电子工程世界电子工程世界电子工程世界

关键词

搜索

型号

搜索
 

1600DGG100A1EFA

器件型号:1600DGG100A1EFA
器件类别:传感器    传感器/换能器   
厂商名称:Gems Sensors & Controls
下载文档

器件描述

Strain Guage Sensor, Gage, 0Psi Min, 100Psi Max, 0.5%, 1-11V,

参数
是否无铅含铅
是否Rohs认证不符合
Reach Compliance Codecompli
最大精度 (%)0.5%
主体高度53.2 mm
主体长度或直径27.3 mm
外壳STAINLESS STEEL
标称偏移1V
最高工作温度125 °C
最低工作温度-40 °C
输出范围1-11V
输出类型ANALOG VOLTAGE
端口类型R1/4 EXTERNAL
最大压力范围100 Psi
最小压力范围
压力传感模式GAGE
响应时间500 µs
传感器/换能器类型PRESSURE SENSOR,STRAIN GUAGE
最大供电电压35 V
最小供电电压1.5 V
端接类型CABLE
Base Number Matches1

文档预览

PSIBAR® CVD TYPES
Gauge, Vacuum, and Compound Pressure Models
General Purpose and Wash down Enclosures
High Proof Pressure Achieved by Thicker Diaphragm Construction
Voltage and Current Output Models
The 1200 Series features stability and toughness via its CVD and ASIC design coupled
with a thicker diaphragm. The thicker diaphragm enables these sensors to survive
most pressure spikes caused by pump ripple, solenoid valves, etc. The 1600 Series
extends the packaging options by providing an all welded stainless steel back end
for demanding industrial applications. A modular design allows special ordering of
fittings, electrical cables, etc. for OEM applications. The ASIC and CVD technology
enables Gems to offer almost any output over any pressure range.
Specifications
Input
Pressure Range
Proof Pressure
Burst Pressure
Fatigue Life
Performance
Supply Voltage Sensitivity
Long Term Drift
Accuracy
Thermal Error
Compensated Temperatures
Operating Temperatures
Vacuum to 400 bar (6000 psi)
4 x Full Scale (FS) (<1% FS Zero Shift)
>35 x FS <= 4 bar (60 psi);
>20 x FS <=40 bar (600 psi);
>5 x FS <= 400 bar (6000 psi)
Designed for more than 100 million FS cycles
0.01% FS/Volt
0.2% FS/year (non-cumulative)
0.5% FS typical
2.0% FS typical
-20°C to 80°C (-5°F to 180°F)
-40°C to 125°C (-40°F to 260°F) for elec. codes A, B, C, 1
-20°C to 80°C (-5°F to 180°F) for elec. codes 2, D, G, 3
-20°C to 50°C (-5°F to 125°F) for elec. code F
temperatures >100°C supply is limited to 24 VDC
1% of span
1% of span
0.5 ms
see ordering chart
17-4 PH Stainless Steel
see ordering chart
316 SS, 17-4 PH ss
IP65 NEMA 4 for elec. codes A,B,C,D,G,1,2,3
IP67 for elec. codes F
IP30 for elec. code “3” with flying leads
70g, peak to peak sinusoidal, 5 to 2000 Hz
(Random Vibration: 20 to 200 Hz @
20g
Peak
per MIL-STD.-810E Method 514.4)
100g steady acceleration in any direction 0.032% FS/g
for 1 bar (15 psi) range decreasing logarithmically
to 0.0007% FS/g for 400 bar (6000 psi) range.
20g, 11 ms, per MIL-STD.-810E Method 516.4 Procedure I
CE, UR (12 ET, 16 ET Intrinsically safe)
approx. 100 grams (additional; cable 75 g/m)
Along with the superiority of the CVD strain gauge,
Psibar
®
transducers incorporate components to
leverage the sensing element’s strength. The output is
a product with a unique balance of performance and
value unmatched in today’s pressure sensing market.
Thicker diaphragm for handling
pulsating pressures –
all stainless steel wetted parts.
CVD sensor stability and high
sensitivity allows use of our
thicker diaphragm. 17-4 PH SS
sensor beam is laser welded for
distortion-free construction.
Weldless
stainless steel
case.
Zero Tolerance
Span Tolerance
Response Time
Mechanical Configuration
Pressure Port
Wetted Parts
Electrical Connection
Enclosure
ASIC chip is the brains
behind the brawn.
Programmability provides
greater linearity correction
than common thermal
compensation methods.
RFI/EMI & ESD protection circuit
meets and exceeds requirements for
CE marking. Protecting against noise,
voltage spikes and static discharge.
Vibration
Acceleration
Shock
Approvals
Weight
www.gemssensors.com
G-7
PRESSURE TRANSDUCERS
1200 Series / 1600 Series –
OEM Transducers Featuring Exceptional
Proof Pressure and Stability Specifications
Individual Specifications
Voltage Output units
Output
Supply Voltage (Vs)
Min. Load Resistance
Current Output units
Output
Supply Voltage (Vs)
Max. Loop Resistance
Electrical Connection Cable
A, B, G
“DIN”
C
D
F
1
2
3
“10-6 Bayonet”
“cable”
“IP 67 cable”
“8-4 Bayonet”
“cable”
“conduit & cable”
PIN
PIN
PIN
See ordering chart
1.5 VDC above span to 35 VDC
(FS output / 2) Kohms
4-20 mA (2 wire)
24 VDC, (7-35 VDC)
(Vs-7) x 50 ohms
Voltage Units
IN+
1
A
R
R
A
R
R
COM
2
C
BK
BK
C
BK
BK
OUT+
3
B
W
W
B
W
W
4
E
DRAIN
DRAIN
D
DRAIN
DRAIN
Current Units (4-20 mA)
EARTH (+)
1
A
R
R
A
R
R
(–)
2
B
BK
BK
B
BK
BK
EARTH
4
E
DRAIN
DRAIN
D
DRAIN
DRAIN
POWER SUPPLY
(-)
(+)
IN (+)
COMMON
VOLTAGE
OUTPUT
TRANSDUCER
(-)
READOUT
POWER SUPPLY
(-)
(+)
(+)
OUT(+)
PRESSURE TRANSDUCERS
G-8
+
(+)
CURRENT
OUTPUT
TRANSDUCER
(-)
READOUT
(-)
Cable Legend:
R = Red
BL = Blue
BK = Black
W = White
Y = Yellow
Electromagnetic Capability
Meets the requirement for CE marking of EN50081-2 for emissions and EN50082-2
for susceptibility.
Test Data:
• EN61000-4-2 Electrostatic Discharge. 8kV air discharge, 4kV contact discharge.
Unit survived.
• ENV50140 Radiated RF Susceptibility. 10V/m, 80MHz-1GHz, 1kHz mod.
Maximum recorded output error was <±1%
• ENV50204 Radiated RF Susceptibility to Mobile Telephones. 10V/m, 900MHz.
Maximum recorded output error was <±1%.
• EN61000-4-4 Fast Burst Transient. 2kV, 5/50ns, 5kHz for 1 minute. Unit survived.
• ENV50141 Conducted RF Susceptibility. 10Vms, 1kHz mod, 150kHz - 80MHz.
Maximum recorded output error was <±1%
Table 1 - Cable Length
Code
U
D
E
F
G
H
J
K
L
Length (M)
No Cable Fitted
1
3
5
10
15
20
25
30
Code
M
N
P
Q
R
S
4
5
6
Length (M)
40
50
75
100
125
150
170
200
225
Monitor Liquid Level with Gems Psibar
®
Pressure Transducers
Continuously Monitor Liquid Levels
Stainless Steel Wetted Parts are Compatible With Most Fluids
Mount Through Top or Side of Tanks
Digital Panel Meter
Gems Psibar
®
pressure transducers provide a great, cost-effective
method for measuring liquid levels. From measuring inventories in
process storage tanks to monitoring hot water feed tanks, our design
flexibility promotes easy installation, with mounting either through the
tank top or from the side.
Getting Started…
Tank content is be determined from the pressure exerted on the
sensor, so you need to know the depth
and
the specific gravity of
the liquid being measured. When these two factors are known, the
following equation can be used to determine the pressure range
needed to specify an applicable pressure transducer:
Pressure in PSI = Liquid Level (in feet) x (Specific Gravity x 0.433)
Example:
Tank Level:
Pressure in PSI = Liquid Level (in feet) x (Specific Gravity x 0.433)
Pressure in PSI = 30 x (1.0 x 0.433)
Pressure in PSI = 12.99 PSI
Using a Psibar Series 1200, 1600, 2200 or 2600 transducer, specify
Pressure Range code
F15
(0-15 PSI).
www.gemssensors.com
115V
115 VAC
1/2˝ NPT
Custom 2˝ NPTM
J-Box/Flange
Assembly
P/N 7800629
CONSULT
FACTORY
Immersible
Pressure Transducer
Any Gems
Transducer
Nose Cone
Dimensions
1200 Series
Mini 4 Pin
Delivery
on Most Transducers
3
-Day
1600 Series
IP67 or NEMA 4
Cable
Code D
or 2
10-6 or 8-4
Mil-C Connector
Large DIN
43650 Plug
Conduit Connector
with Cable
PSIBAR® CVD TYPES
Code A
Code F
10-6 Code C
8-4 Code 1
Code G
Code 3
Code 3 with
length U
1/2”
NPT
26.0
1.02
35.0
1.37
70.1
2.76
68
2.65
MAX
22
MAX 0.87
33.0
1.30
MAX
43
MAX 1.70
43
MAX 1.70
1/2”
NPT
61.60
MAX 2.43
27.3 MAX
1.07
53.2
MAX 2.09
27.3
1.07 MAX
1/8 NPT
1/4-18 NPT
1/4-18 NPT
Internal
24
0.95
1/2-14 NPT
7/16 - 20 UNF-2A
(SAE J514)
9/16-18 UNF-2A
G 1/8
G1/4 External
R 1/4
15
MAX 0.59
20
MAX 0.79
MAX 26.0
1.02
19
MAX 0.75
MAX
17
0.67
17
MAX 0.67
20
0.79
Code 08
(0J with snubber)
Code 02
Code 0E
Code 0H
Code 04
Code IP
Code 09
Code 01
Code 0A
How to Order
Use the
bold
characters from the chart below to construct a product code
1600
Series
1200
Output
B
- 4-20mA
C
- 1-6V
D
- 1-11V
H
- 1-5V
Datum
G
- Gauge
Pressure Range
3
- psi
F15
- 0-15
F30
- 0-30
F60
- 0-60
G10
- 0-100
G15
- 0-150
G20
- 0-200
G30
- 0-300
G50
- 0-500
Pressure Range
3
- bar
A10
- 0-1
A16
- 0-1.6
A25
- 0-2.5
A40
- 0-4
A60
- 0-6
B10
- 0-10
B16
- 0-16
G60
- 0-600
H10
- 0-1.000
H15
- 0-1.500
H20
- 0-2.000
H30
- 0-3.000
H40
- 0-4.000
H50
- 0-5.000
H60
- 0-6.000
B25
- 0-25
B40
- 0-40
B60
- 0-60
C10
- 0-100
C16
- 0-160
C25
- 0-250
C40
- 0-400
Vac
= -15 psi
1F5
- Vac-0
3F0
- Vac-15
6F0
- Vac-45
1G0
- Vac-135
1G5
- Vac-135
2G0
- Vac-185
3G0
- Vac-285
Vac
= -1 bar
1A0
- Vac-0
1A6
- Vac-0.6
2A5
- Vac-1.5
4A0
- Vac-3
6A0
- Vac-5
1B0
- Vac-9
1B6
- Vac-15
2B5
- Vac-24
4B0
- Vac-39
1600
12 ET
4
J
- 0.5-5.5V
R
- 0-5V
S
- 0-10V
16 ET
4
B
G
A60
01
D
3
D
A
Performance Code
Cable Length
1
U
- None
D
- 1m (3ft)
E
- 3m (9ft)
F
- 5m (16ft)
G
- 10m (32ft)
Apparatus Protection
3
- Amplified Only RFI Protected CE Mark, UR
E
- Amplified only IS mark (Div. 1 only)
4
T
- Amplified only IS mark (Div. 1 and 2)
4 5
Electrical Connection
1200 Series
A
- Mini Din with mate
B
- Mini Din without mate
F
- IP67 Weatherproof
Cable Gland
2
2
- NEMA 4 Cable
2
1600 Series
C
- 10-6 Mil C Connector
1
- 8-4 Mil C Connector
G
- Large DIN 43650 Plug
3
- Conduit Connector
with 1 Meter Leads
(for cable specify length code)
Pressure Port
European Threads
08
- 1/8-27 NPT External
09
- G 1/8 Internal
02
- 1/4-18 NPT External
01
- G 1/4 External
0J
- 1/4 NPT External w/snubber
0A
- R 1/4 External
0E
- 1/4 NPT Internal
0H
-1/2-14 NPT External
04
- 7/16-20 External (SAE #4, J514)
1P
- 9/16-18 External (SAE #6, J1926-2)
IJ
- 7/16-20 External (SAE #4, J1926-2)
Notes:
1. When electrical connection is cable please select a cable length from Table 1 (opposite page).
When electrical connection is DIN or plug style “U” must be specified.
2. Electrical Connections “F” and “2” are 24AWG, Shielded, PVC Cable.
3. Additional Pressure Ranges are available. Please consult factory.
4. Intrinsically safe transducers are available with amplified outputs only.
(ETL, entity approved for Class I, Division 1, Groups C & D, hazardous areas; Class I, Divisions 1 and 2,
Groups C & D for Electrical Connection Codes
-A, -B, -G
or
-3
only.)
5. Apparatus Protection Code
-T
is available for Electrical Connection Codes
-A, -B, -G
or
-3
only.
www.gemssensors.com
G-9
PRESSURE TRANSDUCERS
IP67 Cable
(Weatherproof)
Conduit Connector
with Flying Leads

技术资料推荐

论坛推荐

技术视频推荐

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
搜索索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
器件入口   3G 4F 5B 5C 8G 8X AC AE AT AU D4 N8 NF Si XF

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2021 EEWORLD.com.cn, Inc. All rights reserved