Advanced Micro Devices. The information
is intended to help you evaluate this product. AMD reserves the right to change or discontinue work on this proposed
product without notice.
Publication#
22140
Rev:
A
Amendment/0
Issue Date:
April 1998
ADVANCE INFORMATION
GENERAL DESCRIPTION
The Am29LV010B is a 1 Mbit, 3.0 Volt-only Flash
memory device organized as 131,072 bytes. The
Am29LV010B has a uniform sector architecture.
The device is offered in 32-pin PLCC and 32-pin TSOP
packages. The byte-wide (x8) data appears on DQ7–
DQ0. All read, erase, and program operations are
accomplished using only a single power supply. The
device can also be programmed in standard EPROM
programmers.
The standard Am29LV010B offers access times of 45,
55, 70, and 120 ns (90 and 100 ns parts are also avail-
able), allowing high speed microprocessors to operate
without wait states. To eliminate bus contention, the
device has separate chip enable (CE#), write enable
(WE#) and output enable (OE#) controls.
The device requires only a
single power supply
(2.7
V–3.6V) for both read and write functions. Internally
generated and regulated voltages are provided for the
program and erase operations.
The device is entirely command set compatible with the
JEDEC single-power-supply Flash standard.
Com-
mands are written to the command register using
standard microprocessor write timings. Register con-
tents serve as input to an internal state-machine that
controls the erase and programming circuitry. Write
cycles also internally latch addresses and data needed
for the programming and erase operations. Reading
data out of the device is similar to reading from other
Flash or EPROM devices.
Device programming occurs by executing the program
command sequence. This initiates the
Embedded
Program
algorithm—an internal algorithm that auto-
matically times the program pulse widths and verifies
proper cell margin. The
Unlock Bypass
mode facili-
tates faster programming times by requiring only two
write cycles to program data instead of four.
Device erasure occurs by executing the erase com-
mand sequence. This initiates the
Embedded Erase
algorithm—an internal algorithm that automatically
preprograms the array (if it is not already programmed)
before executing the erase operation. During erase, the
device automatically times the erase pulse widths and
verifies proper cell margin.
The host system can detect whether a program or
erase operation is complete by reading the DQ7 (Data#
Polling) and DQ6 (toggle)
status bits.
After a program
or erase cycle has been completed, the device is ready
to read array data or accept another command.
The
sector erase architecture
allows memory sectors
to be erased and reprogrammed without affecting the
data contents of other sectors. The device is fully
erased when shipped from the factory.
Hardware data protection
measures include a low
V
CC
detector that automatically inhibits write opera-
tions during power transitions. The
hardware sector
protection
feature disables both program and erase
operations in any combination of the sectors of mem-
ory. This can be achieved in-system or via program-
ming equipment.
The
Erase Suspend
feature enables the user to put
erase on hold for any period of time to read data from,
or program data to, any sector that is not selected for
erasure. True background erase can thus be achieved.
The device offers two power-saving features. When ad-
dresses have been stable for a specified amount of
time, the device enters the
automatic sleep mode.
The system can also place the device into the
standby
mode.
Power consumption is greatly reduced in both
these modes.
AMD’s Flash technology combines years of Flash
memory manufacturing experience to produce the
highest levels of quality, reliability and cost effective-
ness. The device electrically erases all bits within a
sector simultaneously via Fowler-Nordheim tun-
neling. The data is programmed using hot electron
injection.
Am29LV010B
2
ADVANCE INFORMATION
PRODUCT SELECTOR GUIDE
Family Part Number
Speed Options
Regulated Voltage Range: V
CC
=3.0–3.6 V
Full Voltage Range: V
CC
= 2.7–3.6 V
Max access time, ns (t
ACC
)
Max CE# access time, ns (t
CE
)
Max OE# access time, ns (t
OE
)
45
45
30
-45R
-55
55
55
30
-70
70
70
35
-120
120
120
50
Am29LV010B
Note:
See “AC Characteristics” for full specifications.
BLOCK DIAGRAM
DQ0
DQ7
V
CC
V
SS
Erase Voltage
Generator
Input/Output
Buffers
Sector Switches
WE#
State
Control
Command
Register
PGM Voltage
Generator
Chip Enable
Output Enable
Logic
STB
Data
Latch
CE#
OE#
STB
V
CC
Detector
Timer
Address Latch
Y-Decoder
Y-Gating
X-Decoder
Cell Matrix
A0–A16
22140A-1
3
Am29LV010B
ADVANCE INFORMATION
CONNECTION DIAGRAMS
A11
A9
A8
A13
A14
NC
WE#
V
CC
NC
A16
A15
A12
A7
A6
A5
A4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
OE#
A10
CE#
DQ7
DQ6
DQ5
DQ4
DQ3
V
SS
DQ2
DQ1
DQ0
A0
A1
A2
A3
32-Pin Standard TSOP
OE#
A10
CE#
DQ7
DQ6
DQ5
DQ4
DQ3
V
SS
DQ2
DQ1
DQ0
A0
A1
A2
A3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32-Pin Reverse TSOP
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
A11
A9
A8
A13
A14
NC
WE#
V
CC
NC
A16
A15
A12
A7
A6
A5
A4
4 3 2 1 32 31 30
A7
A6
A5
A4
A3
A2
A1
A0
DQ0
5
6
7
8
9
10
11
12
13
14 15 16 17 18 19 20
V
SS
DQ3
DQ4
DQ1
DQ2
DQ5
DQ6
PLCC
29
28
27
26
25
24
23
22
21
A14
A13
A8
A9
A11
OE#
A10
CE#
DQ7
V
CC
A12
A15
WE#
NC
A16
NC
22140A-2
Am29LV010B
4
ADVANCE INFORMATION
PIN CONFIGURATION
A0–A16
= 17 addresses
DQ0–DQ7 = 8 data inputs/outputs
CE#
OE#
WE#
V
CC
= Chip enable
= Output enable
= Write enable
= 3.0 volt-only single power supply
(see Product Selector Guide for speed
options and voltage supply tolerances)
= Device ground
= Pin not connected internally
LOGIC SYMBOL
17
A0–A16
DQ0–DQ7
8
CE#
OE#
WE#
V
SS
NC
22140A-3
5
Am29LV010B
求助---采用EDA实现4位十进制数字密码锁
各位有这方面的资料吗,麻烦动一下手发送到我的邮箱啊 邮箱:tangkit@163.com 或者在这里讨论一下啊,也可以给我点提示。 谢谢。。。。。求助---采用EDA实现4位十进制数字密码锁...
oneonone FPGA/CPLD
关于ads编译工具的疑问
这两天开始在用,ads1.2写程序,发现那个ads1.2在写程序时,括号就不会有相应的配对提示吗,就是说两个括号{}是一对的,我把鼠标放在{旁边时候,另外一个}就不是显示成黑底或者其他的形式,提示说这两个括号是一对的,这样有时容易出错啊,还是我用的是旧版本的软件,如果是的话请大神给我个新版的啊关于ads编译工具的疑问...
865393435 嵌入式系统
格物致知02——两列光的拍频
格物致知02——两列光的拍频   以前我曾发布一个帖子《格物致知01——拍频》。链接http://bbs.eeworld.com.cn/thread-579258-1-1.html   在那个帖子里面我曾说:   ——————————————————   “拍”现像,在机械和电路中都很常见。   所谓“拍”,是指两个频率相近的正弦信号合成的一个较低频变幅信号。这里所说的信号,可以是电信号(电磁振动,通常称为电磁振荡),也可以是声音信号(机械振动)。   ———————————————...
maychang 综合技术交流
ST工业峰会2019邀您相聚深圳!
作为一次行业盛会,意法半导体工业峰会将为来自工业市场的各个领导者提供一个互相交流探索、推动创新发展的平台。本次工业峰会主要议程包括: 主题演讲–ST及合作伙伴公司高层将与您分享产品部署及发展战略,并带来最新的产品和解决方案技术研讨会–超过40个技术研讨会,与您深度探讨行业技术技术展台–ST及合作伙伴将展示最新的合作机器人、机械臂、照明系统、智能家居、工业自动化及预测性维护等超过100项产品及技术 日期与地点 2019年5月29日(星期三) 深圳君悦酒店(深圳...
eric_wang ST传感器与低功耗无线技术论坛
搞嵌入式开发的各位兄弟姐妹请进!
广东省嵌入式软件公共技术中心(www.gd-emb.org),我们属于美的旗下,拥有众多嵌入式专家团队。。 现新建QQ群: 嵌入式系统:43018176 单片机专区:43065855 半导体微电子:39925552 PCB,电源:43066247 欢迎各位嵌入式爱好者加入,我们定期举办活动,送Q币!搞嵌入式开发的各位兄弟姐妹请进!...
jackychen 嵌入式系统
EVC 4为何不能调试CE 5设备?
安装了EVC4+SP4,CE5SDK,但调试选项里的调试目标只有CE5SDK带的模拟器,却没有DEVICE的选项,不知何解? 还安装了PPC2003SDK,设备和模拟器都工作正常。 感谢!EVC4为何不能调试CE5设备?...
batmanliufan 嵌入式系统

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京ICP证060456号 京ICP备10001474号 电信业务审批[2006]字第258号函 京公海网安备110108001534 Copyright © 2005-2020 EEWORLD.com.cn, Inc. All rights reserved