电子工程世界电子工程世界电子工程世界

产品描述

搜索

13426

器件型号:13426
器件类别:工具与设备   
厂商名称:AIM
厂商官网: www.aimsolder.com
下载文档

器件描述

Solder Sn63/Pb37 GLOWCORE2% .032 DIA. 1 lb.

参数
产品属性属性值
Product AttributeAttribute Value
制造商:
Manufacturer:
AIM - American Iron and Metal
产品种类:
Product Category:
Solder
RoHS:N
产品:
Product:
Solder
类型:
Type:
Wire, Rosin Core
Alloy:Sn63/Pb37
Description/Function:Glow Core no-clean
直径:
Diameter:
0.032 in
Core Size:2 %
Package Type:Spool
商标:
Brand:
AIM
Contains Lead:By Request
工厂包装数量:
Factory Pack Quantity:
48

13426器件文档内容

                                           Glow Core

                                No-Clean Cored Wire Solder

Features:

- Excellent Wetting     - Wide Process Window       - Cleanable with Saponifier  - Lead-Free Compatible

Description:

Glow Core is a no-clean, resin-based flux cored wire solder designed to offer excellent wetting characteristics and

lead-free compatibility. This product is very active and is recommended for fast cycle time soldering. Glow Core

flux promotes good thermal transfer, offering better solder penetration into plated through holes or surface mount

interconnections. Glow Core cored wire produces low-to-medium post-process residues that are electrically safe

and do not require cleaning for most applications.

Availability:

-  Glow Core is standard with a 2.0% flux core for tin-lead (2.5% flux core for lead-free) alloys.

-  Glow Core is available in Sn/Pb, Sn/Ag/Cu, SN100C® alloys.

-  Standard spool sizes: ½ lb. for .010 and .015 diameters, and 1lb. for .020, .032, .040, .050 and .062 diameters.

-  Packaging of ½ lb. and 1 lb. spools is available in 12 lb. and 24 lb. cases.

-  Other flux percentages, alloys, diameters and spool sizes may be available upon special request.

Application:

-  Solder iron tip temperature should be between 350° - 400°C (650° - 750°F ) for Sn63, Sn62 and Sn60 alloys,

   370° - 425°C (700° - 800°F) for SN100C®, Sn/Ag and Sn/Ag/Cu (SAC305, SAC405, CASTIN, etc.) alloys.

-  Hold the solder iron tip at a 45° to 60° angle to the work surface.

-  The solder iron should contact both the component lead and PCB pad surface.

-  Solder and flux should flow onto the lead and pad or lead and barrel to promote optimum flux activity for the

   joint being worked.

-  If additional flux is needed, the use of AIM’s NC266-3 flux is recommended. Operators should use an

   applicator capable of dispensing precise amounts of flux to eliminate over-saturation and excessive spread.

Cleaning:

Glow Core can be cleaned with saponified tap water or an alcohol and water blend. AIMTERGE 520 is

recommended. A water temperature of 60ºC (140°F) is recommended, and should be adequate for removing any

post process residues.

Handling and Storage:

-  Glow Core cored wire has an indefinite shelf life when proper storage conditions are observed.

-  Store Glow Core in a clean, dry area away from moisture and sunlight.

-  Do not freeze this product.

Safety:

-  Use with adequate ventilation and proper personal protective equipment.

-  Refer to the accompanying MSDS for any specific emergency information.

-  Do not dispose of any hazardous materials in non-approved containers.

Classification:

                                Parameter           Value

                                J-STD-004           REL0
Surface Insulation Resistance:

General References

AIM Glowcore S Series cored wire solder was tested to J-STD-004 and IPC-TM-650 method                                           2.6.3.7,  Surface  Insulation

Resistance.

Sample and Instrumentation

Cored Wire Solder: Glowcore S Series

Test Board: IPC-B-24, bare copper

Environmental Chamber: Thermotron SE-300

Electrical Testing Equipment: AUTO SIR Test System

Test Condition

Temperature/Humidity:    40oC/ 90%RH

Test/Bias Voltage: 10V

Test Duration: 7 days, 10080 minutes in total, tested every 20 minutes

Pass-Fail Criteria

IPC J-STD-004B §3.4.1.4.1

All measurements on all test patterns shall be exceed the 100 MΩ

No evidence of electrochemical migration that reduces conductor spacing by more than 20%

No corrosion of the conductors

Test Results

Test Data (see chart)                                                      PASS

Presence of Dendrites                                                      NO

Maximum Percent Reduction of Spacing                                       0%

Presence of Discoloration Between Conductors                               NO

Presence of Water Spots                                                    NO

Presence of Subsurface Metal Migration                                     NO

Result Chart:

                                    13

                                    12

                                    11

                                    10

                           Log SIR  9

                                    8

                                    7

                                    6

                                    5

                                        0  1               2               3              4   5              6               7

                                                                              Time, day

                                           Glowcore S4 1   Glowcore S4 2       Glowcore S4 3  Glowcore S4 4  Glowcore S4 5

                                           Glowcore S4 6   Glowcore S4 7       Glowcore S4 8  Glowcore S4 9  Glowcore S4 10

                                           Glowcore S4 11  Glowcore S4 12      control 1      control 2      control 3

                                           control 4       control 5           control 6      control 7      control 8

Canada +1-514-494-2000 · USA +1-401-463-5605 · Mexico +52-656-630-0032 · Europe +44-1737-222-258

             Asia-Pacific +86-755-2993-6487 · India +91-80-41554753 · info@aimsolder.com · www.aimsolder.com

                                           AIM IS ISO9001:2008 & ISO14001:2004 CERTIFIED

The information contained herein is based on data considered accurate and is offered at no charge. Product information is based upon the

assumption of proper handling and operating conditions. All information pertaining to solder paste is produced with 45-micron powder.

Liability is expressly disclaimed for any loss or injury arising out of the use of this information or the use of any materials designated. Please

refer to http://www.aimsolder.com/Home/TermsConditions.aspx to review AIM's terms and conditions.

                                                                                                                                                    11/13

                                                                                                                                          Document Rev # 8
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

AIM - American Iron and Metal:

13283  13368  13308     13426  15033  13977  13211  13223  14315  14048  14054  14111  14076  14051
小广播

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程

北京市海淀区知春路23号集成电路设计园量子银座1305 电话:(010)82350740 邮编:100191

电子工程世界版权所有 京ICP证060456号 京ICP备10001474号 电信业务审批[2006]字第258号函 京公海网安备110108001534 Copyright © 2005-2020 EEWORLD.com.cn, Inc. All rights reserved