电子工程世界电子工程世界电子工程世界

型号

产品描述

搜索
 

164005003

器件型号:164005003
文件大小:0KB,共0页
厂商名称:ALLTHREAD [ALLTHREAD]
下载文档

器件描述

文档预览

164005003器件文档内容

The MSDS format adheres to the standards and regulatory requirements
     of the United States and may not meet regulatory requirements
                                           in other countries.

                          DuPont                    Page 1
        Material Safety Data Sheet

----------------------------------------------------------------------

        "ZYTEL" NYLON RESIN ON SYNONYM LIST ZYT022

ZYT022                     Revised 4-OCT-2005

----------------------------------------------------------------------

----------------------------------------------------------------------

CHEMICAL PRODUCT/COMPANY IDENTIFICATION

----------------------------------------------------------------------

Material Identification

"ZYTEL" is a registered trademark of DuPont.

# Tradenames and Synonyms

"ZYTEL" AFE1000 NC010,
"ZYTEL" AFE1001 NC010,
"ZYTEL" AFE1002 NC010,
"ZYTEL" AFE1002I NC010,
"ZYTEL" AFE1003 NC010,
"ZYTEL" AFE1003I NC010,
"ZYTEL" AFE1111 NC010,
"ZYTEL" CFE1111 NC010.
"ZYTEL" E41HSB NC010.
"ZYTEL" E50 NC010,
"ZYTEL" E51HSB NC010,
"ZYTEL" E51HSB NC010J,
"ZYTEL" E53 NC010,
"ZYTEL" E55 NC010,
"ZYTEL" E101L NC010,
"ZYTEL" E103HSL NC010,
"ZYTEL" EFE1032 NC010E,
"ZYTEL" EFE1068 NC010,
"ZYTEL" EFE1068 NC010T,
"ZYTEL" EFE1068 NC010TA,
"ZYTEL" EFE1117 NC010,
"ZYTEL" EFE1150 NC010,
"ZYTEL" EFE1151 NC010,
"ZYTEL" FE1111 NC010,
"ZYTEL" FE210021 NC010,
"ZYTEL" FE3370 NC010,
"ZYTEL" FE3399 BKB160,
"ZYTEL" FE3415 NC010,
"ZYTEL" FE3421 NC010,
"ZYTEL" FE3491C NC010,
"ZYTEL" FE3606 NC010,
"ZYTEL" FE3653 NC010,
"ZYTEL" FE3677 NC010,
"ZYTEL" FE3684 NC010,
"ZYTEL" FE3701 NC010A,
"ZYTEL" FE3704 NC010,
"ZYTEL" FE3705 NC010,
ZYT022                                DuPont                   Page 2
                    Material Safety Data Sheet

        (CHEMICAL PRODUCT/COMPANY IDENTIFICATION - Continued)

"ZYTEL" FE3747 NC010,

"ZYTEL" FE3748 NC010,

"ZYTEL" FE3749 NC010,

"ZYTEL" FE3754 NC010,

"ZYTEL" FE3755 NC010,

"ZYTEL" FE3756 NC010,

"ZYTEL" FE3797 NC010,

"ZYTEL" FE3807 NC010,

"ZYTEL" FE3826 BKB160,

"ZYTEL" FE3827 NC010,

"ZYTEL" FE3832 NC010,

"ZYTEL" FE310036 NC010,

"ZYTEL" FE310043 NC010,

"ZYTEL" FE310045 NC010

"ZYTEL" FE310050 NC010,

"ZYTEL" FE310052F NC010

"ZYTEL" FE310063 NC010,

"ZYTEL" FE310081 NC010,                                        #

"ZYTEL" VLM NC010,

"ZYTEL" 10ABG NC010,

"ZYTEL" 10ABGD NC010,

"ZYTEL" 10ANG NC010,

"ZYTEL" 101 NC010,

"ZYTEL" 101F NC010,

"ZYTEL" 101F NC010N,

"ZYTEL" 101F NC999,

"ZYTEL" 101L NC010,

"ZYTEL" 103FHS NC010,

"ZYTEL" 103HS NC010,

"ZYTEL" 103HSL NC010,

"ZYTEL" 113 NC010,

"ZYTEL" 122L NC010,

"ZYTEL" 132F NC010.

"ZYTEL" 135F NC010,

"ZYTEL" 148 NC010,

"ZYTEL" 42A NC010,

"ZYTEL" 42A NC010A,

"ZYTEL" 42HSX NC010,

"ZYTEL" 45HSB NC010,

Company Identification

MANUFACTURER/DISTRIBUTOR
                           DuPont Engineering Polymers
                           1007 Market Street
                           Wilmington,DE 19898

PHONE NUMBERS           : 1-(800)-441-7515
   Product Information  : 1-(800)-424-9300
   Transport Emergency  : 1-(800)-441-3637
   Medical Emergency
ZYT022                                  DuPont                     Page 3
                      Material Safety Data Sheet

   ----------------------------------------------------------------------
   COMPOSITION/INFORMATION ON INGREDIENTS
   ----------------------------------------------------------------------
# Components

Material                                CAS Number %
POLYHEXAMETHYLENE ADIPAMIDE (NYLON 66)  32131-17-2 >98
LUBRICANTS, STABILIZERS
                                                               <2

Components (Remarks)

Material is not known to contain Toxic Chemicals under Section 313
of Title III of the Superfund Amendments and Reauthorization Act
of 1986 and 40 CFR part 372.

----------------------------------------------------------------------
HAZARDS IDENTIFICATION
----------------------------------------------------------------------
Potential Health Effects

ADDITIONAL HEALTH EFFECTS

Read the datasheet for this product or the molding guide for this
resin family.

     POLYHEXAMETHYLENE ADIPAMIDE

     In general, skin irritation has not been produced in human patch
     tests with Nylon 66. However, a small percentage of subjects may
     respond to prolonged contact with redness of skin. Significant
     skin permeation, and systemic toxicity, after contact appears
     unlikely. There are no reports of human sensitization.

     If particles of Nylon 66 contact the eye, mechanical irritation
     with tearing, pain or blurred vision may result.

Carcinogenicity Information

None of the components present in this material at concentrations
equal to or greater than 0.1% are listed by IARC, NTP, OSHA or ACGIH
as a carcinogen.

----------------------------------------------------------------------
FIRST AID MEASURES
----------------------------------------------------------------------
First Aid

     INHALATION
     No specific intervention is indicated as the compound is not
     likely to be hazardous by inhalation. Consult a physician if
     necessary. If exposed to fumes from overheating or combustion,
     move to fresh air. Consult a physician if symptoms persist.

     SKIN CONTACT
ZYT022                                 DuPont     Page 4
                     Material Safety Data Sheet

                (FIRST AID MEASURES - Continued)

The compound is not likely to be hazardous by skin contact, but
cleansing the skin after use is advisable. If molten polymer gets
on skin, cool rapidly with cold water. Do not attempt to peel
polymer from skin. Obtain medical treatment for thermal burn.

EYE CONTACT
In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes. Call a physician.

INGESTION
No specific intervention is indicated as compound is not likely to
be hazardous by ingestion.

   ----------------------------------------------------------------------
   FIRE FIGHTING MEASURES
   ----------------------------------------------------------------------
# Flammable Properties

Flash Point                 : Not Applicable

Fire and Explosion Hazards:

Like most organic materials in powder form, dust generated from
this product may form a flammable dust-air mixture. Potential for
a dust explosion may exist. Minimize the generation and
accumulation of dust. Keep away from sources of ignition.

Large molten masses may ignite spontaneously in air. Water
quenching of such masses is good practice.

Hazardous gases/vapors produced in fire are ammonia, carbon
monoxide, traces of hydrogen cyanide, aldehydes.

Extinguishing Media

Water, Foam, Dry Chemical, CO2.

Fire Fighting Instructions

Keep personnel removed and upwind of fire. Wear self-contained
breathing apparatus.

----------------------------------------------------------------------
ACCIDENTAL RELEASE MEASURES
----------------------------------------------------------------------
Safeguards (Personnel)

NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL)
sections before proceeding with clean-up. Use appropriate
PERSONAL PROTECTIVE EQUIPMENT during clean-up.

Spill Clean Up

Spilled material is a slipping hazard.
ZYT022                         DuPont                      Page 5
             Material Safety Data Sheet

         (ACCIDENTAL RELEASE MEASURES - Continued)

Sweep up to avoid slipping hazard.

----------------------------------------------------------------------
HANDLING AND STORAGE
----------------------------------------------------------------------
Handling (Personnel)

See FIRST AID and PERSONAL PROTECTIVE EQUIPMENT SECTIONS.

Handling (Physical Aspects)

Minimize the generation and accumulation of dust.

Storage

Store in a cool, dry place. Keep containers tightly closed to
prevent moisture absorption and contamination.

----------------------------------------------------------------------
EXPOSURE CONTROLS/PERSONAL PROTECTION
----------------------------------------------------------------------
Engineering Controls

VENTILATION When hot processing this material, use local and/or
general exhaust ventilation to control the concentration of vapors
and fumes below exposure limits.

In cutting or grinding operations with this material, use local
exhaust to control the concentration of dust below exposure limits.

Personal Protective Equipment

Eye/Face Protection

Wear safety glasses. Wear coverall chemical splash goggles and
face shield when possibility exists for eye or face contact due to
splashing or spraying of molten material. A full face mask
positive-pressure air-supplied respirator provides protection from
eye irritation.

Respirators

A NIOSH/MSHA approved air-purifying respirator with an organic
vapor cartridge with a dust/mist filter may be permissible under
certain circumstances where airborne concentrations are expected
to exceed exposure limits. Use a positive-pressure air-supplied
respirator if there is any potential for an uncontrolled release,
exposure levels are not known, or any other circumstances where
air-purifying respirators may not provide adequate protection.

During grinding, sawing, routing, drilling or sanding operations
use a NIOSH/MSHA approved air-purifying respirator with dust/mist
cartridge or canister if airborne particulate concentrations are
expected to exceed permissible exposure levels.
ZYT022                                 DuPont                Page 6
                     Material Safety Data Sheet

        (EXPOSURE CONTROLS/PERSONAL PROTECTION - Continued)

Protective Clothing

If there is potential contact with hot/molten material, wear heat
resistant clothing and footwear.

Wear leather or cotton gloves when grinding, sawing, routing,
drilling or sanding.

Exposure Guidelines

Exposure Limits

"ZYTEL" NYLON RESIN ON SYNONYM LIST ZYT022

PEL (OSHA)           : Particulates (Not Otherwise Regulated)

                     15 mg/m3, 8 Hr. TWA, total dust

                     5 mg/m3, 8 Hr. TWA, respirable dust

Other Applicable Exposure Limits

POLYHEXAMETHYLENE ADIPAMIDE (NYLON 66)

PEL (OSHA)           : None Established

TLV (ACGIH)          : None Established

AEL * (DuPont)       : 10 mg/m3, 8 Hr. TWA, total dust

                     5 mg/m3, 8 Hr. TWA, respirable dust

* AEL is DuPont's Acceptable Exposure Limit. Where governmentally
imposed occupational exposure limits which are lower than the AEL
are in effect, such limits shall take precedence.

   ----------------------------------------------------------------------
   PHYSICAL AND CHEMICAL PROPERTIES
   ----------------------------------------------------------------------
# Physical Data

Melting Point        : >200 C (>392 F)
Solubility in Water  : Insoluble
Odor                 : None
Form                 : Pellets
Specific Gravity     : >1.0

----------------------------------------------------------------------
STABILITY AND REACTIVITY
----------------------------------------------------------------------
Chemical Stability

Stable at normal temperatures and storage conditions.

Conditions to Avoid

Temperatures above 340 C (644 F) .

Incompatibility with Other Materials

Incompatible or can react with strong acids, oxidizing agents.
ZYT022                               DuPont             Page 7
                   Material Safety Data Sheet

                (STABILITY AND REACTIVITY - Continued)

Decomposition

Hazardous gases or vapors can be released, including ammonia,
carbon monoxide, cyclopentanone, hydrogen cyanide, nitrogen oxides.

Polymerization

Polymerization will not occur.

----------------------------------------------------------------------
TOXICOLOGICAL INFORMATION
----------------------------------------------------------------------
Animal Data

Nylon 66
   Oral LD50, rat: > 10,000 mg/kg

Nylon 66 is not a skin irritant in tests with animals.

Single exposure by ingestion to high doses caused decreased body
weight. Long-term exposure caused no significant toxicological
effects.

Repeated insufflation exposure caused histopathological changes of
the lungs, and kidneys.

In animal testing Nylon 66 has not caused carcinogenicity. No
animal data are available to define developmental, reproductive or
mutagenic hazards.

----------------------------------------------------------------------
ECOLOGICAL INFORMATION
----------------------------------------------------------------------
Ecotoxicological Information

AQUATIC TOXICITY:

No information is available. Toxicity is expected to be low based
on insolubility in water. Do not discharge to streams, ponds,
lakes or sewers.

----------------------------------------------------------------------
DISPOSAL CONSIDERATIONS
----------------------------------------------------------------------
Waste Disposal

Preferred options for disposal are (1) recycling, (2) incineration
with energy recovery, and (3) landfill. The high fuel value of
this product makes option 2 very desirable for material that
cannot be recycled, but incinerator must be capable of scrubbing
out acidic combustion products. Treatment, storage,
transportation, and disposal must be in accordance with applicable
federal, state/provincial, and local regulations.
ZYT022                       DuPont                    Page 8
           Material Safety Data Sheet

----------------------------------------------------------------------
TRANSPORTATION INFORMATION
----------------------------------------------------------------------
Shipping Information

Not regulated in transportation by DOT/IMO/IATA.

----------------------------------------------------------------------
REGULATORY INFORMATION
----------------------------------------------------------------------
U.S. Federal Regulations

TSCA Inventory Status : In compliance with TSCA Inventory
                                               requirements for commercial purposes.

State Regulations (U.S.)

STATE RIGHT-TO-KNOW LAWS

No substances on the state hazardous substances list, for the
states indicated below, are used in the manufacture of products on
this Material Safety Data Sheet.

SUBSTANCES ON THE PENNSYLVANIA HAZARDOUS SUBSTANCES LIST PRESENT
AT A CONCENTRATION OF 1% OR MORE (0.01% FOR SPECIAL HAZARDOUS
SUBSTANCES): None known.

WARNING: SUBSTANCES KNOWN TO THE STATE OF CALIFORNIA TO CAUSE
CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM: None known.

SUBSTANCES ON THE NEW JERSEY WORKPLACE HAZARDOUS SUBSTANCE LIST
PRESENT AT A CONCENTRATION OF 1 % OR MORE (0.1% FOR SUBSTANCES
IDENTIFIED AS CARCINOGENS, MUTAGENS OR TERATOGENS): None known.

----------------------------------------------------------------------
OTHER INFORMATION
----------------------------------------------------------------------
Additional Information

MEDICAL USE: CAUTION: Do not use in medical applications
involving permanent implantation in the human body. For other
medical applications see DuPont CAUTION Bulletin No. H-50102.

----------------------------------------------------------------------

The data in this Material Safety Data Sheet relates only to the
specific material designated herein and does not relate to use in
combination with any other material or in any process.

Responsibility for MSDS : REGULATORY AFFAIRS

                          DUPONT ENGINEERING POLYMERS

Address                   : CHESTNUT RUN PLAZA 713

                          WILMINGTON, DE 19880-0713

Telephone                 : 302-999-4257

# Indicates updated section.
ZYT022                    DuPont    Page 9
        Material Safety Data Sheet

        (Continued)

This information is based upon technical information believed to be
   reliable. It is subject to revision as additional knowledge and
                                         experience is gained.

        End of MSDS

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京ICP证060456号 京ICP备10001474号 电信业务审批[2006]字第258号函 京公海网安备110108001534 Copyright © 2005-2017 EEWORLD.com.cn, Inc. All rights reserved