电子工程世界电子工程世界电子工程世界

产品描述

搜索
 

Am29LV010BB-70FE

器件型号:Am29LV010BB-70FE
厂商名称:AMD
厂商官网:http://www.amd.com
下载文档

器件描述

1 Megabit (128 K x 8-Bit) CMOS 3.0 Volt-only Uniform Sector Flash Memory

文档预览

ADVANCE INFORMATION
Am29LV010B
1 Megabit (128 K x 8-Bit)
CMOS 3.0 Volt-only Uniform Sector Flash Memory
DISTINCTIVE CHARACTERISTICS
s
Single power supply operation
— Full voltage range: 2.7 to 3.6 volt read and write
operations for battery-powered applications
— Regulated voltage range: 3.0 to 3.6 volt read and
write operations and for compatibility with high
performance 3.3 volt microprocessors
s
Manufactured on 0.35 µm process technology
s
High performance
— Full voltage range: access times as fast as 55 ns
— Regulated voltage range: access times as fast
as 45 ns
s
Ultra low power consumption (typical values at
5 MHz)
— 200 nA Automatic Sleep mode current
— 200 nA standby mode current
— 7 mA read current
— 15 mA program/erase current
s
Flexible sector architecture
— Eight 16 Kbyte
— Supports full chip erase
— Sector Protection features:
Hardware method of locking a sector to prevent
any program or erase operations within that
sector
Sectors can be locked in-system or via
programming equipment
Temporary Sector Unprotect feature allows code
changes in previously locked sectors
s
Unlock Bypass Mode Program Command
— Reduces overall programming time when
issuing multiple program command sequences
s
Embedded Algorithms
— Embedded Erase algorithm automatically
preprograms and erases the entire chip or any
combination of designated sectors
— Embedded Program algorithm automatically
writes and verifies data at specified addresses
s
Minimum 1,000,000 write cycle guarantee per
sector
s
Package option
— 32-pin TSOP
— 32-pin PLCC
s
Compatibility with JEDEC standards
— Pinout and software compatible with single-
power supply Flash
— Superior inadvertent write protection
s
Data# Polling and toggle bits
— Provides a software method of detecting
program or erase operation completion
s
Erase Suspend/Erase Resume
— Supports reading data from or programming
data to a sector that is not being erased
This document contains information on a product under development at Advanced Micro Devices. The information
is intended to help you evaluate this product. AMD reserves the right to change or discontinue work on this proposed
product without notice.
Publication#
22140
Rev:
A
Amendment/0
Issue Date:
April 1998
ADVANCE INFORMATION
GENERAL DESCRIPTION
The Am29LV010B is a 1 Mbit, 3.0 Volt-only Flash
memory device organized as 131,072 bytes. The
Am29LV010B has a uniform sector architecture.
The device is offered in 32-pin PLCC and 32-pin TSOP
packages. The byte-wide (x8) data appears on DQ7–
DQ0. All read, erase, and program operations are
accomplished using only a single power supply. The
device can also be programmed in standard EPROM
programmers.
The standard Am29LV010B offers access times of 45,
55, 70, and 120 ns (90 and 100 ns parts are also avail-
able), allowing high speed microprocessors to operate
without wait states. To eliminate bus contention, the
device has separate chip enable (CE#), write enable
(WE#) and output enable (OE#) controls.
The device requires only a
single power supply
(2.7
V–3.6V) for both read and write functions. Internally
generated and regulated voltages are provided for the
program and erase operations.
The device is entirely command set compatible with the
JEDEC single-power-supply Flash standard.
Com-
mands are written to the command register using
standard microprocessor write timings. Register con-
tents serve as input to an internal state-machine that
controls the erase and programming circuitry. Write
cycles also internally latch addresses and data needed
for the programming and erase operations. Reading
data out of the device is similar to reading from other
Flash or EPROM devices.
Device programming occurs by executing the program
command sequence. This initiates the
Embedded
Program
algorithm—an internal algorithm that auto-
matically times the program pulse widths and verifies
proper cell margin. The
Unlock Bypass
mode facili-
tates faster programming times by requiring only two
write cycles to program data instead of four.
Device erasure occurs by executing the erase com-
mand sequence. This initiates the
Embedded Erase
algorithm—an internal algorithm that automatically
preprograms the array (if it is not already programmed)
before executing the erase operation. During erase, the
device automatically times the erase pulse widths and
verifies proper cell margin.
The host system can detect whether a program or
erase operation is complete by reading the DQ7 (Data#
Polling) and DQ6 (toggle)
status bits.
After a program
or erase cycle has been completed, the device is ready
to read array data or accept another command.
The
sector erase architecture
allows memory sectors
to be erased and reprogrammed without affecting the
data contents of other sectors. The device is fully
erased when shipped from the factory.
Hardware data protection
measures include a low
V
CC
detector that automatically inhibits write opera-
tions during power transitions. The
hardware sector
protection
feature disables both program and erase
operations in any combination of the sectors of mem-
ory. This can be achieved in-system or via program-
ming equipment.
The
Erase Suspend
feature enables the user to put
erase on hold for any period of time to read data from,
or program data to, any sector that is not selected for
erasure. True background erase can thus be achieved.
The device offers two power-saving features. When ad-
dresses have been stable for a specified amount of
time, the device enters the
automatic sleep mode.
The system can also place the device into the
standby
mode.
Power consumption is greatly reduced in both
these modes.
AMD’s Flash technology combines years of Flash
memory manufacturing experience to produce the
highest levels of quality, reliability and cost effective-
ness. The device electrically erases all bits within a
sector simultaneously via Fowler-Nordheim tun-
neling. The data is programmed using hot electron
injection.
Am29LV010B
2
ADVANCE INFORMATION
PRODUCT SELECTOR GUIDE
Family Part Number
Speed Options
Regulated Voltage Range: V
CC
=3.0–3.6 V
Full Voltage Range: V
CC
= 2.7–3.6 V
Max access time, ns (t
ACC
)
Max CE# access time, ns (t
CE
)
Max OE# access time, ns (t
OE
)
45
45
30
-45R
-55
55
55
30
-70
70
70
35
-120
120
120
50
Am29LV010B
Note:
See “AC Characteristics” for full specifications.
BLOCK DIAGRAM
DQ0
DQ7
V
CC
V
SS
Erase Voltage
Generator
Input/Output
Buffers
Sector Switches
WE#
State
Control
Command
Register
PGM Voltage
Generator
Chip Enable
Output Enable
Logic
STB
Data
Latch
CE#
OE#
STB
V
CC
Detector
Timer
Address Latch
Y-Decoder
Y-Gating
X-Decoder
Cell Matrix
A0–A16
22140A-1
3
Am29LV010B
ADVANCE INFORMATION
CONNECTION DIAGRAMS
A11
A9
A8
A13
A14
NC
WE#
V
CC
NC
A16
A15
A12
A7
A6
A5
A4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
OE#
A10
CE#
DQ7
DQ6
DQ5
DQ4
DQ3
V
SS
DQ2
DQ1
DQ0
A0
A1
A2
A3
32-Pin Standard TSOP
OE#
A10
CE#
DQ7
DQ6
DQ5
DQ4
DQ3
V
SS
DQ2
DQ1
DQ0
A0
A1
A2
A3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32-Pin Reverse TSOP
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
A11
A9
A8
A13
A14
NC
WE#
V
CC
NC
A16
A15
A12
A7
A6
A5
A4
4 3 2 1 32 31 30
A7
A6
A5
A4
A3
A2
A1
A0
DQ0
5
6
7
8
9
10
11
12
13
14 15 16 17 18 19 20
V
SS
DQ3
DQ4
DQ1
DQ2
DQ5
DQ6
PLCC
29
28
27
26
25
24
23
22
21
A14
A13
A8
A9
A11
OE#
A10
CE#
DQ7
V
CC
A12
A15
WE#
NC
A16
NC
22140A-2
Am29LV010B
4
ADVANCE INFORMATION
PIN CONFIGURATION
A0–A16
= 17 addresses
DQ0–DQ7 = 8 data inputs/outputs
CE#
OE#
WE#
V
CC
= Chip enable
= Output enable
= Write enable
= 3.0 volt-only single power supply
(see Product Selector Guide for speed
options and voltage supply tolerances)
= Device ground
= Pin not connected internally
LOGIC SYMBOL
17
A0–A16
DQ0–DQ7
8
CE#
OE#
WE#
V
SS
NC
22140A-3
5
Am29LV010B
I2C驱动提供了哪些接口给其他的驱动程序使用?
小弟要写一个挂在I2C总线上的设备的驱动,要通过I2C总线读写该设备中的寄存器,不知道WINCE的I2C总线驱动有没有提供一些读写接口给I2C总线设备驱动调用。如果有的话,接口的名称和参数是什么? 谢谢各位到本贴一游的达人!I2C驱动提供了哪些接口给其他的驱动程序使用?...
ttsurvive 嵌入式系统
单片机引脚控制继电器最简单的电路方式
首先要明确一点:单片机不能直接控制继电器,不管是3v的继电器还是5v的继电器。原因:比如51单片机和msp430单片机,引脚不能直接接继电器。虽然引脚的电压足够,但是由于电流不够,所以本应该闭合的线圈不会闭合。需要增加一个三极管来放大电流。说是放大电流,其实本质上是把引脚当成一个开关来控制真正3.3v电压的开合。下图是在实践中自己设计的可以正常工作的继电器模块。 单片机引脚控制继电器最简单的电路方式...
fish001 微控制器 MCU
设计人员必会的4-20mA电流环电路
本帖最后由charmfaith于2018-6-2821:40编辑 工业现场有许多过程控制系统,从简单的流量控制到复杂的电网,从环境控制系统到炼钢厂过程控制,这些控制系统由很多模块组成如中央处理单元,输入模块,模拟量输出,数字量输出,电源等等。不同模块之间需要进行数据通信,在众多现代通信方式中,还有一类相对古老的通信方式显得比较特殊,这就是4-20mA电流环。 4-20mA电流环yunrun.com.cn/tech/2055.html 4-20mA电流环(currentloop...
charmfaith 工控电子
赛灵思工业与医疗专题有奖问答!
活动名称:读专题赢大奖!      Xilinx工业与医疗专题,赢取USB加热杯垫! 活动时间:10月12日-11月11日 活动奖品:USB加热杯垫 活动形式: Step1 读专题:http://www.eeworld.com.cn/zhuanti/20120808Alterazhuanti/ Step2 答题:根据答题正确率及回答...
EEWORLD社区 FPGA/CPLD
新人,请指教万国半导体的AO3400封装怎么办?
原理图用到了AO3400,但发现元件库里没有这个器件怎么办?新人,请指教万国半导体的AO3400封装怎么办?...
aa自动化 PCB设计
WIN 2000下如何设计双网卡热备份
大家好?WIN2000下,双网卡热备份,也就是一个网卡坏了,另一个冗余网卡热切换,实现方案是什么?代码是什么?谢谢WIN2000下如何设计双网卡热备份...
223xh 嵌入式系统

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京ICP证060456号 京ICP备10001474号 电信业务审批[2006]字第258号函 京公海网安备110108001534 Copyright © 2005-2020 EEWORLD.com.cn, Inc. All rights reserved