Performance Masking Tape
Performance Masking Tape 2364 is a tan colored crepe paper masking tape
for general masking applications in the industrial market where good holding power
and temperature performance is required.
Smooth crepe paper treated
with a heat resistant saturant
Standard Roll Length
55 m (60.17 yds.)*
*Available in metric widths (e.g., 24 mm corresponds to 1 inch).
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
ASTM Test Method
Adhesion to Steel:
Elongation at Break:
Temperature Use Range:
31 oz./in. width (34 N/100 mm)
24 lbs./in. width (427 N/100 mm)
6.5 mils (0.165 mm)
Up to 300°F (149°C) for 30 minutes
• Has a strong backing, making it a good choice for general masking applications.
• Offers excellent holding at both room temperature and at a higher bake oven
• Has been laboratory tested on painted steel panels and found to remove cleanly
at bake temperatures up to 300°F (149°C) for 30 minutes. The actual temperature
and time performance may be higher or lower for a given application. Clean
removal can vary dependent on surface type, processing conditions such as
multiple bakes, type of paint involved as well as the temperature of the surface at
removal. We recommend testing the product under your conditions to determine
if it meets your needs.
• Should not be subjected to outdoor exposure or prolonged periods of sunlight as
tape may become difficult to remove.
Scotch Performance Masking Tape
Store under normal conditions of 70°F (21°C) and 50% R.H. in the original carton.
To obtain best performance, use this product within one year from date of
The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
ISO 9001: 2008
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2008 standards.
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (Fax)
Scotch is a registered trademark of 3M.
Printed in U.S.A.
©3M 2011 70070948396 (2/11)